Edelweiss-Style LT3 Gloss Black 5-Spoke Y-Design Forged Wheels
Honda Civic Type R Fitment · 5-Lug
Honda Accord Bolt Pattern by Year, Offset & Wheel Sizes
Honda Accord bolt pattern: 4x114.3, 5x114.3. The table below gives the bolt pattern, centre bore and lug nut for each model year from 1990 to 2025; further down is the full 2025 spec sheet with factory rim size and offset range for aftermarket and forged rims.
Quick answer: The 2025 Honda Accord uses a 5x114.3 bolt pattern with a 64.1 mm centre bore and M12x1.5 lug nuts. Factory wheels: 19x8.5J at ET50, front and rear. For aftermarket wheels, 19x8.5J ET45 sits flush and 20x9.0J ET38 is the most aggressive fit.
Forged wheels for the 2025 Honda Accord — drilled 5x114.3 with a 64.1 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in about 25 days.
Get a quote for this car
Honda Accord Bolt Pattern by Year (1990–2025)
Honda Accord has used these bolt patterns: 4x114.3, 5x114.3 across the model years below. Check your exact year and body style before ordering wheels, then open the full guide for center bore, factory sizes and offset.
| Model year | Version | Bolt pattern | Center bore | Lug nut / bolt | Full guide |
|---|---|---|---|---|---|
| 1990-1997 | 4th/5th gen 4-cylinder | 4x114.3 | 64.1mm | M12x1.5 Nut | Generation summary |
| 1998-2002 | 6th gen 4-cylinder | 4x114.3 | 64.1mm | M12x1.5 Nut | Generation summary |
| 1998-2002 | 6th gen V6 | 5x114.3 | 64.1mm | M12x1.5 Nut | Generation summary |
| 2003-2007 | 7th gen | 5x114.3 | 64.1mm | M12x1.5 Nut | Generation summary |
| 2008-2012 | 8th gen | 5x114.3 | 64.1mm | M12x1.5 Nut | Generation summary |
| 2013-2017 | 9th gen | 5x114.3 | 64.1mm | M12x1.5 Nut | Generation summary |
| 2018-2022 | 10th gen | 5x114.3 | 64.1mm | M12x1.5 Nut | Generation summary |
| 2023-2024 | 11th gen | 5x114.3 | 64.1mm | M12x1.5 Nut | Generation summary |
| 2025 | All body styles | 5x114.3 | 64.1mm | M12x1.5 Nut | This page |
Generation-level rows are cross-checked against two independent published wheel-specification sources. Always confirm the hub on your own car before ordering.
Honda Accord (2025): 5x114.3 bolt pattern, 64.1mm center bore. Factory wheels: 19x8.5J at ET50 offset, front and rear. Reference fitment ranges.
Bolt Pattern5x114.3
Wheel Bolt/NutM12x1.5 Nut
Center Bore64.1mm
Wheel Load Rating650–750 kg/wheel (Standard Passenger Car segment reference)
Year2025
CategoryMidsize Sedan
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 25, 2026. How we verify
Built to order by ANKUSI — IATF 16949 & ISO 9001 certified forged wheel manufacturer, TÜV/SFI/VIA compliant. See our factory & certifications →
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 19x8.5J at ET50 offset, front and rear |
| Flush Fitment | 19x8.5J at ET45 offset |
| Maximum Aggressive | 20x9.0J at ET38 offset |
Forged wheels for the Honda AccordMachined to the 5x114.3 bolt pattern and 64.1 mm bore · 14–24 inch · offset calculated for your car · 3D drawing before production
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
The Accord's factory setup is built around ride comfort for a midsize sedan that spends most of its life on the highway, so a forged wheel's weight savings show up as reduced road noise transmission and a calmer ride at speed, not just a styling upgrade. That's a different value proposition than on a performance car, but it's a real one for the Accord's actual use case.
The Accord uses a 5x114.3 bolt pattern, 64.1mm center bore, and a 19x8.5J ET50 wheel from the factory, front and rear. Our Flush Fitment reference is also a 19x8.5J but at ET45, a modest offset change that fills the fender opening on a stock or mildly lowered car. Our Maximum Aggressive reference is a 20x9.0J at ET38 — past that, expect rubbing under compression without fender rolling or camber correction.
Honda Accord OE Wheel Specs
The 2025 Honda Accord (Midsize Sedan) uses a 5x114.3 bolt pattern with a 64.1mm center bore. Factory wheels are 19x8.5J at ET50 offset, front and rear.
Why the factory spec works for most owners:
- Balances ride comfort with everyday fuel efficiency
- A widely used size in this segment, so tire and wheel availability stays strong
- Keeps unsprung weight low for stable, predictable handling
- Maintains clearance for the factory brake calipers and suspension components
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Honda Accord (2025) we drill the 5x114.3 pattern and cut the centre bore to 64.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Flush Fitment
For a flush look, a 19x8.5J wheel at ET45 offset (front and rear) is a commonly used starting point — clearance must be verified on a stock or mildly lowered Honda Accord.
