2005 Brabus Smart fortwo Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Brabus Smart fortwo wheels? This page gives the 2005 Brabus Smart fortwo bolt pattern (3x112), centre bore, factory rim size and the offset range for aftermarket and forged Brabus Smart fortwo rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2005 Brabus Smart fortwo uses a 3x112 bolt pattern with a 57.1 mm centre bore and M14x1.5 lug bolts. Factory wheels: F: 15x5.0J R: 16x6.5J. For aftermarket wheels, 16x5.5J ET30 front / 17x7.0J ET30 rear sits flush and 16x6.0J ET25 front / 17x7.5J ET25 rear is the most aggressive fit.
Forged wheels for the 2005 Brabus Smart fortwo — drilled 3x112 with a 57.1 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Brabus Smart fortwo (2005): 3x112 bolt pattern, 57.1mm center bore. Factory wheels: F: 15x5.0J R: 16x6.5J. Reference fitment ranges.
Data check: the bolt pattern and center bore on this page have not yet been confirmed by a second independent source. Measure your hub or ask us before ordering. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | F: 15x5.0J R: 16x6.5J |
| Flush Fitment | F 16x5.5J ET30 / R 17x7.0J ET30 |
| Maximum Aggressive | F 16x6.0J ET25 / R 17x7.5J ET25 |
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
Hot hatches and performance compacts are built around quick direction changes, so rotational mass at the wheel has an outsized effect on how the car actually feels to drive. Forging trims that mass while holding the same strength margin as the factory wheel, which is exactly the trade-off this kind of platform rewards.
The Brabus Smart fortwo runs a 3x112 bolt pattern, 57.1mm center bore, and a F: 15x5.0J wheel from the factory. Our Flush Fitment reference is F 16x5.5J ET30 / R 17x7.0J ET30, which tucks the tire under the fender lip on a stock-height Brabus Smart fortwo. Our Maximum Aggressive reference is F 16x6.0J ET25 / R 17x7.5J ET25 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
Brabus Smart fortwo OE Wheel Specs
The 2005 Brabus Smart fortwo (Hatchback) uses a 3x112 bolt pattern with a 57.1mm center bore. Factory wheels are F: 15x5.0J R: 16x6.5J.
Why the factory spec works for most owners:
- Balances ride comfort with everyday drivability
- A commonly used size for this vehicle class, supporting parts and tire availability
- Maintains clearance for the factory suspension and brake components
- Provides stable, predictable handling across normal driving conditions
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Brabus Smart fortwo (2005) we drill the 3x112 pattern and cut the centre bore to 57.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset & Backspacing Reference
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
- OE: F 15x5.0J ET34 → ~4.34″ F backspacing, R 16x6.5J ET34 → ~5.09″ R backspacing
- Flush: F 16x5.5J ET30 → ~4.43″ F backspacing, R 17x7.0J ET30 → ~5.18″ R backspacing
- Max: F 16x6.0J ET25 → ~4.48″ F backspacing, R 17x7.5J ET25 → ~5.23″ R backspacing
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Brabus spec, or want a wheel built to a custom offset for your Brabus Smart fortwo? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.
Brabus Smart fortwo: Specs by Model Year
| Year | Bolt pattern | Center bore | Factory wheel |
|---|---|---|---|
| 2005 | 3x112 | 57.1 mm | 15x5J |
| 2017 | 4x100 | 60.1 mm | 16x6J |
Check the model year before ordering: the specs change — bolt pattern 3x112 → 4x100 from 2017; center bore 57.1 mm → 60.1 mm from 2017.
Vehicles With the Same Hub as the Brabus Smart fortwo (3x112, 57.1 mm Bore)
In our database, 12 other vehicle entries from 2 makes use exactly the same 3x112 bolt pattern and 57.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
3x112 is used by 0.2% of the vehicle pages in our English fitment guide (13 of 6,503); 100.0% of those also use a 57.1 mm center bore.
Hub-Centric Rings for a 57.1 mm Center Bore
A wheel with a center bore larger than 57.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 60.1 mm | 60.1 → 57.1 mm |
| 63.4 mm | 63.4 → 57.1 mm |
| 64.1 mm | 64.1 → 57.1 mm |
| 65.1 mm | 65.1 → 57.1 mm |
| 73.1 mm | 73.1 → 57.1 mm |
ANKUSI forged wheels are bored to exactly 57.1 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Brabus Smart fortwo use?
How many lug bolts does the Brabus Smart fortwo use?
What is the center bore size on the Brabus Smart fortwo?
What size are the factory (stock) wheels on the Brabus Smart fortwo?
What is the biggest wheel size I can fit on my Brabus Smart fortwo without rubbing?
What does a flush wheel fitment look like on the Brabus Smart fortwo?
Do I need wheel spacers for my Brabus Smart fortwo?
How do I calculate wheel backspacing for my Brabus Smart fortwo?
What's the difference between wheel offset and backspacing?
Can I run staggered wheels (different sizes front and rear) on my Brabus Smart fortwo?
Sources and Last Update
Data checked against: avtoreference.com, tirewheelguide.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 15x5 wheels · 15 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
Bolt pattern and center bore on this page come from published fitment references and are still awaiting a second independent check. Last reviewed 2026-09-18. Spotted an error? Email info@ankusi.com and we will verify and correct it.