2025 Changan UNI-V Wheels & Rims: Bolt Pattern, Offset & Sizes

Fitting Changan UNI-V wheels? This page gives the 2025 Changan UNI-V bolt pattern (5x114.3), centre bore, factory rim size and the offset range for aftermarket and forged Changan UNI-V rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.

Changan UNI-V (2025): 5x114.3 bolt pattern, 60.1mm center bore. Factory tire size: 235/45R18. Aftermarket sizes confirmed on request.

Bolt Pattern5x114.3
Center Bore60.1mm
Year2025
CategoryCoupe Sedan
Wheel Bolt/NutM12x1.5

Data check: the bolt pattern and center bore on this page have not yet been confirmed by a second independent source. Measure your hub or ask us before ordering. How we verify

Use this spec on your site

Paste this code into a forum post, listing or web page to show the Changan UNI-V 2025 bolt pattern, center bore and factory wheel size. Free, no sign-up.

<iframe src="https://ankusiwheels.com/wp-content/uploads/ankusi-embed/lookup.html?vehicle=changan-uni-v-2025&card=1" width="100%" height="230" style="border:0;max-width:560px" loading="lazy" title="Changan UNI-V 2025 bolt pattern"></iframe>
<p style="font-size:13px"><a href="https://ankusiwheels.com/fitment-guide/changan-uni-v-2025/">Changan UNI-V 2025 bolt pattern and offset guide</a> by ANKUSI Wheels</p>

More free tools: bolt pattern lookup and offset calculator for your website.

Forged Wheel Designs for the Changan UNI-V

Every design below is forged to order, so it can be machined to the Changan UNI-V's 5x114.3 bolt pattern and 60.1 mm center bore, with the width and offset calculated for your setup.

How to Read Wheel Offset & Measurements

Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.

Diagram showing wheel measurement points: centerline, center bore diameter, PCD, offset, rim width and diameter
Centerline, center bore, PCD, offset, width & diameter
Diagram comparing positive, zero, and negative wheel offset relative to the wheel centerline
Positive vs. zero vs. negative offset

Changan UNI-V OE Wheel Specs

The 2025 Changan UNI-V (Coupe Sedan) uses a 5x114.3 bolt pattern with a 60.1mm center bore. The factory tire size is 235/45R18.

ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Changan UNI-V (2025) we drill the 5x114.3 pattern and cut the centre bore to 60.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.

IATF 16949 & ISO 9001 certified · own 10,000-ton press in Guangzhou · from a single set to a full container

Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.

The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.

Aftermarket Fitment: Confirmed on Request

We are still verifying real-world Flush and Maximum Aggressive reference fitments for this exact generation from owner communities, so we are not publishing offset ranges yet rather than guessing. Contact ANKUSI now with your target look and tire size and we will confirm a custom-offset forged wheel build for your Changan UNI-V directly.

Frequently Asked Questions

What bolt pattern (PCD) does the Changan UNI-V use?
The 2025 Changan UNI-V uses a 5x114.3 bolt pattern.

What is the center bore size on the Changan UNI-V?
The center bore is 60.1mm. If an aftermarket wheel has a larger center bore, hub-centric rings are recommended.

What size are the factory wheels on the Changan UNI-V?
The factory tire size is 235/45R18.

Can I get a custom offset before your Flush/Max data is published?
Yes -- contact ANKUSI with your bolt pattern and target offset and we will confirm the correct forged wheel spec for your build now.

← Back to the full Fitment Guide · Browse forged wheels

Contact WhatsApp Get a Quote