How many lug bolts does the NIO ET5 use?

The NIO ET5 uses a 5-lug bolt pattern (5x120), so you need a 5-lug forged wheel to bolt straight on.

Do I need wheel spacers for my NIO ET5?

No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.

What's the difference between wheel offset and backspacing?

Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.

Can I run staggered wheels (different sizes front and rear) on my NIO ET5?

The NIO ET5 runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.

← Fitment Guide · All NIO Fitment Guides · All NIO ET5 years & trims

2022 NIO ET5 Wheels & Rims: Bolt Pattern, Offset & Sizes

Q: What is the center bore size on the NIO ET5?

The NIO ET5's center bore is 62.5mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.

Fitting NIO ET5 wheels? This page gives the 2022 NIO ET5 bolt pattern (5x120), centre bore, factory rim size and the offset range for aftermarket and forged NIO ET5 rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.

NIO ET5 (2022): 5x120 bolt pattern, 62.5mm center bore. Factory tire size: 245/40R20. Aftermarket sizes confirmed on request.

Bolt Pattern5x120

Center Bore62.5mm

Year2022

CategorySedan

Data check: the bolt pattern and center bore on this page have not yet been confirmed by a second independent source. Measure your hub or ask us before ordering. How we verify

Use this spec on your site

Paste this code into a forum post, listing or web page to show the NIO ET5 2022 bolt pattern, center bore and factory wheel size. Free, no sign-up.

<iframe src="https://ankusiwheels.com/wp-content/uploads/ankusi-embed/lookup.html?vehicle=nio-et5-2022&card=1" width="100%" height="230" style="border:0;max-width:560px" loading="lazy" title="NIO ET5 2022 bolt pattern"></iframe>
<p style="font-size:13px"><a href="https://ankusiwheels.com/fitment-guide/nio-et5-2022/">NIO ET5 2022 bolt pattern and offset guide</a> by ANKUSI Wheels</p>

More free tools: bolt pattern lookup and offset calculator for your website.

Forged Wheel Designs for the NIO ET5

Every design below is forged to order, so it can be machined to the NIO ET5's 5x120 bolt pattern and 62.5 mm center bore, with the width and offset calculated for your setup.

NIO ET7 / Li Auto L9 Forged Wheels – Silver Full-Face, front view

Silver Full-Face Forged Wheels

Monoblock · Silver

NIO OEM-Style Satin Black Machined Twin Multi-Spoke Forged Wheels

Replica · Satin Black

NIO ET7 Forged Wheels

Monoblock · Silver

NIO OEM-Style Matte Gunmetal Machined 5-Spoke Forged Wheels

Monoblock · Gunmetal

Xpeng G9 / NIO ET7 Forged Wheels – Matte Silver Petal Cross Split-Spoke Side-Milled, front view

Matte Silver Petal Cross Split-Spoke Side-Milled Forged Wheels

Monoblock · Matte Silver

NIO ET7 / BMW 5 Series Forged Wheels – Black / Machined 10 Y-Spoke Machined Face, front view

Black / Machined 10 Y-Spoke Machined Face Forged Wheels

Monoblock · Black Machined

NIO OEM-Style Gloss Black Fine Y-Spoke Mesh Forged Wheels

Replica · Gloss Black

NIO ET7 / Li Auto L9 Forged Wheels – Gloss Black Directional Machined Face, front view

Gloss Black Directional Machined Face Forged Wheels

Monoblock · Gloss Black

How to Read Wheel Offset & Measurements

Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.

Diagram showing wheel measurement points: centerline, center bore diameter, PCD, offset, rim width and diameter — Centerline, center bore, PCD, offset, width & diameter

Diagram comparing positive, zero, and negative wheel offset relative to the wheel centerline — Positive vs. zero vs. negative offset

NIO ET5 OE Wheel Specs

The 2022 NIO ET5 (Sedan) uses a 5x120 bolt pattern with a 62.5mm center bore. The factory tire size is 245/40R20.

ANKUSI builds these wheels — we are the forging factory, not a reseller. For the NIO ET5 (2022) we drill the 5x120 pattern and cut the centre bore to 62.5mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.

IATF 16949 & ISO 9001 certified · own 10,000-ton press in Guangzhou · from a single set to a full container

Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.

The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.

Aftermarket Fitment: Confirmed on Request

We are still verifying real-world Flush and Maximum Aggressive reference fitments for this exact generation from owner communities, so we are not publishing offset ranges yet rather than guessing. Contact ANKUSI now with your target look and tire size and we will confirm a custom-offset forged wheel build for your NIO ET5 directly.

Frequently Asked Questions

What bolt pattern (PCD) does the NIO ET5 use?
The 2022 NIO ET5 uses a 5x120 bolt pattern.

What is the center bore size on the NIO ET5?
The center bore is 62.5mm. If an aftermarket wheel has a larger center bore, hub-centric rings are recommended.

What size are the factory wheels on the NIO ET5?
The factory tire size is 245/40R20.

Can I get a custom offset before your Flush/Max data is published?
Yes -- contact ANKUSI with your bolt pattern and target offset and we will confirm the correct forged wheel spec for your build now.

← Back to the full Fitment Guide · Browse forged wheels