Lucid OEM-Style Gloss Black / Red 5-Spoke Aero Forged Wheels
Monoblock · Gloss Black / Red
2023 Lucid Air Sapphire Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Lucid Air Sapphire wheels? This page gives the 2023 Lucid Air Sapphire bolt pattern (5x120), centre bore, factory rim size and the offset range for aftermarket and forged Lucid Air Sapphire rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2023 Lucid Air Sapphire uses a 5x120 bolt pattern with a 64.1 mm centre bore. For aftermarket wheels, 20x9.5J ET35 front / 21x10.5J ET40 rear sits flush.
Forged wheels for the 2023 Lucid Air Sapphire — drilled 5x120 with a 64.1 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Lucid Air Sapphire (2023): 5x120 bolt pattern, 64.1mm center bore, OE F 20x9J ET44 / R 21x10J ET51. Forged wheel fitment specs from ANKUSI.
Bolt Pattern5x120
Center Bore64.1mm
Wheel Load Rating700–850 kg/wheel (Performance / Sports Car segment reference)
Year2023
Category5-Lug Performance / Tuner
Data check: the bolt pattern and center bore on this page have not yet been confirmed by a second independent source. Measure your hub or ask us before ordering. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Flush Fitment | F 20x9.5J ET35 / R 21x10.5J ET40 |
Forged Wheel Designs for the Lucid Air Sapphire
Every design below is forged to order, so it can be machined to the Lucid Air Sapphire's 5x120 bolt pattern and 64.1 mm center bore, with the width and offset calculated for your setup.
APEX-Style Bright Silver 10-Spoke Polished Lip Forged Wheels
Monoblock · Bright Silver
BBS-Style Gunmetal 5 Split-Spoke Forged Wheels
Replica · Gunmetal
BBS RI-D-Style Bronze 5 Y-Spoke Forged Wheels
Replica · Bronze
Wheelforce-Style Transparent Gold 5 Y-Spoke Brushed Forged Wheels
Replica · Transparent Gold
Gloss Black Forged Wheels
Monoblock · Gloss Black
Rays-Style Gloss Black 5 Y-Spoke Forged Wheels
Monoblock · Gloss Black
Land Rover Range Rover Sport SV Carbon Forged Wheels
Monoblock · Carbon
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
A sedan's wheel spec is a balance point the factory tuned between ride comfort, steering feel, and everyday durability. Forging lets us hold that same structural margin while cutting rotational mass, which is where most of the real-world benefit — quicker steering response, marginally better ride — actually comes from.
The Lucid Air Sapphire ships from the factory on a 5x120 bolt pattern with a 64.1mm center bore and a F 20x9J ET44 / R 21x10J ET51 wheel. Our flush reference for the Lucid Air Sapphire is F 20x9.5J ET35 / R 21x10.5J ET40.; our maximum aggressive reference is F 21x10J ET30 / R 22x11J ET35. — beyond that, expect clearance issues against the fender liner without further modification.
Lucid Air Sapphire OE Wheel Specs
The Lucid Air Sapphire ships from the factory on 5x120 bolt pattern wheels with a 64.1mm center bore. The stock wheel size is F 20x9J ET44 / R 21x10J ET51, offering a balanced ride that suits most owners without any rubbing or clearance concerns.
Why the factory spec works for most owners:
- Balances ride comfort with steering response and highway efficiency.
- Wide tire and wheel availability at the factory diameter keeps replacement costs low.
- Lower unsprung weight than larger aftermarket wheels helps ride quality and acceleration.
- Guaranteed clearance against brake calipers and suspension components.
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Lucid Air Sapphire (2023) we drill the 5x120 pattern and cut the centre bore to 64.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 20x9J | ET44 | 6.73 in (171 mm) | — | — |
| Flush | 20x9.5J | ET35 | 6.63 in (168 mm) | −3 mm | +15 mm |
| Maximum | 21x10J | ET30 | 6.68 in (170 mm) | −1 mm | +27 mm |
Vehicles With the Same Hub as the Lucid Air Sapphire (5x120, 64.1 mm Bore)
In our database, 28 other vehicle entries from 8 makes use exactly the same 5x120 bolt pattern and 64.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x120 is used by 10.3% of the vehicle pages in our English fitment guide (670 of 6,503); 4.3% of those also use a 64.1 mm center bore.
Hub-Centric Rings for a 64.1 mm Center Bore
A wheel with a center bore larger than 64.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 65.1 mm | 65.1 → 64.1 mm |
| 66.1 mm | 66.1 → 64.1 mm |
| 66.6 mm | 66.6 → 64.1 mm |
| 67.1 mm | 67.1 → 64.1 mm |
| 73.1 mm | 73.1 → 64.1 mm |
ANKUSI forged wheels are bored to exactly 64.1 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Lucid Air Sapphire use?
The 2023 Lucid Air Sapphire uses a 5x120 bolt pattern.
How many lug bolts does the Lucid Air Sapphire use?
The Lucid Air Sapphire uses a 5-lug bolt pattern (5x120), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Lucid Air Sapphire?
The Lucid Air Sapphire's center bore is 64.1mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What does a flush wheel fitment look like on the Lucid Air Sapphire?
For a flush look with minimal to no rubbing, we recommend F 20x9.5J ET35 / R 21x10.5J ET40 as a starting point on a stock or mildly lowered Lucid Air Sapphire.
Do I need wheel spacers for my Lucid Air Sapphire?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Lucid Air Sapphire?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 6.63" backspacing up front and 7.32" in the rear.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Lucid Air Sapphire?
Yes — the Lucid Air Sapphire's factory and our recommended flush/max fitments already use staggered sizing (different width front and rear), and ANKUSI can forge matching staggered sets to your target offsets.
Sources and Last Update
Data checked against: avtoreference.com, tirewheelguide.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 20x9 wheels · 20 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
Bolt pattern and center bore on this page come from published fitment references and are still awaiting a second independent check. Last reviewed 2026-09-18. Spotted an error? Email info@ankusi.com and we will verify and correct it.