Black / Machined 4-Spoke Forged Wheels
Monoblock · Black Machined
2017 Brabus Smart forfour Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Brabus Smart forfour wheels? This page gives the 2017 Brabus Smart forfour bolt pattern (4x100), centre bore, factory rim size and the offset range for aftermarket and forged Brabus Smart forfour rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2017 Brabus Smart forfour uses a 4x100 bolt pattern with a 60.1 mm centre bore and M14x1.5 lug bolts. Factory wheels: F: 16x6.0J R: 17x7.0J. For aftermarket wheels, 17x6.5J ET38 front / 18x7.5J ET35 rear sits flush and 17x7.0J ET35 front / 18x8.0J ET30 rear is the most aggressive fit.
Forged wheels for the 2017 Brabus Smart forfour — drilled 4x100 with a 60.1 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Brabus Smart forfour (2017): 4x100 bolt pattern, 60.1mm center bore. Factory wheels: F: 16x6.0J R: 17x7.0J. Reference fitment ranges.
Bolt Pattern4x100
Wheel Bolt/NutM14x1.5 Bolt
Center Bore60.1mm
Wheel Load Rating650–750 kg/wheel (Standard Passenger Car segment reference)
Year2017
CategoryHatchback
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | F: 16x6.0J R: 17x7.0J |
| Flush Fitment | F 17x6.5J ET38 / R 18x7.5J ET35 |
| Maximum Aggressive | F 17x7.0J ET35 / R 18x8.0J ET30 |
Forged Wheel Designs for the Brabus Smart forfour
Every design below is forged to order, so it can be machined to the Brabus Smart forfour's 4x100 bolt pattern and 60.1 mm center bore, with the width and offset calculated for your setup.
APEX-Style Matte Bronze 8 Y-Spoke Mesh Forged Wheels
Monoblock · Matte Bronze
APEX-Style Bright Silver 8 Twin-Spoke Mesh Forged Wheels
Monoblock · Bright Silver
Silver Round-Hole Steelie-Style Forged Wheels
Monoblock · Silver
OZ Racing-Style Gloss White 15-Spoke Forged Wheels
Monoblock · Gloss White
Bronze Gold Cross-Spoke Forged Wheels
Monoblock · Bronze Gold
Rays-Style Gunmetal Mesh Polished Deep Lip Forged Wheels
Deep Dish · Gunmetal
BBS-Style Gold Mesh Polished Lip Forged Wheels
Monoblock · Gold
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
On a compact performance platform, every pound of rotational mass fights the car's natural agility. A forged wheel keeps strength at the factory-rated level while cutting that rotational weight, which is where the driving-feel improvement actually comes from.
The Brabus Smart forfour runs a 4x100 bolt pattern, 60.1mm center bore, and a F: 16x6.0J wheel from the factory. Our Flush Fitment reference is F 17x6.5J ET38 / R 18x7.5J ET35, which tucks the tire under the fender lip on a stock-height Brabus Smart forfour. Our Maximum Aggressive reference is F 17x7.0J ET35 / R 18x8.0J ET30 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
Brabus Smart forfour OE Wheel Specs
The 2017 Brabus Smart forfour (Hatchback) uses a 4x100 bolt pattern with a 60.1mm center bore. Factory wheels are F: 16x6.0J R: 17x7.0J.
Why the factory spec works for most owners:
- Preserves the factory-tuned ride and steering feel
- A mainstream size for this segment, keeping tire choice wide and prices reasonable
- Leaves full clearance for the stock brakes and suspension hardware
- Keeps handling predictable and consistent in everyday conditions
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Brabus Smart forfour (2017) we drill the 4x100 pattern and cut the centre bore to 60.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset & Backspacing Reference
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
- OE: F 16x6.0J ET44 → ~5.23″ F backspacing, R 17x7.0J ET44 → ~5.73″ R backspacing
- Flush: F 17x6.5J ET38 → ~5.25″ F backspacing, R 18x7.5J ET35 → ~5.63″ R backspacing
- Max: F 17x7.0J ET35 → ~5.38″ F backspacing, R 18x8.0J ET30 → ~5.68″ R backspacing
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Brabus spec, or want a wheel built to a custom offset for your Brabus Smart forfour? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.
Vehicles With the Same Hub as the Brabus Smart forfour (4x100, 60.1 mm Bore)
In our database, 149 other vehicle entries from 10 makes use exactly the same 4x100 bolt pattern and 60.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
4x100 is used by 6.9% of the vehicle pages in our English fitment guide (451 of 6,503); 33.3% of those also use a 60.1 mm center bore.
Hub-Centric Rings for a 60.1 mm Center Bore
A wheel with a center bore larger than 60.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 63.4 mm | 63.4 → 60.1 mm |
| 64.1 mm | 64.1 → 60.1 mm |
| 65.1 mm | 65.1 → 60.1 mm |
| 66.1 mm | 66.1 → 60.1 mm |
| 73.1 mm | 73.1 → 60.1 mm |
ANKUSI forged wheels are bored to exactly 60.1 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Brabus Smart forfour use?
The 2017 Brabus Smart forfour uses a 4x100 bolt pattern.
How many lug bolts does the Brabus Smart forfour use?
The Brabus Smart forfour uses a 4-lug bolt pattern (4x100), so you need a 4-lug forged wheel to bolt straight on.
What is the center bore size on the Brabus Smart forfour?
The Brabus Smart forfour's center bore is 60.1mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Brabus Smart forfour?
Factory wheels on the Brabus Smart forfour are F: 16x6.0J R: 17x7.0J.
What is the biggest wheel size I can fit on my Brabus Smart forfour without rubbing?
The most aggressive fitment we recommend without fender work is F 17x7.0J ET35 / R 18x8.0J ET30. Going beyond this typically causes rubbing under compression unless you roll the fenders or add camber correction.
What does a flush wheel fitment look like on the Brabus Smart forfour?
For a flush look with minimal to no rubbing, we recommend F 17x6.5J ET38 / R 18x7.5J ET35 as a starting point on a stock or mildly lowered Brabus Smart forfour.
Do I need wheel spacers for my Brabus Smart forfour?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Brabus Smart forfour?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 5.25" backspacing up front and 5.63" in the rear.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Brabus Smart forfour?
Yes — the Brabus Smart forfour's factory and our recommended flush/max fitments already use staggered sizing (different width front and rear), and ANKUSI can forge matching staggered sets to your target offsets.
Sources and Last Update
Data checked against: avtoreference.com, tirewheelguide.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 16x6 wheels · 16 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.