Jeep Compass Bolt Pattern, Center Bore & Wheel Offset (2007–2026)
Jeep Compass wheel fitment: 5x110 bolt pattern, 65.1mm center bore (2021–2026); 5x114.3 bolt pattern, 67.1mm center bore (2007–2014). OE wheel sizes and offse
- 5x110bolt pattern (PCD), most common
- 65.1 mmcenter bore
- M12x1.5 Nutwheel bolt / nut
- 5 guidesmodel years 2007–2026
Bolt pattern by generation
- 5x110, 65.1 mm center bore — 2021–2026 (3 variants)
- 5x114.3, 67.1 mm center bore — 2007–2014 (2 variants)
Jeep Compass wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2026 | Jeep Compass | 5x110 | 65.1 mm | 18x7J ET40 |
| 2021 | Jeep Compass 4xe | 5x110 | 65.1 mm | 18x7J ET40 |
| 2021 | Jeep Compass 80th Anniversary | 5x110 | 65.1 mm | 19x7.5J ET40 |
| 2014 | Jeep Compass | 5x114.3 | 67.1 mm | 18x7J ET39 |
| 2007 | Jeep Compass | 5x114.3 | 67.1 mm | 17x6.5J ET39 |
Factory wheel sizes on the Jeep Compass
Across the 5 Jeep Compass trims with a documented factory wheel, the OE diameter is 17-19 inch, width 6.5-7.5J and offset ET39-40. A forged wheel that keeps the bolt pattern and hub bore of your generation (see the table above) and stays inside that offset range bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Vehicles With the Same Hub as the Jeep Compass (5x110, 65.1 mm Bore)
In our database, 134 other vehicle entries from 18 makes use exactly the same 5x110 bolt pattern and 65.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x110 is used by 2.2% of the vehicle pages in our English fitment guide (145 of 6,503); 96.6% of those also use a 65.1 mm center bore.
Hub-Centric Rings for a 65.1 mm Center Bore
A wheel with a center bore larger than 65.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 66.1 mm | 66.1 → 65.1 mm |
| 66.6 mm | 66.6 → 65.1 mm |
| 67.1 mm | 67.1 → 65.1 mm |
| 70.1 mm | 70.1 → 65.1 mm |
| 73.1 mm | 73.1 → 65.1 mm |
ANKUSI forged wheels are bored to exactly 65.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Jeep Compass?
The Jeep Compass uses a 5x110 bolt pattern on most variants we cover with a 65.1mm center bore. Other generations use 5x114.3 / 67.1mm (2007–2014). Always check the exact year and trim before ordering.
What is the Jeep Compass center bore?
The hub-centric center bore is 65.1 mm on the most common generation; see the table for variants. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Jeep Compass years share the same wheel fitment?
No. The bolt pattern or center bore changed between generations, so wheels are not interchangeable across all years. Use the year-by-year table on this page to pick the right specification.
Which forged wheels fit the Jeep Compass?
Any wheel drilled 5x110 with a 65.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.