Hyundai Equus Bolt Pattern, Center Bore & Wheel Offset (2010–2014)
Hyundai Equus wheel fitment: 5x114.3 bolt pattern, 67.1mm center bore (2010–2014). OE wheel sizes and offsets for every Equus variant we cover (2 guides), plu
- 5x114.3bolt pattern (PCD)
- 67.1 mmcenter bore
- M12x1.5 Nutwheel bolt / nut
- 2 guidesmodel years 2010–2014
Hyundai Equus wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2014 | Hyundai Equus | 5x114.3 | 67.1 mm | — |
| 2010 | Hyundai Equus Limousine | 5x114.3 | 67.1 mm | — |
Forged wheels for the Hyundai Equus (5x114.3)
Shop all Hyundai Equus forged wheels →
Get a quote for Hyundai Equus wheels
Vehicles With the Same Hub as the Hyundai Equus (5x114.3, 67.1 mm Bore)
In our database, 373 other vehicle entries from 29 makes use exactly the same 5x114.3 bolt pattern and 67.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x114.3 is used by 20.0% of the vehicle entries in our database (1,303 of 6,503); 35.1% of those also use a 67.1 mm center bore.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 19x8J | ET31 | 5.72 in (145 mm) | — | — |
| Flush | 20x9J | ET25 | 5.98 in (152 mm) | +7 mm | +19 mm |
| Maximum | 21x9.5J | ET20 | 6.04 in (153 mm) | +8 mm | +30 mm |
Hub-Centric Rings for a 67.1 mm Center Bore
A wheel with a center bore larger than 67.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 70.1 mm | 70.1 → 67.1 mm |
| 70.5 mm | 70.5 → 67.1 mm |
| 71.6 mm | 71.6 → 67.1 mm |
| 72.6 mm | 72.6 → 67.1 mm |
| 73.1 mm | 73.1 → 67.1 mm |
ANKUSI forged wheels are bored to exactly 67.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Hyundai Equus?
The Hyundai Equus uses a 5x114.3 bolt pattern with a 67.1mm center bore across every Equus variant in our database (2 guides, 2010–2014).
What is the Hyundai Equus center bore?
The hub-centric center bore is 67.1 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Hyundai Equus years share the same wheel fitment?
The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.
Which forged wheels fit the Hyundai Equus?
Any wheel drilled 5x114.3 with a 67.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.