Chrysler 300 Forged Wheels
Replica
2005 Chrysler 300 Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Chrysler 300 wheels? This page gives the 2005 Chrysler 300 bolt pattern (5x115), centre bore, factory rim size and the offset range for aftermarket and forged Chrysler 300 rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Forged wheels for Chrysler 300 — styles, sizes & factory quote →
Chrysler 300 (2005): 5x115 bolt pattern, 71.5mm center bore. Factory wheels: 17x7.0J F/R. Reference fitment ranges.
Bolt Pattern5x115
Wheel Bolt/NutM14x1.5 Nut
Center Bore71.5mm
Wheel Load Rating650–750 kg/wheel (Standard Passenger Car segment reference)
Year2005
CategorySedan
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 17x7.0J F/R |
| Flush Fitment | 20x9.5J at ET22 offset |
| Maximum Aggressive | 20x10.5J at ET20 offset |
Forged Wheel Designs for the Chrysler 300
Every design below is forged to order, so it can be machined to the Chrysler 300's 5x115 bolt pattern and 71.5 mm center bore, with the width and offset calculated for your setup.
Chrysler OEM-Style Polished 5-Spoke Forged Wheels
Monoblock · Polished
HRE Performance 501-Style Black / Silver Wire Mesh 2-Piece Deep Lip Forged Wheels
2-Piece · Black / Silver
Bugatti OEM-Style Polished Directional Machined-Face Forged Wheels
Monoblock · Polished
Chrysler OEM-Style Gunmetal / Machined Split Forged Wheels
Monoblock · Gunmetal / Machined
Belak-Style Black Machined Split 5-Spoke Riveted Polished Lip Forged Drag Racing Wheels
Drag Racing · Black Machined
Mirror Polished 5-Spoke 3-Piece Forged Wheels
Monoblock · Mirror Polished
Belak-Style Gloss Black / Machined 5 Split-Spoke Forged Drag Racing Wheels
Drag Racing · Gloss Black / Machined
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
The Chrysler 300's factory wheel spec reflects a deliberate balance between comfort, steering feel and durability that the engineering team tuned for. Forging lets ANKUSI match that same strength target while trimming rotational mass — the part of a wheel upgrade that actually changes how the car drives, not just how it looks.
The Chrysler 300 runs a 5x115 bolt pattern, 71.5mm center bore, and a 17x7.0J, front and rear, wheel from the factory. Our Flush Fitment reference is 20x9.5J ET22, which tucks the tire under the fender lip on a stock-height Chrysler 300. Our Maximum Aggressive reference is 20x10.5J ET20 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
Chrysler 300 OE Wheel Specs
The 2005 Chrysler 300 (Sedan) uses a 5x115 bolt pattern with a 71.5mm center bore. Factory wheels are 17x7.0J F/R.
Why the factory spec works for most owners:
- Balances ride comfort with everyday fuel efficiency
- A widely used size in this segment, so tire and wheel availability stays strong
- Keeps unsprung weight low for stable, predictable handling
- Maintains clearance for the factory brake calipers and suspension components
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Chrysler 300 (2005) we drill the 5x115 pattern and cut the centre bore to 71.5mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset & Backspacing Reference
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
- OE: 17x7.0J ET24 → ~4.94″ backspacing
- Flush: 20x9.5J ET22 → ~6.12″ backspacing
- Max: 20x10.5J ET20 → ~6.54″ backspacing
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Chrysler spec, or want a wheel built to a custom offset for your Chrysler 300? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.
Frequently Asked Questions
What bolt pattern (PCD) does the Chrysler 300 use?
The 2005 Chrysler 300 uses a 5x115 bolt pattern.
How many lug bolts does the Chrysler 300 use?
The Chrysler 300 uses a 5-lug bolt pattern (5x115), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Chrysler 300?
The Chrysler 300's center bore is 71.5mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Chrysler 300?
Factory wheels on the Chrysler 300 are 17x7.0J F/R.
What is the biggest wheel size I can fit on my Chrysler 300 without rubbing?
The most aggressive fitment we recommend without fender work is 20x10.5J at ET20 offset. Going beyond this typically causes rubbing under compression unless you roll the fenders or add camber correction.
What does a flush wheel fitment look like on the Chrysler 300?
For a flush look with minimal to no rubbing, we recommend 20x9.5J at ET22 offset as a starting point on a stock or mildly lowered Chrysler 300.
Do I need wheel spacers for my Chrysler 300?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Chrysler 300?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 6.12" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Chrysler 300?
The Chrysler 300 runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.