Tesla OEM-Style Matte Silver 5 Y-Spoke Aero Centre Forged Wheels
Replica · Matte Silver
2021 Tesla Model Y Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Tesla Model Y wheels? This page gives the 2021 Tesla Model Y bolt pattern (5x114.3), centre bore, factory rim size and the offset range for aftermarket and forged Tesla Model Y rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Tesla Model Y (2021): 5x114.3 bolt pattern, 64.1mm center bore. Factory wheels: 19x9.5J at ET45 offset, front and rear. Reference fitment ranges.
Bolt Pattern5x114.3
Wheel Bolt/NutM14x1.5 Nut
Center Bore64.1mm
Wheel Load Rating800–950 kg/wheel (Crossover segment reference)
Year2021
CategoryCrossover
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 19x9.5J F/R |
| Flush Fitment | 20x10.0J at ET38 offset |
| Maximum Aggressive | 20x10.5J at ET35 offset |
Forged Wheel Designs for the Tesla Model Y
Every design below is forged to order, so it can be machined to the Tesla Model Y's 5x114.3 bolt pattern and 64.1 mm center bore, with the width and offset calculated for your setup.
Vossen Gloss Black 10 Y-Spoke Forged Wheels
Replica · Gloss Black
Vossen HF-5-Style Brushed Silver 5 Y-Spoke Side-Milled Forged Wheels
Replica · Brushed Silver
Tesla OEM-Style Brushed Silver 5 Y-Spoke Forged Wheels
Monoblock · Brushed Silver
Tesla OEM-Style Gloss Black 5 Y-Spoke Forged Wheels
Monoblock · Gloss Black
Vossen-Style Brushed Silver Turbine Dish Forged Wheels
Replica · Silver
Vossen-Style Brushed Silver Web-Mesh Forged Wheels
Replica · Bright Silver
Vossen-Style Brushed Silver Thin 20-Spoke Forged Wheels
Replica · Matte Silver
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
The Tesla Model Y's factory suspension tuning already accounts for a specific unsprung mass target. Forged construction lets ANKUSI match the factory strength spec while keeping rotational weight down, which is where the real handling benefit comes from on a taller, heavier SUV platform.
The Tesla Model Y runs a 5x114.3 bolt pattern, 64.1mm center bore, and a 19x9.5J, front and rear, wheel from the factory. Our Flush Fitment reference is 20x10.0J ET38, which tucks the tire under the fender lip on a stock-height Tesla Model Y. Our Maximum Aggressive reference is 20x10.5J ET35 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
Tesla Model Y OE Wheel Specs
The 2021 Tesla Model Y (Crossover) uses a 5x114.3 bolt pattern with a 64.1mm center bore. Factory wheels are 19x9.5J F/R.
Why the factory spec works for most owners:
- Supports the vehicle's curb weight and load capacity
- Preserves ground clearance for everyday and light off-road use
- Balances ride comfort with cargo and passenger stability
- Maintains clearance for the factory suspension travel and brake package
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Tesla Model Y (2021) we drill the 5x114.3 pattern and cut the centre bore to 64.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset & Backspacing Reference
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
- OE: 19x9.5J ET45 → ~7.02″ backspacing
- Flush: 20x10.0J ET38 → ~7″ backspacing
- Max: 20x10.5J ET35 → ~7.13″ backspacing
A Note on Clearance
Final clearance depends on the exact tire model, suspension height, brake package, alignment and vehicle tolerances. A physical test fit is recommended before production.
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Tesla spec, or want a wheel built to a custom offset for your Tesla Model Y? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.
Frequently Asked Questions
What bolt pattern (PCD) does the Tesla Model Y use?
The 2021 Tesla Model Y uses a 5x114.3 bolt pattern.
How many lug bolts does the Tesla Model Y use?
The Tesla Model Y uses a 5-lug bolt pattern (5x114.3), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Tesla Model Y?
The Tesla Model Y's center bore is 64.1mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Tesla Model Y?
Factory wheels on the Tesla Model Y are 19x9.5J F/R.
What is the biggest wheel size I can fit on my Tesla Model Y without rubbing?
The most aggressive fitment we recommend without fender work is 20x10.5J at ET35 offset. Going beyond this typically causes rubbing under compression unless you roll the fenders or add camber correction.
What does a flush wheel fitment look like on the Tesla Model Y?
For a flush look with minimal to no rubbing, we recommend 20x10.0J at ET38 offset as a starting point on a stock or mildly lowered Tesla Model Y.
Do I need wheel spacers for my Tesla Model Y?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Tesla Model Y?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 7" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Tesla Model Y?
The Tesla Model Y runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.