Infiniti FX Bolt Pattern, Center Bore & Wheel Offset (2010–2012)
Infiniti FX wheel fitment: 5x114.3 bolt pattern, 66.1mm center bore (2010–2012). OE wheel sizes and offsets for every FX variant we cover (2 guides), plus flu
- 5x114.3bolt pattern (PCD)
- 66.1 mmcenter bore
- M12x1.25 Nutwheel bolt / nut
- 2 guidesmodel years 2010–2012
Infiniti FX wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2012 | Infiniti FX | 5x114.3 | 66.1 mm | 20x8J ET50 |
| 2010 | Infiniti FX Limited Edition | 5x114.3 | 66.1 mm | 21x9.5J ET50 |
Factory wheel sizes on the Infiniti FX
Across the 2 Infiniti FX trims with a documented factory wheel, the OE diameter is 20-21 inch, width 8-9.5J and offset ET50. A forged wheel that keeps the 5x114.3 bolt pattern and the 66.1 mm hub bore and stays inside that offset range bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Forged wheels for the Infiniti FX (5x114.3)
Shop all Infiniti FX forged wheels →
Get a quote for Infiniti FX wheels
Vehicles With the Same Hub as the Infiniti FX (5x114.3, 66.1 mm Bore)
In our database, 178 other vehicle entries from 8 makes use exactly the same 5x114.3 bolt pattern and 66.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x114.3 is used by 20.0% of the vehicle pages in our English fitment guide (1,300 of 6,503); 17.3% of those also use a 66.1 mm center bore.
Hub-Centric Rings for a 66.1 mm Center Bore
A wheel with a center bore larger than 66.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 66.6 mm | 66.6 → 66.1 mm |
| 67.1 mm | 67.1 → 66.1 mm |
| 70.1 mm | 70.1 → 66.1 mm |
| 70.5 mm | 70.5 → 66.1 mm |
| 73.1 mm | 73.1 → 66.1 mm |
ANKUSI forged wheels are bored to exactly 66.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Infiniti FX?
The Infiniti FX uses a 5x114.3 bolt pattern with a 66.1mm center bore across every FX variant in our database (2 guides, 2010–2012).
What is the Infiniti FX center bore?
The hub-centric center bore is 66.1 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Infiniti FX years share the same wheel fitment?
The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.
Which forged wheels fit the Infiniti FX?
Any wheel drilled 5x114.3 with a 66.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.