Cupra Formentor Bolt Pattern, Center Bore & Wheel Offset (2021–2025)
Cupra Formentor wheel fitment: 5x112 bolt pattern, 57.1mm center bore (2021–2025). OE wheel sizes and offsets for every Formentor variant we cover (5 guides),
- 5x112bolt pattern (PCD)
- 57.1 mmcenter bore
- M14x1.5 Boltwheel bolt / nut
- 5 guidesmodel years 2021–2025
Cupra Formentor wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2025 | Cupra Formentor | 5x112 | 57.1 mm | 18x8.0J |
| 2022 | Cupra Formentor VZ5 | 5x112 | 57.1 mm | 20x8.5J |
| 2021 | Cupra Formentor | 5x112 | 57.1 mm | 18x8.0J |
| 2021 | Cupra Formentor [UK] | 5x112 | 57.1 mm | 18x8.0J |
| 2021 | Cupra Formentor e-Hybrid [UK] | 5x112 | 57.1 mm | 18x8.0J |
Factory wheel sizes on the Cupra Formentor
Across the 5 Cupra Formentor trims with a documented factory wheel, the OE diameter is 18-20 inch, width 8-8.5J. A forged wheel that keeps the 5x112 bolt pattern and the 57.1 mm hub bore and matches the factory offset listed on the model page bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Forged wheels for the Cupra Formentor (5x112)
Shop all Cupra Formentor forged wheels →
Get a quote for Cupra Formentor wheels
Vehicles With the Same Hub as the Cupra Formentor (5x112, 57.1 mm Bore)
In our database, 395 other vehicle entries from 17 makes use exactly the same 5x112 bolt pattern and 57.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x112 is used by 21.7% of the vehicle entries in our database (1,410 of 6,503); 28.9% of those also use a 57.1 mm center bore.
Hub-Centric Rings for a 57.1 mm Center Bore
A wheel with a center bore larger than 57.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 60.1 mm | 60.1 → 57.1 mm |
| 63.4 mm | 63.4 → 57.1 mm |
| 64.1 mm | 64.1 → 57.1 mm |
| 65.1 mm | 65.1 → 57.1 mm |
| 73.1 mm | 73.1 → 57.1 mm |
ANKUSI forged wheels are bored to exactly 57.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Cupra Formentor?
The Cupra Formentor uses a 5x112 bolt pattern with a 57.1mm center bore across every Formentor variant in our database (5 guides, 2021–2025).
What is the Cupra Formentor center bore?
The hub-centric center bore is 57.1 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Cupra Formentor years share the same wheel fitment?
The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.
Which forged wheels fit the Cupra Formentor?
Any wheel drilled 5x112 with a 57.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.