Custom Forged Wheels for the Nissan Xterra (6x114.3)
ANKUSI forges custom wheels for the Nissan Xterra, drilled 6x114.3 with a 66.1 mm hub-centric bore, so no hub rings or adapters are needed. The factory wheel size in our database is 16x7J ET30 (model year 2009).
Recommended wheel sizes for the Nissan Xterra
| Type | Size | Offset |
|---|---|---|
| Factory (OE) | 16x7J | ET30 |
| Flush | 16x8J | ET15 |
| Max | 17x8.5J | ET0 |
Flush and max sizes are recommendations from our fitment database; check real clearance on your car before ordering. See bolt pattern and center bore by year for the Nissan Xterra
Forged wheels that can be drilled for the Nissan Xterra
Get a quote for Nissan Xterra wheels
Vehicles With the Same Hub as the Nissan Xterra (6x114.3, 66.1 mm Bore)
In our database, 4 other vehicle entries from 3 makes use exactly the same 6x114.3 bolt pattern and 66.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
6x114.3 is used by 0.5% of the vehicle entries in our database (30 of 6,503); 53.3% of those also use a 66.1 mm center bore.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 16x7J | ET30 | 5.18 in (132 mm) | — | — |
| Flush | 16x8J | ET15 | 5.09 in (129 mm) | −2 mm | +28 mm |
| Maximum | 17x8.5J | ET0 | 4.75 in (121 mm) | −11 mm | +49 mm |
Hub-Centric Rings for a 66.1 mm Center Bore
A wheel with a center bore larger than 66.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 66.6 mm | 66.6 → 66.1 mm |
| 67.1 mm | 67.1 → 66.1 mm |
| 70.1 mm | 70.1 → 66.1 mm |
| 70.5 mm | 70.5 → 66.1 mm |
| 73.1 mm | 73.1 → 66.1 mm |
ANKUSI forged wheels are bored to exactly 66.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
How to order
- Send your model, year and the size you want on WhatsApp.
- Our team confirms bolt pattern, center bore and offset for your car.
- The set is forged and machined to order in about 25 days, then shipped.
FAQ
How long do custom forged wheels for the Nissan Xterra take?
About 25 days of production after the specs are confirmed. Every wheel is drilled 6x114.3 with a 66.1 mm center bore.
What is the factory wheel size of the Nissan Xterra?
The factory size in our database is 16x7J ET30. It can vary by trim, so check your exact car before ordering.
What wheel size fits the Nissan Xterra flush?
We recommend 16x8J ET15 for a flush fit and 17x8.5J ET0 as the maximum. Check clearance before ordering.