Aston Martin OEM-Style Gloss Black 10 Y-Spoke Forged Wheels
Monoblock · Gloss Black
1992 Aston Martin V8 Vantage Vol LWB Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Aston Martin V8 Vantage Vol LWB wheels? This page gives the 1992 Aston Martin V8 Vantage Vol LWB bolt pattern (5x120.65), centre bore, factory rim size and the offset range for aftermarket and forged Aston Martin V8 Vantage Vol LWB rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 1992 Aston Martin V8 Vantage Vol LWB uses a 5x120.65 bolt pattern with a 73.8 mm centre bore and M14x1.5 lug nuts. Factory wheels: F: 16x8.0J R: 16x9.0J. For aftermarket wheels, 17x8.5J ET15 sits flush and 18x9.5J ET12 is the most aggressive fit.
Forged wheels for the 1992 Aston Martin V8 Vantage Vol LWB — drilled 5x120.65 with a 73.8 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Aston Martin V8 Vantage Vol LWB (1992): 5x120.65 bolt pattern, 73.8mm center bore. Factory wheels: F: 16x8.0J R: 16x9.0J. Reference fitment ranges.
Bolt Pattern5x120.65
Wheel Bolt/NutM14x1.5 Nut
Center Bore73.8mm
Wheel Load Rating650–750 kg/wheel (Standard Passenger Car segment reference)
Caliper TypeBrembo 4- or 6-piston fixed caliper (OEM, standard across Aston Martin lineup, iron-rotor variants)
Year1992
CategoryConvertible
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | F: 16x8.0J R: 16x9.0J |
| Flush Fitment | 17x8.5J at ET15 offset |
| Maximum Aggressive | 18x9.5J at ET12 offset |
Forged Wheel Designs for the Aston Martin V8 Vantage Vol LWB
Every design below is forged to order, so it can be machined to the Aston Martin V8 Vantage Vol LWB's 5x120.65 bolt pattern and 73.8 mm center bore, with the width and offset calculated for your setup.
Aston Martin OEM-Style Gloss Black 10 Y-Spoke Machined Face Forged Wheels
Monoblock · Gloss Black
Corvette OEM-Style Matte Silver 5 Y-Spoke Deep Dish 2-Piece Forged Wheels
2-Piece · Matte Silver
Corvette OEM-Style Gunmetal 5 Y-Spoke Concave Forged Wheels
Monoblock · Gunmetal
Corvette OEM-Style Brushed Silver 10 Y-Spoke Machined Face Forged Wheels
Monoblock · Brushed Silver
Corvette OEM-Style Gunmetal 5 Y-Spoke Forged Wheels
Monoblock · Gunmetal
Corvette OEM-Style Polished Silver 5 Y-Spoke Beadlock Off-Road Forged Wheels
Off-Road Beadlock · Polished Silver
Forged SA-Style Gunmetal Multi-Spoke Silver Ring Beadlock Forged Wheels
Off-Road Beadlock · Gunmetal / Silver Ring
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
Convertibles lose some of the structural rigidity a fixed roof provides, which means the suspension and wheels end up doing more of the work to keep the chassis composed. A forged wheel keeps unsprung mass down without sacrificing the strength margin the factory built in — useful on a platform that's already managing extra flex.
The Aston Martin V8 Vantage Vol LWB runs a 5x120.65 bolt pattern, 73.8mm center bore, and a F: 16x8.0J wheel from the factory. Our Flush Fitment reference is 17x8.5J ET15, which tucks the tire under the fender lip on a stock-height Aston Martin V8 Vantage Vol LWB. Our Maximum Aggressive reference is 18x9.5J ET12 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
Aston Martin V8 Vantage Vol LWB OE Wheel Specs
The 1992 Aston Martin V8 Vantage Vol LWB (Convertible) uses a 5x120.65 bolt pattern with a 73.8mm center bore. Factory wheels are F: 16x8.0J R: 16x9.0J.
Why the factory spec works for most owners:
- Balances ride comfort with everyday drivability
- A commonly used size for this vehicle class, supporting parts and tire availability
- Maintains clearance for the factory suspension and brake components
- Provides stable, predictable handling across normal driving conditions
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Aston Martin V8 Vantage Vol LWB (1992) we drill the 5x120.65 pattern and cut the centre bore to 73.8mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset & Backspacing Reference
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
- OE: F 16x8.0J ET20 → ~5.29″ F backspacing, R 16x9.0J ET20 → ~5.79″ R backspacing
- Flush: 17x8.5J ET15 → ~5.34″ backspacing
- Max: 18x9.5J ET12 → ~5.72″ backspacing
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Aston Martin spec, or want a wheel built to a custom offset for your Aston Martin V8 Vantage Vol LWB? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.
Vehicles With the Same Hub as the Aston Martin V8 Vantage Vol LWB (5x120.65, 73.8 mm Bore)
In our database, 25 other vehicle entries from 2 makes use exactly the same 5x120.65 bolt pattern and 73.8 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x120.65 is used by 1.6% of the vehicle pages in our English fitment guide (101 of 6,503); 25.7% of those also use a 73.8 mm center bore.
Hub-Centric Rings for a 73.8 mm Center Bore
A wheel with a center bore larger than 73.8 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 74.1 mm | 74.1 → 73.8 mm |
| 76.1 mm | 76.1 → 73.8 mm |
| 78.1 mm | 78.1 → 73.8 mm |
| 84.1 mm | 84.1 → 73.8 mm |
ANKUSI forged wheels are bored to exactly 73.8 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Aston Martin V8 Vantage Vol LWB use?
The 1992 Aston Martin V8 Vantage Vol LWB uses a 5x120.65 bolt pattern.
How many lug bolts does the Aston Martin V8 Vantage Vol LWB use?
The Aston Martin V8 Vantage Vol LWB uses a 5-lug bolt pattern (5x120.65), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Aston Martin V8 Vantage Vol LWB?
The Aston Martin V8 Vantage Vol LWB's center bore is 73.8mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Aston Martin V8 Vantage Vol LWB?
Factory wheels on the Aston Martin V8 Vantage Vol LWB are F: 16x8.0J R: 16x9.0J.
What is the biggest wheel size I can fit on my Aston Martin V8 Vantage Vol LWB without rubbing?
The most aggressive fitment we recommend without fender work is 18x9.5J at ET12 offset. Going beyond this typically causes rubbing under compression unless you roll the fenders or add camber correction.
What does a flush wheel fitment look like on the Aston Martin V8 Vantage Vol LWB?
For a flush look with minimal to no rubbing, we recommend 17x8.5J at ET15 offset as a starting point on a stock or mildly lowered Aston Martin V8 Vantage Vol LWB.
Do I need wheel spacers for my Aston Martin V8 Vantage Vol LWB?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Aston Martin V8 Vantage Vol LWB?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 5.34" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Aston Martin V8 Vantage Vol LWB?
The Aston Martin V8 Vantage Vol LWB runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.
Sources and Last Update
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 16x8 wheels · 16 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.