
2017 Nissan Rogue One Star Wars Edition Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Nissan Rogue One Star Wars Edition wheels? This page gives the 2017 Nissan Rogue One Star Wars Edition bolt pattern (5x114.3), centre bore, factory rim size and the offset range for aftermarket and forged Nissan Rogue One Star Wars Edition rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Nissan Rogue One Star Wars Edition (2017): 5x114.3 bolt pattern, 66.1mm center bore. OE 17x7.0J ET40 F/R. Reference fitment ranges.
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 17x7.0J F/R |
| Flush Fitment | 18x8.0J at ET32 offset |
| Maximum Aggressive | 18x8.5J at ET28 offset |
Forged Wheel Designs for the Nissan Rogue One Star Wars Edition
Every design below is forged to order, so it can be machined to the Nissan Rogue One Star Wars Edition's 5x114.3 bolt pattern and 66.1 mm center bore, with the width and offset calculated for your setup.


Rays-Style Gloss Black 14-Spoke Polished Deep Lip Forged Wheels
Deep Dish · Gloss Black

Rays-Style Dark Blue 10-Spoke Forged Wheels
Replica · Blue

BBS RI-D-Style Bronze 5 Y-Spoke Forged Wheels
Replica · Bronze

Rays-Style Gunmetal 10 Y-Mesh Forged Wheels
Replica · Gunmetal

Rays Volk Racing TE37-Style Bronze Gold 6-Spoke Forged Wheels
Replica · Bronze Gold

Nissan Nismo Chrome 5-Spoke Forged Wheels
Monoblock · Chrome

HRE-Style Gunmetal 10 V-Spoke Deep Lip 2-Piece Forged Wheels
2-Piece · Gunmetal
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.


ANKUSI Engineering Expert Advice
SUVs carry more curb weight higher off the ground, so wheel strength and rotational mass both matter more than on a comparable sedan — a heavier wheel amplifies body roll and slows steering response exactly where the platform is already working hardest. Forging keeps the wheel light without giving up the load rating the factory suspension geometry was tuned around.
The Nissan Rogue One Star Wars Edition runs a 5x114.3 bolt pattern, 66.1mm center bore, and a 17x7.0J, front and rear, wheel from the factory. Our Flush Fitment reference is 18x8.0J ET32, which tucks the tire under the fender lip on a stock-height Nissan Rogue One Star Wars Edition. Our Maximum Aggressive reference is 18x8.5J ET28 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
Nissan Rogue One Star Wars Edition OE Wheel Specs
The 2017 Nissan Rogue One Star Wars Edition (SUV) uses a 5x114.3 bolt pattern with a 66.1mm center bore. Factory wheels are 17x7.0J F/R.
Why the factory spec works for most owners:
- Supports the vehicle's curb weight and load capacity
- Preserves ground clearance for everyday and light off-road use
- Balances ride comfort with cargo and passenger stability
- Maintains clearance for the factory suspension travel and brake package
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Nissan Rogue One Star Wars Edition (2017) we drill the 5x114.3 pattern and cut the centre bore to 66.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset & Backspacing Reference
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
- OE: 17x7.0J ET40 → ~5.57″ backspacing
- Flush: 18x8.0J ET32 → ~5.76″ backspacing
- Max: 18x8.5J ET28 → ~5.85″ backspacing
A Note on Clearance
Final clearance depends on the exact tire model, suspension height, brake package, alignment and vehicle tolerances. A physical test fit is recommended before production.
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Nissan spec, or want a wheel built to a custom offset for your Nissan Rogue One Star Wars Edition? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.
Frequently Asked Questions
What bolt pattern (PCD) does the Nissan Rogue One Star Wars Edition use?
How many lug bolts does the Nissan Rogue One Star Wars Edition use?
What is the center bore size on the Nissan Rogue One Star Wars Edition?
What size are the factory (stock) wheels on the Nissan Rogue One Star Wars Edition?
What is the biggest wheel size I can fit on my Nissan Rogue One Star Wars Edition without rubbing?
What does a flush wheel fitment look like on the Nissan Rogue One Star Wars Edition?
Do I need wheel spacers for my Nissan Rogue One Star Wars Edition?
How do I calculate wheel backspacing for my Nissan Rogue One Star Wars Edition?
What's the difference between wheel offset and backspacing?
Can I run staggered wheels (different sizes front and rear) on my Nissan Rogue One Star Wars Edition?
Wheel Installation Reference: Torque, Thread & TPMS
Thread & Fastener: M12x1.25, conical-seat lug nut.
Factory Torque Spec: 103-122 Nm (76-90 ft-lb). Range covers most Nissan passenger cars and crossovers on M12x1.25 studs.
TPMS: TPMS (Tire Pressure Monitoring System) has been federally mandated on all new light vehicles sold in the US since the 2008 model year. If your wheels use OE-style sensors, have them transferred or cloned to the new wheels at installation.
Tire Pressure: Always set tire pressure to the value on your vehicle's tire placard (driver's doorjamb or glovebox), not the max PSI printed on the tire sidewall — this is trim- and tire-size-specific and stays the same reference point when you switch to a different wheel and tire combination.
Reference data compiled from published OEM service specifications and cross-checked against independent repair sources; always confirm against your owner's manual or door-jamb placard before installation.