Lamborghini Revuelto Arena Ad Personam (2024) Wheel Fitment
Lamborghini Revuelto Arena Ad Personam (2024): 5x112 front / 5x120 rear bolt pattern, 57.1mm front / 70.1mm rear center bore, OE F 21x9.5J ET40 / R 22x12.5J ET54.
✓ Verified by ANKUSI's Engineering Team — IATF 16949 & ISO 9001 certified forged wheel manufacturer, TÜV/SFI/VIA compliant. See our factory & certifications →
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Flush Fitment | F 21x10J ET35 / R 22x13J ET50 |
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
On a supercar, wheel weight is one of the few remaining places to cut rotational mass without touching the powertrain or chassis the factory already optimized. Forging gets there at the same structural margin as the OE wheel, which is exactly the trade a car built around outright performance rewards.
The Lamborghini Revuelto Arena Ad Personam ships from the factory on a 5x112 front / 5x120 rear bolt pattern with a 57.1mm front / 70.1mm rear center bore and a F 21x9.5J ET40 / R 22x12.5J ET54 wheel. Our flush reference for the Lamborghini Revuelto Arena Ad Personam is F 21x10J ET35 / R 22x13J ET50.; our maximum aggressive reference is F 22x10J ET30 / R 23x13J ET45. — beyond that, expect clearance issues against the fender liner without further modification.
Lamborghini Revuelto Arena Ad Personam OE Wheel Specs
The Lamborghini Revuelto Arena Ad Personam ships from the factory on 5x112 front / 5x120 rear bolt pattern wheels with a 57.1mm front / 70.1mm rear center bore. The stock wheel size is F 21x9.5J ET40 / R 22x12.5J ET54, offering a balanced ride that suits most owners without any rubbing or clearance concerns.
Why the factory spec works for most owners:
- Balances ride comfort with steering response and highway efficiency.
- Wide tire and wheel availability at the factory diameter keeps replacement costs low.
- Lower unsprung weight than larger aftermarket wheels helps ride quality and acceleration.
- Guaranteed clearance against brake calipers and suspension components.
Flush Fitment
For a flush look without any body modification, most Lamborghini Revuelto Arena Ad Personam owners run F 21x10J ET35 / R 22x13J ET50. This setup tucks the wheel face closer to the fender lip while staying within safe load and clearance limits.
Maximum Aggressive Fitment
Owners chasing a more aggressive stance push to F 22x10J ET30 / R 23x13J ET45. Chassis: Active suspension. Brakes: Huge CCB clearance. Clearance should be verified before ordering, especially on lowered cars.
5-Tier Configuration Options
A – Factory-Style: 21x9.5J ET40
Recommended setup: Factory-matched forged replacement
Economy impact: None
Best for: Daily drivers, warranty-conscious owners
Appearance 5/10 | Comfort 10/10 | Install difficulty ★☆☆☆
Estimated cost range: $$ (OE replacement)
B – Comfortable Upgrade: F 21x10J ET38 / R 22x13J ET52
Recommended setup: Direct bolt-on, factory suspension
Economy impact: Minimal
Best for: Owners who want a mild upgrade with no compromise
Appearance 6/10 | Comfort 9/10 | Install difficulty ★☆☆☆
Estimated cost range: $$ - $$$
C – Balanced / Flush Fit: F 21x10J ET35 / R 22x13J ET50
Recommended setup: Flush forged wheels, stock or mild lowering
Economy impact: Slight increase
Best for: Enthusiasts wanting a flush look daily
Appearance 8/10 | Comfort 7/10 | Install difficulty ★★☆☆
Estimated cost range: $$$
D – Aggressive: F 21.5x10J ET33 / R 22.5x13J ET48
Recommended setup: Wider forged wheels, coilovers or lowering springs
Economy impact: Noticeable increase
Best for: Show-and-drive builds
Appearance 9/10 | Comfort 5/10 | Install difficulty ★★★☆
Estimated cost range: $$$$
E – Max Aggressive: F 22x10J ET30 / R 23x13J ET45
Recommended setup: Chassis: Active suspension. Brakes: Huge CCB clearance.
Economy impact: Significant increase
Best for: Show builds, weekend cars
Appearance 10/10 | Comfort 3/10 | Install difficulty ★★★★
Estimated cost range: $$$$$
Performance Comparison Matrix
| Wheel Spec | Tier A | Tier B | Tier C | Tier D | Tier E |
|---|---|---|---|---|---|
| Wheel Spec | 21x9.5J ET40 | F 21x10J ET38 / R 22x13J ET52 | F 21x10J ET35 / R 22x13J ET50 | F 21.5x10J ET33 / R 22.5x13J ET48 | F 22x10J ET30 / R 23x13J ET45 |
| Economy Impact | None | Minimal | Slight increase | Noticeable increase | Significant increase |
| Appearance | 5/10 | 6/10 | 8/10 | 9/10 | 10/10 |
| Comfort | 10/10 | 9/10 | 7/10 | 5/10 | 3/10 |
| Install Difficulty | ★☆☆☆ | ★☆☆☆ | ★★☆☆ | ★★★☆ | ★★★★ |
| Cost Range | $$ (OE replacement) | $$ - $$$ | $$$ | $$$$ | $$$$$ |
| Best For | Daily drivers, warranty-conscious owners | Owners who want a mild upgrade with no compromise | Enthusiasts wanting a flush look daily | Show-and-drive builds | Show builds, weekend cars |
Real-World Reference Cases
The following builds are compiled from typical ANKUSI customer configurations for this platform and are illustrative, not individually verified real-world builds.
Case 1: Daily Driver (Factory-Style)
Profile: Commuter prioritizing comfort and reliability.
Setup: F 21x9.5J ET40 / R 22x12.5J ET54 forged wheels, factory suspension.
Cost: $$ (OE replacement)
Outcome: No clearance issues, factory ride quality retained.
Case 2: Balanced Enthusiast (Balanced / Flush Fit)
Profile: Weekend driver wanting a flush stance without sacrificing daily usability.
Setup: F 21x10J ET35 / R 22x13J ET50 forged wheels.
Cost: $$$
Outcome: Flush fitment with acceptable ride comfort for daily use.
Case 3: Show Build (Max Aggressive)
Profile: Show-and-shine build prioritizing stance over comfort.
Setup: F 22x10J ET30 / R 23x13J ET45 forged wheels. Chassis: Active suspension. Brakes: Huge CCB clearance.
Cost: $$$$$
Outcome: Maximum aggressive stance; clearance verified case-by-case.
Decision Guide
Offset & Backspacing Reference
Backspacing is calculated as: wheel width (in) / 2 + offset (mm) / 25.4 + 0.5.
- OE 21x9.5J ET40: backspacing ≈ 6.82"
- Flush 21x10J ET35: backspacing ≈ 6.88"
- Max 22x10J ET30: backspacing ≈ 6.68"
Use our offset & backspacing calculator to fine-tune your fitment, or contact ANKUSI for a custom forged wheel quote for your Lamborghini Revuelto Arena Ad Personam.