Satin Gunmetal 5-Spoke Forged Wheels
Monoblock · Satin Gunmetal
Hyundai Elantra Bolt Pattern by Year, Offset & Wheel Sizes
Hyundai Elantra bolt pattern: 5x114.3. The table below gives the bolt pattern, centre bore and lug nut for each model year from 2009 to 2024; further down is the full 2024 spec sheet with factory rim size and offset range for aftermarket and forged rims.
Quick answer: The 2024 Hyundai Elantra uses a 5x114.3 bolt pattern with a 67.1 mm centre bore and M12x1.5 lug nuts. Factory wheels: 17x7J ET45. For aftermarket wheels, 18x8J ET40 sits flush.
Forged wheels for the 2024 Hyundai Elantra — drilled 5x114.3 with a 67.1 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Hyundai Elantra Bolt Pattern by Year (2009–2024)
Hyundai Elantra has used the 5x114.3 bolt pattern across the model years below. Check your exact year and body style before ordering wheels, then open the full guide for center bore, factory sizes and offset.
| Model year | Version | Bolt pattern | Center bore | Lug nut / bolt | Full guide |
|---|---|---|---|---|---|
| 2009 | Touring | 5x114.3 | 67.1mm | M12x1.5 Nut | 2009 Hyundai Elantra fitment |
| 2014 | Coupe | 5x114.3 | 67.1mm | M12x1.5 Nut | 2014 Hyundai Elantra fitment |
| 2014 | Sedan | 5x114.3 | 67.1mm | M12x1.5 Nut | 2014 Hyundai Elantra fitment |
| 2017 | Sport | 5x114.3 | 67.1mm | M12x1.5 Nut | 2017 Hyundai Elantra fitment |
| 2024 | All body styles | 5x114.3 | 67.1mm | M12x1.5 Nut | This page |
Generation-level rows are cross-checked against two independent published wheel-specification sources. Always confirm the hub on your own car before ordering.
Hyundai Elantra (2024): 5x114.3 bolt pattern, 67.1mm center bore, OE 17x7J ET45. Forged wheel fitment specs from ANKUSI.
Bolt Pattern5x114.3
Wheel Bolt/NutM12x1.5 Nut
Center Bore67.1mm
Wheel Load Rating700–850 kg/wheel (Performance / Sports Car segment reference)
Year2024
Category5-Lug Performance / Tuner
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 17x7J ET45 |
| Flush Fitment | 18x8J at ET40 offset |
Forged Wheel Designs for the Hyundai Elantra
Every design below is forged to order, so it can be machined to the Hyundai Elantra's 5x114.3 bolt pattern and 67.1 mm center bore, with the width and offset calculated for your setup.
Honda Civic Type R Forged Wheels
Monoblock
BBS-Style Hyper Silver 5 Split-Spoke Forged Wheels
Replica · Bright Silver
OZ Racing-Style Polished Turbofan Dish Riveted Lip Forged Wheels
2-Piece · Polished
Hyundai N Style Matte Silver Split-Spoke Machined Face Forged Wheels
Monoblock · Matte Silver
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
Most of the engineering value in a forged wheel over a cast one shows up in rotational mass, not outright strength — both can meet the same load rating, but the forged piece gets there lighter. On a sedan platform tuned for everyday balance, that weight saving is felt directly in steering response and ride quality.
The Hyundai Elantra ships from the factory on a 5x114.3 bolt pattern with a 67.1mm center bore and a 17x7J ET45 wheel. Our flush reference for the Hyundai Elantra is 18x8J ET40.; our maximum aggressive reference is 19x8.5J ET38. — beyond that, expect clearance issues against the fender liner without further modification.
Hyundai Elantra OE Wheel Specs
The Hyundai Elantra ships from the factory on 5x114.3 bolt pattern wheels with a 67.1mm center bore. The stock wheel size is 17x7J ET45, offering a balanced ride that suits most owners without any rubbing or clearance concerns.
Why the factory spec works for most owners:
- Balances ride comfort with steering response and highway efficiency.
- Wide tire and wheel availability at the factory diameter keeps replacement costs low.
- Lower unsprung weight than larger aftermarket wheels helps ride quality and acceleration.
- Guaranteed clearance against brake calipers and suspension components.
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Hyundai Elantra (2024) we drill the 5x114.3 pattern and cut the centre bore to 67.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 17x7J | ET45 | 5.77 in (147 mm) | — | — |
| Flush | 18x8J | ET40 | 6.07 in (154 mm) | +8 mm | +18 mm |
| Maximum | 19x8.5J | ET38 | 6.25 in (159 mm) | +12 mm | +26 mm |
Vehicles With the Same Hub as the Hyundai Elantra (5x114.3, 67.1 mm Bore)
In our database, 456 other vehicle entries from 30 makes use exactly the same 5x114.3 bolt pattern and 67.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x114.3 is used by 20.0% of the vehicle pages in our English fitment guide (1,300 of 6,503); 35.2% of those also use a 67.1 mm center bore.
Hub-Centric Rings for a 67.1 mm Center Bore
A wheel with a center bore larger than 67.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 70.1 mm | 70.1 → 67.1 mm |
| 70.5 mm | 70.5 → 67.1 mm |
| 71.6 mm | 71.6 → 67.1 mm |
| 72.6 mm | 72.6 → 67.1 mm |
| 73.1 mm | 73.1 → 67.1 mm |
ANKUSI forged wheels are bored to exactly 67.1 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Hyundai Elantra use?
The 2024 Hyundai Elantra uses a 5x114.3 bolt pattern.
How many lug bolts does the Hyundai Elantra use?
The Hyundai Elantra uses a 5-lug bolt pattern (5x114.3), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Hyundai Elantra?
The Hyundai Elantra's center bore is 67.1mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Hyundai Elantra?
Factory wheels on the Hyundai Elantra are 17x7J ET45.
What does a flush wheel fitment look like on the Hyundai Elantra?
For a flush look with minimal to no rubbing, we recommend 18x8J at ET40 offset as a starting point on a stock or mildly lowered Hyundai Elantra.
Do I need wheel spacers for my Hyundai Elantra?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Hyundai Elantra?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 6.07" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Hyundai Elantra?
The Hyundai Elantra runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.
Sources and Last Update
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 17x7 wheels · 17 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.