Alfa Romeo Giulietta Bolt Pattern, Center Bore & Wheel Offset (1983–2019)
Alfa Romeo Giulietta wheel fitment: 5x110 bolt pattern, 65.1mm center bore (2011–2019); 4x98 bolt pattern, 58.6mm center bore. OE wheel sizes and offsets for
- 5x110bolt pattern (PCD), most common
- 65.1 mmcenter bore
- M12x1.5 Nutwheel bolt / nut
- 5 guidesmodel years 1983–2019
Bolt pattern by generation
- 5x110, 65.1 mm center bore — 2011–2019 (4 variants)
- 4x98, 58.6 mm center bore — 1983 (1 variants)
Alfa Romeo Giulietta wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2019 | Alfa Romeo Giulietta | 5x110 | 65.1 mm | 16x7.0J |
| 2017 | Alfa Romeo Giulietta | 5x110 | 65.1 mm | 16x7.0J |
| 2014 | Alfa Romeo Giulietta | 5x110 | 65.1 mm | 16x7.0J |
| 2011 | Alfa Romeo Giulietta | 5x110 | 65.1 mm | 16x7.0J |
| 1983 | Alfa Romeo Giulietta 2.0 Turbo | 4x98 | 58.6 mm | 14x6.0J |
Factory wheel sizes on the Alfa Romeo Giulietta
Across the 5 Alfa Romeo Giulietta trims with a documented factory wheel, the OE diameter is 14-16 inch, width 6-7J. A forged wheel that keeps the bolt pattern and hub bore of your generation (see the table above) and matches the factory offset listed on the model page bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Forged wheels for the Alfa Romeo Giulietta (5x110)
Shop all Alfa Romeo Giulietta forged wheels →
Get a quote for Alfa Romeo Giulietta wheels
Vehicles With the Same Hub as the Alfa Romeo Giulietta (5x110, 65.1 mm Bore)
In our database, 108 other vehicle entries from 18 makes use exactly the same 5x110 bolt pattern and 65.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x110 is used by 2.2% of the vehicle entries in our database (145 of 6,503); 96.6% of those also use a 65.1 mm center bore.
Hub-Centric Rings for a 65.1 mm Center Bore
A wheel with a center bore larger than 65.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 66.1 mm | 66.1 → 65.1 mm |
| 66.6 mm | 66.6 → 65.1 mm |
| 67.1 mm | 67.1 → 65.1 mm |
| 70.1 mm | 70.1 → 65.1 mm |
| 73.1 mm | 73.1 → 65.1 mm |
ANKUSI forged wheels are bored to exactly 65.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Alfa Romeo Giulietta?
The Alfa Romeo Giulietta uses a 5x110 bolt pattern on most variants we cover with a 65.1mm center bore. Other generations use 4x98 / 58.6mm (1983–1983). Always check the exact year and trim before ordering.
What is the Alfa Romeo Giulietta center bore?
The hub-centric center bore is 65.1 mm on the most common generation; see the table for variants. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Alfa Romeo Giulietta years share the same wheel fitment?
No. The bolt pattern or center bore changed between generations, so wheels are not interchangeable across all years. Use the year-by-year table on this page to pick the right specification.
Which forged wheels fit the Alfa Romeo Giulietta?
Any wheel drilled 5x110 with a 65.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.