Maximum Aggressive Fitment
20x9.0J at ET38 offset is a more aggressive reference setup. Beyond this, expect rubbing under compression without fender rolling or camber correction.
5-Tier Configuration Options
A Factory-Style 19x8.5J ET50
Recommended setup: 19x8.5J ET50 | Economy impact: Negligible | Best for: Daily commuting, family use
Appearance: 7/10 | Comfort: 9.5/10 | Install difficulty: ★☆☆☆☆
Estimated cost: $1,200-1,500 (wheels + tires + install)
B Comfortable Upgrade 19x8.5J ET48
Recommended setup: 19x8.5J ET48 | Economy impact: -2 to -4% | Best for: Daily / street
Appearance: 8/10 | Comfort: 9/10 | Install difficulty: ★☆☆☆☆
Estimated cost: $1,950-2,550 (wheels + tires + install)
C Balanced / Flush Fit 19x8.5J ET45
Recommended setup: 19x8.5J ET45 | Economy impact: -4 to -6% | Best for: Street
Appearance: 8.5/10 | Comfort: 8/10 | Install difficulty: ★★☆☆☆
Estimated cost: $2,600-3,400 (wheels + tires + install)
D Aggressive 20x9.0J ET42
Recommended setup: 20x9.0J ET42 | Economy impact: -6 to -9% | Best for: Show / occasional track
Appearance: 9/10 | Comfort: 6.5/10 | Install difficulty: ★★★☆☆
Estimated cost: $3,900-5,000 (wheels + tires + install)
E Max Aggressive 20x9.0J ET38
Recommended setup: 20x9.0J ET38 | Economy impact: -8 to -12% | Best for: Show only
Appearance: 9.5/10 | Comfort: 4/10 | Install difficulty: ★★★★☆
Estimated cost: $4,800-6,200+ (wheels + tires + install)
Performance Comparison Matrix
| Metric | Tier A | Tier B | Tier C | Tier D | Tier E |
|---|---|---|---|---|---|
| Wheel Spec | 19x8.5J ET50 | 19x8.5J ET48 | 19x8.5J ET45 | 20x9.0J ET42 | 20x9.0J ET38 |
| Economy Impact | Negligible | -2 to -4% | -4 to -6% | -6 to -9% | -8 to -12% |
| Appearance | 7/10 | 8/10 | 8.5/10 | 9/10 | 9.5/10 |
| Comfort | 9.5/10 | 9/10 | 8/10 | 6.5/10 | 4/10 |
| Install Difficulty | ★☆☆☆☆ | ★☆☆☆☆ | ★★☆☆☆ | ★★★☆☆ | ★★★★☆ |
| Cost Range | $1,200-1,500 | $1,950-2,550 | $2,600-3,400 | $3,900-5,000 | $4,800-6,200+ |
| Best For | Daily commuting, family use | Daily / street | Street | Show / occasional track | Show only |
Real-World Reference Cases
The examples below are compiled from typical ANKUSI customer configurations and are labeled as reference cases, not individually verified real-world builds.
Case 1: Daily Driver (Factory-Style)
Profile: Everyday driving, prioritizes comfort and low running cost.
Setup: 19x8.5J ET50
Cost: ~$620
Outcome: Minimal visual change, ride and fuel economy essentially unaffected.
Case 2: Balanced Enthusiast (Balanced / Flush Fit)
Profile: Wants a sportier stance without sacrificing daily usability.
Setup: 19x8.5J ET45
Cost: ~$3,000
Outcome: Noticeable visual upgrade, fuel economy drop within the expected range.
Case 3: Show Build (Max Aggressive)
Profile: Built primarily for shows or occasional track/show use.
Setup: 20x9.0J ET38
Cost: ~$5,500
Outcome: Maximum visual impact; daily comfort and fuel economy are heavily compromised, physical test fit required before production.
Decision Guide
1
What's your primary use? Daily commuting → Tier A/B. Weekend street driving → Tier B/C. Show or occasional track use → Tier D/E.
2
What's your budget? Under $800 → Tier A. $800-3,400 → Tier B/C. $3,400+ → Tier D/E.
3
How much does fuel economy matter? Very important → Tier A. Somewhat important → Tier B/C. Not a priority → Tier D/E.
4
Still unsure? Tier C (Balanced / Flush Fit) is the default choice for most Honda Accord owners.
Offset & Backspacing Reference
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
- OE: 19x8.5J ET50 → ~6.72\" backspacing
- Flush: 19x8.5J ET45 → ~6.52\" backspacing
- Max: 20x9.0J ET38 → ~6.50\" backspacing
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or can't find your exact Honda spec, or want a wheel built to a custom offset for your Honda Accord? Contact ANKUSI with your bolt pattern and offset target and we'll confirm the correct forged wheel spec for your build.
Custom Forged Wheels for the Honda Accord (2025)
Everything above is reference data. If you want wheels actually built to it, that is what ANKUSI does: we are a forged wheel factory in Guangzhou, China, IATF 16949 and ISO 9001 certified, forging on our own 10,000-ton press and producing over 120,000 wheels a year. Forging blank, CNC machining, finishing, coating and inspection all happen in the same building — nothing is subcontracted and nothing is relabelled from another manufacturer.
