Fitting Acura ZDX Type S wheels? This page gives the 2024-2025 Acura ZDX Type S bolt pattern (6x132), centre bore, factory rim size and the offset range for aftermarket and forged Acura ZDX Type S rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2024-2025 Acura ZDX Type S uses a 6x132 bolt pattern with a 74.5 mm centre bore and M12x1.5 lug nuts. Factory wheels: 22x9.5J at ET40, front and rear (275/40R22).
Forged wheels for the 2024-2025 Acura ZDX Type S — drilled 6x132 with a 74.5 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in about 25 days.
Acura ZDX Type S (2024-2025): 6x132 bolt pattern, 74.5mm center bore. 22x9.5J F/R at ET40. Aftermarket sizes confirmed on request.
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Built to order by ANKUSI — IATF 16949 & ISO 9001 certified forged wheel manufacturer, TÜV/SFI/VIA compliant. See our factory & certifications →
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
SUVs carry more curb weight higher off the ground, so wheel strength and rotational mass both matter more than on a comparable sedan. Forging keeps the wheel light without giving up the load rating the factory suspension geometry was tuned around.
The Acura ZDX Type S runs a 6x132 bolt pattern with a 74.5mm center bore from the factory. We haven't yet verified real-world Flush or Maximum Aggressive offset data for this exact generation from owner communities, so ANKUSI forges to this confirmed OE specification today — or to a wider custom offset once you tell us your target tire size and stance, rather than publishing invented aftermarket numbers.
The 2024-2025 Acura ZDX Type S (Electric SUV) uses a 6x132 bolt pattern with a 74.5mm center bore. Factory wheels are 22x9.5J at ET40, front and rear (275/40R22).
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Acura ZDX Type S (2024-2025) we drill the 6x132 pattern and cut the centre bore to 74.5mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
We are still verifying real-world Flush and Maximum Aggressive reference fitments for this exact generation from owner communities, so we are not publishing offset ranges yet rather than guessing. Contact ANKUSI now with your target look and tire size and we will confirm a custom-offset forged wheel build for your Acura ZDX Type S directly.
Everything above is reference data. If you want wheels actually built to it, that is what ANKUSI does: we are a forged wheel factory in Guangzhou, China, IATF 16949 and ISO 9001 certified, forging on our own 10,000-ton press and producing over 120,000 wheels a year. Forging blank, CNC machining, finishing, coating and inspection all happen in the same building — nothing is subcontracted and nothing is relabelled from another manufacturer.
Every set is cut to order, so the 6x132 pattern and the 74.5mm centre bore are machined for this car specifically rather than shimmed with adaptor rings. Diameter, width, offset, concavity, monoblock or multi-piece construction and the finish are all yours to choose.
We do not hold 6x132 wheels on a shelf — they are forged to order, which is why any offset, width and bore combination on this page is buildable rather than limited to a stock list.
What bolt pattern (PCD) does the Acura ZDX Type S use?
The 2024-2025 Acura ZDX Type S uses a 6x132 bolt pattern.
What is the center bore size on the Acura ZDX Type S?
The center bore is 74.5mm. If an aftermarket wheel has a larger center bore, hub-centric rings are recommended.
What size are the factory wheels on the Acura ZDX Type S?
Factory wheels are 22x9.5J at ET40, front and rear (275/40R22).
Can I get a custom offset before your Flush/Max data is published?
Yes -- contact ANKUSI with your bolt pattern and target offset and we will confirm the correct forged wheel spec for your build now.
In our database, 13 other vehicle entries from 5 makes use exactly the same 6x132 bolt pattern and 74.5 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
6x132 is used by 0.2% of the vehicle pages in our English fitment guide (15 of 6,503); 93.3% of those also use a 74.5 mm center bore.
A wheel with a center bore larger than 74.5 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 76.1 mm | 76.1 → 74.5 mm |
| 78.1 mm | 78.1 → 74.5 mm |
| 84.1 mm | 84.1 → 74.5 mm |
| 93.1 mm | 93.1 → 74.5 mm |
ANKUSI forged wheels are bored to exactly 74.5 mm for this vehicle, so no ring is needed.
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
Every design below is forged to order, so it can be machined to the Acura ZDX Type S's 6x132 bolt pattern and 74.5 mm center bore, with the width and offset calculated for your setup.
Forged wheels for the Ford F-150 featuring the paceling bright silver design, forged to order at ANKUSI's Guangzhou plant. Bolt pattern, centre bore, diameter, width and offset are machined for your exact vehicle — this listing covers 6-lug applications.
Matte Black Machined Directional · 6-Lug
Matte Black Round-Hole Deep Lip
Forged wheels for the Toyota 4Runner featuring the BROX silver 15-spoke design, forged to order at ANKUSI's Guangzhou plant. Bolt pattern, centre bore, diameter, width and offset are machined for your exact vehicle — this listing covers 6-lug applications.
Toyota 4Runner / Toyota Tacoma Fitment · 6-Lug
Toyota Tacoma / Toyota 4Runner Fitment · 6-Lug
Matte Black 6 Y-Spoke
Chevrolet Silverado 1500 / F-150 Fitment · 6-Lug
Bolt pattern and center bore on this page were cross-checked against at least two independent sources before publication. Last reviewed 2026-09-18. Spotted an error? Email info@ankusi.com and we will verify and correct it.