
Citroen OEM-Style Matte Black 10-Spoke Forged Wheels
Monoblock · Matte Black
Fitting Citroen e-Mehari wheels? This page gives the 2018 Citroen e-Mehari bolt pattern (4x108), centre bore, factory rim size and the offset range for aftermarket and forged Citroen e-Mehari rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Forged wheels for Citroen e-Mehari — styles, sizes & factory quote →
Citroen e-Mehari (2018): 4x108 bolt pattern, 65.1mm center bore. Factory wheels: 15x5.5J F/R. Reference fitment ranges.
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 15x5.5J F/R |
| Flush Fitment | 16x6.5J at ET20 offset |
| Maximum Aggressive | 17x7.0J at ET15 offset |
Every design below is forged to order, so it can be machined to the Citroen e-Mehari's 4x108 bolt pattern and 65.1 mm center bore, with the width and offset calculated for your setup.

Monoblock · Matte Black

Monoblock · Gloss White

Monoblock · Bronze Gold

Deep Dish · Gunmetal

Monoblock · Matte Silver

Monoblock · Black Machined

Monoblock · Matte Bronze

Monoblock · Bright Silver
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.


With less structural stiffness from the missing roof, a convertible's suspension tuning leans more heavily on unsprung mass control. Forged construction keeps wheel weight down at the same strength rating, which is one less variable working against the Citroen e-Mehari's chassis.
The Citroen e-Mehari runs a 4x108 bolt pattern, 65.1mm center bore, and a 15x5.5J, front and rear, wheel from the factory. Our Flush Fitment reference is 16x6.5J ET20, which tucks the tire under the fender lip on a stock-height Citroen e-Mehari. Our Maximum Aggressive reference is 17x7.0J ET15 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
The 2018 Citroen e-Mehari (Convertible) uses a 4x108 bolt pattern with a 65.1mm center bore. Factory wheels are 15x5.5J F/R.
Why the factory spec works for most owners:
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Citroen e-Mehari (2018) we drill the 4x108 pattern and cut the centre bore to 65.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Citroen spec, or want a wheel built to a custom offset for your Citroen e-Mehari? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.