Audi S5 Bolt Pattern, Center Bore & Wheel Offset (2012–2025)
Audi S5 wheel fitment: 5x112 bolt pattern, 66.5mm center bore (2012–2025). OE wheel sizes and offsets for every S5 variant we cover (11 guides), plus flush an
- 5x112bolt pattern (PCD)
- 66.5 mmcenter bore
- M14x1.5 Boltwheel bolt / nut
- 11 guidesmodel years 2012–2025
Audi S5 wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2025 | Audi S5 Avant | 5x112 | 66.5 mm | 19x8.5J |
| 2025 | Audi S5 Avant [UK] | 5x112 | 66.5 mm | 19x8.5J |
| 2025 | Audi S5 Saloon [UK] | 5x112 | 66.5 mm | 19x8.5J |
| 2025 | Audi S5 Sedan | 5x112 | 66.5 mm | 19x8.5J |
| 2025 | S5 Sedan [US] | 5x112 | 66.5 mm | 19x8.5J ET35 |
| 2022 | Audi S5 Cabriolet [US] | 5x112 | 66.5 mm | 19x8.5J ET35 |
| 2020 | Audi S5 Sportback / Coupe / Cabriolet | 5x112 | 66.5 mm | 19x8.5J ET35 |
| 2017 | Audi S5 Cabriolet | 5x112 | 66.5 mm | 19x8.5J ET35 |
| 2017 | Audi S5 Coupe | 5x112 | 66.5 mm | 19x8.5J ET35 |
| 2017 | Audi S5 Sportback | 5x112 | 66.5 mm | 19x8.5J ET35 |
| 2012 | Audi S5 | 5x112 | 66.5 mm | 19x8.5J ET35 |
Factory wheel sizes on the Audi S5
Across the 11 Audi S5 trims with a documented factory wheel, the OE diameter is 19 inch, width 8.5J and offset ET35. A forged wheel that keeps the 5x112 bolt pattern and the 66.5 mm hub bore and stays inside that offset range bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Forged wheels for the Audi S5 (5x112)
Shop all Audi S5 forged wheels →
Get a quote for Audi S5 wheels
Vehicles With the Same Hub as the Audi S5 (5x112, 66.5 mm Bore)
In our database, 23 other vehicle entries from 5 makes use exactly the same 5x112 bolt pattern and 66.5 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x112 is used by 21.6% of the vehicle entries in our database (1,407 of 6,503); 11.9% of those also use a 66.5 mm center bore.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 19x8.5J | ET35 | 6.13 in (156 mm) | — | — |
| Flush | 20x9J | ET25 | 5.98 in (152 mm) | −4 mm | +16 mm |
| Maximum | 20x9.5J | ET20 | 6.04 in (153 mm) | −2 mm | +28 mm |
Hub-Centric Rings for a 66.5 mm Center Bore
A wheel with a center bore larger than 66.5 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 66.6 mm | 66.6 → 66.5 mm |
| 67.1 mm | 67.1 → 66.5 mm |
| 70.1 mm | 70.1 → 66.5 mm |
| 70.5 mm | 70.5 → 66.5 mm |
| 73.1 mm | 73.1 → 66.5 mm |
ANKUSI forged wheels are bored to exactly 66.5 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Audi S5?
The Audi S5 uses a 5x112 bolt pattern with a 66.5mm center bore across every S5 variant in our database (11 guides, 2012–2025).
What is the Audi S5 center bore?
The hub-centric center bore is 66.5 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Audi S5 years share the same wheel fitment?
The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.
Which forged wheels fit the Audi S5?
Any wheel drilled 5x112 with a 66.5mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.