Every set is cut to order, so the 5x114.3 pattern and the 64.1mm centre bore are machined for this car specifically rather than shimmed with adaptor rings. Diameter, width, offset, concavity, monoblock or multi-piece construction and the finish are all yours to choose — most Honda orders on this platform land somewhere between the 19x8.5J ET45 flush setup and the 20x9.0J ET38 aggressive setup referenced above.
Designs we already tool for the 5x114.3 pattern — each one is re-cut to your sizes and offsets:
Rays-Style Candy Blue 10-Spoke Forged Wheels – Honda Civic Type R / Subaru WRX Fitment (5-Lug)
Honda Civic / Accord Forged Wheels – Matte Silver Directional Milled Machined Face
Advan Racing GT-Style White 5-Spoke Forged Wheels – Toyota GR86 / Honda Civic Type R Fitment (5-Lug)
Honda OEM-Style Gloss White Custom Forged Wheels – Honda Civic / Accord Fitment (5-Lug)Frequently Asked Questions
What bolt pattern (PCD) does the Honda Accord use?
The 2025 Honda Accord uses a 5x114.3 bolt pattern.
How many lug bolts does the Honda Accord use?
The Honda Accord uses a 5-lug bolt pattern (5x114.3), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Honda Accord?
The Honda Accord's center bore is 64.1mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Honda Accord?
Factory wheels on the Honda Accord are 19x8.5J at ET50 offset, front and rear.
What is the biggest wheel size I can fit on my Honda Accord without rubbing?
The most aggressive fitment we recommend without fender work is 20x9.0J at ET38 offset. Going beyond this typically causes rubbing under compression unless you roll the fenders or add camber correction.
What does a flush wheel fitment look like on the Honda Accord?
For a flush look with minimal to no rubbing, we recommend 19x8.5J at ET45 offset as a starting point on a stock or mildly lowered Honda Accord.
Do I need wheel spacers for my Honda Accord?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Honda Accord?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 6.52" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Honda Accord?
The Honda Accord runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.
Vehicles With the Same Hub as the Honda Accord (5x114.3, 64.1 mm Bore)
In our database, 36 other vehicle entries from 7 makes use exactly the same 5x114.3 bolt pattern and 64.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x114.3 is used by 20.0% of the vehicle pages in our English fitment guide (1,300 of 6,503); 2.8% of those also use a 64.1 mm center bore.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 19x8.5J | ET50 | 6.72 in (171 mm) | — | — |
| Flush | 19x8.5J | ET45 | 6.52 in (166 mm) | −5 mm | +5 mm |
| Maximum | 20x9J | ET38 | 6.50 in (165 mm) | −6 mm | +18 mm |
Hub-Centric Rings for a 64.1 mm Center Bore
A wheel with a center bore larger than 64.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 65.1 mm | 65.1 → 64.1 mm |
| 66.1 mm | 66.1 → 64.1 mm |
| 66.6 mm | 66.6 → 64.1 mm |
| 67.1 mm | 67.1 → 64.1 mm |
| 73.1 mm | 73.1 → 64.1 mm |
ANKUSI forged wheels are bored to exactly 64.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 19x8.5 wheels · 19 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
Forged Wheel Designs for the Honda Accord
Every design below is forged to order, so it can be machined to the Honda Accord's 5x114.3 bolt pattern and 64.1 mm center bore, with the width and offset calculated for your setup.
Advan Racing Gloss Black 5-Spoke Forged Wheels - Honda S2000 / Toyota GR86 Fitment (5-Lug)
Advan-Style forged wheels featuring the racing gloss black 5-spoke design, forged to order at ANKUSI's Guangzhou plant. Bolt pattern, centre bore, diameter, width and offset are machined for your exact vehicle — this listing covers 5-lug applications.
Honda Civic / Mazda MX-5 Forged Wheels
Polished Silver 6-Spoke Deep Lip · 5-Lug
Honda OEM-Style Gloss White Custom Forged Wheels
Honda Civic / Accord Fitment · 5-Lug
BBS-Style Brushed Silver 10 Y-Split-Spoke Forged Wheels
BMW M3 F80 / Honda Civic Type R Fitment · 5-Lug
Advan Racing Metallic Gray 5-Spoke Deep Lip Forged Wheels - Honda S2000 / Toyota GR86 Fitment (5-Lug)
Forged wheels for the Honda S2000 featuring the advan racing metallic gray 5-spoke deep lip design, forged to order at ANKUSI's Guangzhou plant. Bolt pattern, centre bore, diameter, width and offset are machined for your exact vehicle — this listing covers 5-lug applications.
Honda Civic / Accord Forged Wheels
Custom Finish Machined Face
Honda S2000 / Toyota GR86 Forged Wheels
Gunmetal 6-Spoke Deep Lip
Bolt pattern and center bore on this page were cross-checked against at least two independent sources before publication. Last reviewed 2026-09-25. Spotted an error? Email info@ankusi.com and we will verify and correct it.