Advan-Style Metallic Gray 5-Spoke Forged Wheels
Porsche 911 / M3 Fitment · 5-Lug
2018-2019 Seat Leon Cupra R Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Seat Leon Cupra R wheels? This page gives the 2018-2019 Seat Leon Cupra R bolt pattern (5x112), centre bore, factory rim size and the offset range for aftermarket and forged Seat Leon Cupra R rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2018-2019 Seat Leon Cupra R uses a 5x112 bolt pattern with a 57.1 mm centre bore and M14x1.5 lug bolts. Factory wheels: 19x8.0J at ET40, front and rear.
Forged wheels for the 2018-2019 Seat Leon Cupra R — drilled 5x112 with a 57.1 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in about 25 days.
Get a quote for this car
Seat Leon Cupra R (2018-2019): 5x112 bolt pattern, 57.1mm center bore. Factory wheels: 19x8.0J F/R at ET40. Aftermarket sizes confirmed on request.
Bolt Pattern5x112
Wheel Bolt/NutM14x1.5 Bolt
Center Bore57.1mm
Wheel Load Rating650–750 kg/wheel (Standard Passenger Car segment reference)
Year2018-2019
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Built to order by ANKUSI — IATF 16949 & ISO 9001 certified forged wheel manufacturer, TÜV/SFI/VIA compliant. See our factory & certifications →
Forged wheels for the Seat Leon Cupra RMachined to the 5x112 bolt pattern and 57.1 mm bore · 14–24 inch · offset calculated for your car · 3D drawing before production
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
Hot hatches and performance compacts are built around quick direction changes, so rotational mass at the wheel has an outsized effect on how the car feels to drive. Forging trims that mass while holding the same strength margin as the factory wheel.
The Seat Leon Cupra R runs a 5x112 bolt pattern with a 57.1mm center bore from the factory. We haven't yet verified real-world Flush or Maximum Aggressive offset data for this exact generation from owner communities, so ANKUSI forges to this confirmed OE specification today — or to a wider custom offset once you tell us your target tire size and stance, rather than publishing invented aftermarket numbers.
Seat Leon Cupra R OE Wheel Specs
The 2018-2019 Seat Leon Cupra R (Hot Hatch) uses a 5x112 bolt pattern with a 57.1mm center bore. Factory wheels are 19x8.0J F/R at ET40.
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Seat Leon Cupra R (2018-2019) we drill the 5x112 pattern and cut the centre bore to 57.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Aftermarket Fitment: Confirmed on Request
We are still verifying real-world Flush and Maximum Aggressive reference fitments for this exact generation from owner communities, so we are not publishing offset ranges yet rather than guessing. Contact ANKUSI now with your target look and tire size and we will confirm a custom-offset forged wheel build for your Seat Leon Cupra R directly.
Custom Forged Wheels for the Seat Leon Cupra R (2018-2019)
Everything above is reference data. If you want wheels actually built to it, that is what ANKUSI does: we are a forged wheel factory in Guangzhou, China, IATF 16949 and ISO 9001 certified, forging on our own 10,000-ton press and producing over 120,000 wheels a year. Forging blank, CNC machining, finishing, coating and inspection all happen in the same building — nothing is subcontracted and nothing is relabelled from another manufacturer.
Every set is cut to order, so the 5x112 pattern and the 57.1mm centre bore are machined for this car specifically rather than shimmed with adaptor rings. Diameter, width, offset, concavity, monoblock or multi-piece construction and the finish are all yours to choose.
Designs we already tool for the 5x112 pattern — each one is re-cut to your sizes and offsets:
Mercedes-Benz OEM-Style Gloss Black Hole Disc Windowed Ring Forged Wheels – Mercedes G-Class / GLS Fitment (5-Lug)
Mercedes-Benz OEM-Style Satin Black Machined 5 Y-Spoke Forged Wheels – Mercedes S-Class / CLS Fitment (5-Lug)
Mercedes-Benz OEM-Style Brushed Silver Slotted Disc Forged Wheels – Mercedes C-Class / E-Class Fitment (5-Lug)
Mercedes-Benz OEM-Style Transparent Gray Brushed 10-Spoke Windowed Ring Forged Wheels – Mercedes GLC / GLE Fitment (5-Lug)Frequently Asked Questions
What bolt pattern (PCD) does the Seat Leon Cupra R use?
The 2018-2019 Seat Leon Cupra R uses a 5x112 bolt pattern.
What is the center bore size on the Seat Leon Cupra R?
The center bore is 57.1mm. If an aftermarket wheel has a larger center bore, hub-centric rings are recommended.
What size are the factory wheels on the Seat Leon Cupra R?
Factory wheels are 19x8.0J F/R at ET40.
Can I get a custom offset before your Flush/Max data is published?
Yes -- contact ANKUSI with your bolt pattern and target offset and we will confirm the correct forged wheel spec for your build now.
Vehicles With the Same Hub as the Seat Leon Cupra R (5x112, 57.1 mm Bore)
In our database, 407 other vehicle entries from 18 makes use exactly the same 5x112 bolt pattern and 57.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x112 is used by 21.6% of the vehicle pages in our English fitment guide (1,407 of 6,503); 29.0% of those also use a 57.1 mm center bore.
Seat Leon Cupra R: Specs by Model Year
| Year | Bolt pattern | Center bore | Factory wheel |
|---|---|---|---|
| 2003 | 5x100 | 57.1 mm | 18x7.5J ET38 |
| 2010 | 5x112 | 57.1 mm | 19x8J ET51 |
| 2018-2019 | 5x112 | 57.1 mm | 19x8J ET40 |
Check the model year before ordering: the specs change — bolt pattern 5x100 → 5x112 from 2010.
Hub-Centric Rings for a 57.1 mm Center Bore
A wheel with a center bore larger than 57.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 60.1 mm | 60.1 → 57.1 mm |
| 63.4 mm | 63.4 → 57.1 mm |
| 64.1 mm | 64.1 → 57.1 mm |
| 65.1 mm | 65.1 → 57.1 mm |
| 73.1 mm | 73.1 → 57.1 mm |
ANKUSI forged wheels are bored to exactly 57.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 19x8 wheels · 19 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
Forged Wheel Designs for the Seat Leon Cupra R
Every design below is forged to order, so it can be machined to the Seat Leon Cupra R's 5x112 bolt pattern and 57.1 mm center bore, with the width and offset calculated for your setup.
Gloss Black Multi-Spoke Turbine Forged Wheels
Mercedes-Benz S-Class / E-Class Fitment · 5-Lug
Silver 2-Piece 10 Y-Spoke Concave Forged Wheels
BMW 5 Series / 3 Series Fitment
RAYS VOLK RACING TE37-Style Gloss Copper Polished Lip 6-Spoke Forged Wheels
Toyota GR Supra MkV Final Edition Fitment · 18-20in, 5x112
Brushed Bright Silver 10 Y-Spoke Forged Wheels
Audi A6 / BMW 5 Series Fitment
Gloss Black 10 Y-Spoke Decorative Ring Forged Wheels
Porsche 911 / BMW M3 Fitment
BR Wheels-Style Mirror Polished Directional 5-Spoke 2-Piece Forged Wheels
BMW M3 / 911 Fitment · 5-Lug
Gloss Black Windowed Dish Forged Wheels
Porsche 911 / BMW M3 Fitment · 5-Lug
Bolt pattern and center bore on this page were cross-checked against at least two independent sources before publication. Last reviewed 2026-09-18. Spotted an error? Email info@ankusi.com and we will verify and correct it.