Toyota Land Cruiser 70 Bolt Pattern, Center Bore & Wheel Offset (2008–2026)
Toyota Land Cruiser 70 wheel fitment: 5x150 bolt pattern, 110.1mm center bore (2008–2026). OE wheel sizes and offsets for every Land Cruiser 70 variant we cov
- 5x150bolt pattern (PCD)
- 110.1 mmcenter bore
- Nutwheel bolt / nut
- 2 guidesmodel years 2008–2026
Toyota Land Cruiser 70 wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2026 | Toyota Land Cruiser 70 | 5x150 | 110.1 mm | 16x7J |
| 2008 | Toyota Land Cruiser 70 | 5x150 | 110.1 mm | 16x7J |
Factory wheel sizes on the Toyota Land Cruiser 70
Across the 2 Toyota Land Cruiser 70 trims with a documented factory wheel, the OE diameter is 16 inch, width 7J. A forged wheel that keeps the 5x150 bolt pattern and the 110.1 mm hub bore and matches the factory offset listed on the model page bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Forged wheels for the Toyota Land Cruiser 70 (5x150)
Get a quote for Toyota Land Cruiser 70 wheels
Vehicles With the Same Hub as the Toyota Land Cruiser 70 (5x150, 110.1 mm Bore)
In our database, 4 other vehicle entries from 3 makes use exactly the same 5x150 bolt pattern and 110.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x150 is used by 0.2% of the vehicle entries in our database (13 of 6,396); 100.0% of those also use a 110.1 mm center bore.
Hub-Centric Rings for a 110.1 mm Center Bore
A wheel with a center bore larger than 110.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 130.1 mm | 130.1 → 110.1 mm |
ANKUSI forged wheels are bored to exactly 110.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Toyota Land Cruiser 70?
The Toyota Land Cruiser 70 uses a 5x150 bolt pattern with a 110.1mm center bore across every Land Cruiser 70 variant in our database (2 guides, 2008–2026).
What is the Toyota Land Cruiser 70 center bore?
The hub-centric center bore is 110.1 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Toyota Land Cruiser 70 years share the same wheel fitment?
The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.
Which forged wheels fit the Toyota Land Cruiser 70?
Any wheel drilled 5x150 with a 110.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.