2008 Brabus Ultimate 112 Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Brabus Ultimate 112 wheels? This page gives the 2008 Brabus Ultimate 112 bolt pattern (3x112), centre bore, factory rim size and the offset range for aftermarket and forged Brabus Ultimate 112 rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2008 Brabus Ultimate 112 uses a 3x112 bolt pattern with a 57.1 mm centre bore and M14x1.5 lug bolts. Factory wheels: F: 18x7.0J R: 18x8.5J. For aftermarket wheels, 18x7.5J ET30 front / 18x9.0J ET30 rear sits flush and 18x8.0J ET25 front / 18x9.5J ET25 rear is the most aggressive fit.
Forged wheels for the 2008 Brabus Ultimate 112 — drilled 3x112 with a 57.1 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Brabus Ultimate 112 (2008): 3x112 bolt pattern, 57.1mm center bore. Factory wheels: F: 18x7.0J R: 18x8.5J. Reference fitment ranges.
Data check: the bolt pattern and center bore on this page have not yet been confirmed by a second independent source. Measure your hub or ask us before ordering. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | F: 18x7.0J R: 18x8.5J |
| Flush Fitment | F 18x7.5J ET30 / R 18x9.0J ET30 |
| Maximum Aggressive | F 18x8.0J ET25 / R 18x9.5J ET25 |
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
Convertibles lose some of the structural rigidity a fixed roof provides, which means the suspension and wheels end up doing more of the work to keep the chassis composed. A forged wheel keeps unsprung mass down without sacrificing the strength margin the factory built in — useful on a platform that's already managing extra flex.
The Brabus Ultimate 112 runs a 3x112 bolt pattern, 57.1mm center bore, and a F: 18x7.0J wheel from the factory. Our Flush Fitment reference is F 18x7.5J ET30 / R 18x9.0J ET30, which tucks the tire under the fender lip on a stock-height Brabus Ultimate 112. Our Maximum Aggressive reference is F 18x8.0J ET25 / R 18x9.5J ET25 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
Brabus Ultimate 112 OE Wheel Specs
The 2008 Brabus Ultimate 112 (Convertible) uses a 3x112 bolt pattern with a 57.1mm center bore. Factory wheels are F: 18x7.0J R: 18x8.5J.
Why the factory spec works for most owners:
- Balances ride comfort with everyday drivability
- A commonly used size for this vehicle class, supporting parts and tire availability
- Maintains clearance for the factory suspension and brake components
- Provides stable, predictable handling across normal driving conditions
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Brabus Ultimate 112 (2008) we drill the 3x112 pattern and cut the centre bore to 57.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset & Backspacing Reference
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
- OE: F 18x7.0J ET34 → ~5.34″ F backspacing, R 18x8.5J ET34 → ~6.09″ R backspacing
- Flush: F 18x7.5J ET30 → ~5.43″ F backspacing, R 18x9.0J ET30 → ~6.18″ R backspacing
- Max: F 18x8.0J ET25 → ~5.48″ F backspacing, R 18x9.5J ET25 → ~6.23″ R backspacing
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Brabus spec, or want a wheel built to a custom offset for your Brabus Ultimate 112? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.
Brabus Ultimate 112: Specs by Model Year
| Year | Bolt pattern | Center bore | Factory wheel |
|---|---|---|---|
| 2007 | 3x112 | 57.1 mm | 18x7J |
| 2008 | 3x112 | 57.1 mm | 18x7J |
Bolt pattern and center bore stay the same across all 2 model years in our database (2007–2008).
Vehicles With the Same Hub as the Brabus Ultimate 112 (3x112, 57.1 mm Bore)
In our database, 12 other vehicle entries from 2 makes use exactly the same 3x112 bolt pattern and 57.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
3x112 is used by 0.2% of the vehicle pages in our English fitment guide (13 of 6,503); 100.0% of those also use a 57.1 mm center bore.
Hub-Centric Rings for a 57.1 mm Center Bore
A wheel with a center bore larger than 57.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 60.1 mm | 60.1 → 57.1 mm |
| 63.4 mm | 63.4 → 57.1 mm |
| 64.1 mm | 64.1 → 57.1 mm |
| 65.1 mm | 65.1 → 57.1 mm |
| 73.1 mm | 73.1 → 57.1 mm |
ANKUSI forged wheels are bored to exactly 57.1 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Brabus Ultimate 112 use?
How many lug bolts does the Brabus Ultimate 112 use?
What is the center bore size on the Brabus Ultimate 112?
What size are the factory (stock) wheels on the Brabus Ultimate 112?
What is the biggest wheel size I can fit on my Brabus Ultimate 112 without rubbing?
What does a flush wheel fitment look like on the Brabus Ultimate 112?
Do I need wheel spacers for my Brabus Ultimate 112?
How do I calculate wheel backspacing for my Brabus Ultimate 112?
What's the difference between wheel offset and backspacing?
Can I run staggered wheels (different sizes front and rear) on my Brabus Ultimate 112?
Sources and Last Update
Data checked against: avtoreference.com, tirewheelguide.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 18x7 wheels · 18 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
Bolt pattern and center bore on this page come from published fitment references and are still awaiting a second independent check. Last reviewed 2026-09-18. Spotted an error? Email info@ankusi.com and we will verify and correct it.