Corvette OEM-Style Polished Slotted Dish Forged Wheels
Monoblock · Polished
2020 VinFast LUX SA2.0 SUV Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting VinFast LUX SA2.0 SUV wheels? This page gives the 2020 VinFast LUX SA2.0 SUV bolt pattern (5x120), centre bore, factory rim size and the offset range for aftermarket and forged VinFast LUX SA2.0 SUV rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2020 VinFast LUX SA2.0 SUV uses a 5x120 bolt pattern with a 74.1 mm centre bore. For aftermarket wheels, 20x9.5J ET38 front / 20x10.5J ET42 rear sits flush.
Forged wheels for the 2020 VinFast LUX SA2.0 SUV — drilled 5x120 with a 74.1 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
VinFast LUX SA2.0 SUV (2020): 5x120 bolt pattern, 74.1mm center bore, OE F 19x9J ET48 / R 19x10J ET53. Forged wheel fitment specs from ANKUSI.
Bolt Pattern5x120
Center Bore74.1mm
Wheel Load Rating900–1250 kg/wheel (SUV segment reference)
Year2020
Category5-Lug Large Sedan/SUV
Data check: the bolt pattern and center bore on this page have not yet been confirmed by a second independent source. Measure your hub or ask us before ordering. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Flush Fitment | F 20x9.5J ET38 / R 20x10.5J ET42 |
Forged Wheel Designs for the VinFast LUX SA2.0 SUV
Every design below is forged to order, so it can be machined to the VinFast LUX SA2.0 SUV's 5x120 bolt pattern and 74.1 mm center bore, with the width and offset calculated for your setup.
Brushed Silver Turbine Forged Wheels
Monoblock · Brushed Silver
APEX-Style Gloss Black 10 Y-Mesh Forged Wheels
Replica · Gloss Black
Wheelforce-Style Satin Blue Side-Milled Split 5-Spoke Forged Wheels
Monoblock · Satin Blue
Chrome Silver Petal Forged Wheels
Monoblock · Chrome Silver
Bright Silver 5 Y-Spoke Forged Wheels
Replica · Bright Silver
Vossen-Style Brushed Silver 5 Y-Spoke Forged Wheels
Monoblock · Brushed Silver
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
Because an SUV's center of gravity is already higher than a sedan's, anything added at the corners — including wheel weight — has an outsized effect on handling balance. A forged wheel lets us hit the visual stance owners want without adding the rotational mass a cast wheel of the same strength would carry.
The VinFast LUX SA2.0 SUV ships from the factory on a 5x120 bolt pattern with a 74.1mm center bore and a F 19x9J ET48 / R 19x10J ET53 wheel. Our flush reference for the VinFast LUX SA2.0 SUV is F 20x9.5J ET38 / R 20x10.5J ET42.; our maximum aggressive reference is F 21x10J ET35 / R 21x11.5J ET38. — beyond that, expect clearance issues against the fender liner without further modification.
VinFast LUX SA2.0 SUV OE Wheel Specs
The VinFast LUX SA2.0 SUV ships from the factory on 5x120 bolt pattern wheels with a 74.1mm center bore. The stock wheel size is F 19x9J ET48 / R 19x10J ET53, offering a balanced ride that suits most owners without any rubbing or clearance concerns.
Why the factory spec works for most owners:
- Balances ride comfort with steering response and highway efficiency.
- Wide tire and wheel availability at the factory diameter keeps replacement costs low.
- Lower unsprung weight than larger aftermarket wheels helps ride quality and acceleration.
- Guaranteed clearance against brake calipers and suspension components.
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the VinFast LUX SA2.0 SUV (2020) we drill the 5x120 pattern and cut the centre bore to 74.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 19x9J | ET48 | 6.89 in (175 mm) | — | — |
| Maximum | 21x10J | ET35 | 6.88 in (175 mm) | 0 mm | +26 mm |
Vehicles With the Same Hub as the VinFast LUX SA2.0 SUV (5x120, 74.1 mm Bore)
In our database, 34 other vehicle entries from 3 makes use exactly the same 5x120 bolt pattern and 74.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x120 is used by 10.3% of the vehicle pages in our English fitment guide (670 of 6,503); 5.2% of those also use a 74.1 mm center bore.
Hub-Centric Rings for a 74.1 mm Center Bore
A wheel with a center bore larger than 74.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 76.1 mm | 76.1 → 74.1 mm |
| 78.1 mm | 78.1 → 74.1 mm |
| 84.1 mm | 84.1 → 74.1 mm |
| 93.1 mm | 93.1 → 74.1 mm |
ANKUSI forged wheels are bored to exactly 74.1 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the VinFast LUX SA2.0 SUV use?
The 2020 VinFast LUX SA2.0 SUV uses a 5x120 bolt pattern.
How many lug bolts does the VinFast LUX SA2.0 SUV use?
The VinFast LUX SA2.0 SUV uses a 5-lug bolt pattern (5x120), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the VinFast LUX SA2.0 SUV?
The VinFast LUX SA2.0 SUV's center bore is 74.1mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What does a flush wheel fitment look like on the VinFast LUX SA2.0 SUV?
For a flush look with minimal to no rubbing, we recommend F 20x9.5J ET38 / R 20x10.5J ET42 as a starting point on a stock or mildly lowered VinFast LUX SA2.0 SUV.
Do I need wheel spacers for my VinFast LUX SA2.0 SUV?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my VinFast LUX SA2.0 SUV?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 6.75" backspacing up front and 7.4" in the rear.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my VinFast LUX SA2.0 SUV?
Yes — the VinFast LUX SA2.0 SUV's factory and our recommended flush/max fitments already use staggered sizing (different width front and rear), and ANKUSI can forge matching staggered sets to your target offsets.
Sources and Last Update
Data checked against: avtoreference.com, tirewheelguide.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 19x9 wheels · 19 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
Bolt pattern and center bore on this page come from published fitment references and are still awaiting a second independent check. Last reviewed 2026-09-18. Spotted an error? Email info@ankusi.com and we will verify and correct it.