VinFast LUX Bolt Pattern, Center Bore & Wheel Offset (2020)
VinFast LUX wheel fitment: 5x120 bolt pattern, 74.1mm center bore. OE wheel sizes and offsets for every LUX variant we cover (2 guides), plus flush and maximu
- 5x120bolt pattern (PCD)
- 74.1 mmcenter bore
- 2 guidesmodel years 2020
VinFast LUX wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2020 | VinFast LUX A2.0 Sedan | 5x120 | 74.1 mm | — |
| 2020 | VinFast LUX SA2.0 SUV | 5x120 | 74.1 mm | — |
Forged wheels for the VinFast LUX (5x120)
Get a quote for VinFast LUX wheels
Vehicles With the Same Hub as the VinFast LUX (5x120, 74.1 mm Bore)
In our database, 31 other vehicle entries from 2 makes use exactly the same 5x120 bolt pattern and 74.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x120 is used by 10.3% of the vehicle entries in our database (670 of 6,503); 5.2% of those also use a 74.1 mm center bore.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 18x8J | ET30 | 5.68 in (144 mm) | — | — |
| Maximum | 20x8.5J | ET25 | 5.73 in (146 mm) | +1 mm | +11 mm |
Hub-Centric Rings for a 74.1 mm Center Bore
A wheel with a center bore larger than 74.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 76.1 mm | 76.1 → 74.1 mm |
| 78.1 mm | 78.1 → 74.1 mm |
| 84.1 mm | 84.1 → 74.1 mm |
| 93.1 mm | 93.1 → 74.1 mm |
ANKUSI forged wheels are bored to exactly 74.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a VinFast LUX?
The VinFast LUX uses a 5x120 bolt pattern with a 74.1mm center bore across every LUX variant in our database (2 guides, 2020).
What is the VinFast LUX center bore?
The hub-centric center bore is 74.1 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all VinFast LUX years share the same wheel fitment?
The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.
Which forged wheels fit the VinFast LUX?
Any wheel drilled 5x120 with a 74.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.