Opel OEM-Style Gloss Black Multi-Spoke Forged Wheels
Monoblock · Gloss Black
2006 Opel Vectra Caravan Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Opel Vectra Caravan wheels? This page gives the 2006 Opel Vectra Caravan bolt pattern (5x110), centre bore, factory rim size and the offset range for aftermarket and forged Opel Vectra Caravan rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2006 Opel Vectra Caravan uses a 5x110 bolt pattern with a 65.1 mm centre bore and M12x1.5 lug nuts. Factory wheels: 16x6.5J ET41. For aftermarket wheels, 17x7.5J ET35 sits flush.
Forged wheels for the 2006 Opel Vectra Caravan — drilled 5x110 with a 65.1 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Opel Vectra Caravan (2006): 5x110 bolt pattern, 65.1mm center bore, OE 16x6.5J ET41. Forged wheel fitment specs from ANKUSI.
Bolt Pattern5x110
Wheel Bolt/NutM12x1.5 Nut
Center Bore65.1mm
Wheel Load Rating700–850 kg/wheel (Performance / Sports Car segment reference)
Year2006
Category5-Lug Performance / Tuner
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 16x6.5J ET41 |
| Flush Fitment | 17x7.5J at ET35 offset |
Forged Wheel Designs for the Opel Vectra Caravan
Every design below is forged to order, so it can be machined to the Opel Vectra Caravan's 5x110 bolt pattern and 65.1 mm center bore, with the width and offset calculated for your setup.
Alfa Romeo OEM-Style Bronze Steelie-Style Riveted Forged Wheels
Monoblock · Bronze
Gloss White Full-Face Forged Wheels
Monoblock · Gloss White
Black / Machined Directional Multi-Spoke Forged Wheels
Monoblock · Gloss Black
Work-Style Gloss Black 5-Ring Forged Wheels
Monoblock · Gloss Black
Gloss Black 5-Spoke Forged Wheels
Monoblock · Gloss Black
Bright Silver Forged Wheels
Monoblock · Bright Silver
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
Minivans carry passengers and cargo across a wide range of loaded conditions, so the factory wheel spec is built around a conservative load margin. Forging lets us hold that same margin while trimming rotational mass, which shows up as smoother ride quality whether the vehicle is empty or fully loaded.
The Opel Vectra Caravan ships from the factory on a 5x110 bolt pattern with a 65.1mm center bore and a 16x6.5J ET41 wheel. Our flush reference for the Opel Vectra Caravan is 17x7.5J ET35.; our maximum aggressive reference is 18x8J ET30. — beyond that, expect clearance issues against the fender liner without further modification.
Opel Vectra Caravan OE Wheel Specs
The Opel Vectra Caravan ships from the factory on 5x110 bolt pattern wheels with a 65.1mm center bore. The stock wheel size is 16x6.5J ET41, offering a balanced ride that suits most owners without any rubbing or clearance concerns.
Why the factory spec works for most owners:
- Balances ride comfort with steering response and highway efficiency.
- Wide tire and wheel availability at the factory diameter keeps replacement costs low.
- Lower unsprung weight than larger aftermarket wheels helps ride quality and acceleration.
- Guaranteed clearance against brake calipers and suspension components.
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Opel Vectra Caravan (2006) we drill the 5x110 pattern and cut the centre bore to 65.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 16x6.5J | ET41 | 5.36 in (136 mm) | — | — |
| Flush | 17x7.5J | ET35 | 5.63 in (143 mm) | +7 mm | +19 mm |
| Maximum | 18x8J | ET30 | 5.68 in (144 mm) | +8 mm | +30 mm |
Vehicles With the Same Hub as the Opel Vectra Caravan (5x110, 65.1 mm Bore)
In our database, 139 other vehicle entries from 19 makes use exactly the same 5x110 bolt pattern and 65.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x110 is used by 2.2% of the vehicle pages in our English fitment guide (145 of 6,503); 96.6% of those also use a 65.1 mm center bore.
Hub-Centric Rings for a 65.1 mm Center Bore
A wheel with a center bore larger than 65.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 66.1 mm | 66.1 → 65.1 mm |
| 66.6 mm | 66.6 → 65.1 mm |
| 67.1 mm | 67.1 → 65.1 mm |
| 70.1 mm | 70.1 → 65.1 mm |
| 73.1 mm | 73.1 → 65.1 mm |
ANKUSI forged wheels are bored to exactly 65.1 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Opel Vectra Caravan use?
The 2006 Opel Vectra Caravan uses a 5x110 bolt pattern.
How many lug bolts does the Opel Vectra Caravan use?
The Opel Vectra Caravan uses a 5-lug bolt pattern (5x110), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Opel Vectra Caravan?
The Opel Vectra Caravan's center bore is 65.1mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Opel Vectra Caravan?
Factory wheels on the Opel Vectra Caravan are 16x6.5J ET41.
What does a flush wheel fitment look like on the Opel Vectra Caravan?
For a flush look with minimal to no rubbing, we recommend 17x7.5J at ET35 offset as a starting point on a stock or mildly lowered Opel Vectra Caravan.
Do I need wheel spacers for my Opel Vectra Caravan?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Opel Vectra Caravan?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 5.63" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Opel Vectra Caravan?
The Opel Vectra Caravan runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.
Sources and Last Update
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 16x6.5 wheels · 16 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.