Lincoln OEM-Style Gloss Black Mesh Off-Road Forged Wheels
Lincoln Navigator / Mark LT Fitment · 6-Lug
2007-2014 Lincoln Navigator Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Lincoln Navigator wheels? This page gives the 2007-2014 Lincoln Navigator bolt pattern (6x135), centre bore, factory rim size and the offset range for aftermarket and forged Lincoln Navigator rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2007-2014 Lincoln Navigator uses a 6x135 bolt pattern with a 87.1 mm centre bore and M14x2 lug nuts. Factory wheels: 18x8.0J at ET44, front and rear.
Forged wheels for the 2007-2014 Lincoln Navigator — drilled 6x135 with a 87.1 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in about 25 days.
Get a quote for this car
Lincoln Navigator (2007-2014): 6x135 bolt pattern, 87.1mm center bore. Factory wheels: 18x8.0J F/R at ET44. Aftermarket sizes confirmed on request.
Bolt Pattern6x135
Wheel Bolt/NutM14x2 Nut
Center Bore87.1mm
Wheel Load Rating900–1250 kg/wheel (SUV segment reference)
Year2007-2014
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Built to order by ANKUSI — IATF 16949 & ISO 9001 certified forged wheel manufacturer, TÜV/SFI/VIA compliant. See our factory & certifications →
Forged wheels for the Lincoln NavigatorMachined to the 6x135 bolt pattern and 87.1 mm bore · 14–24 inch · offset calculated for your car · 3D drawing before production
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
SUVs carry more curb weight higher off the ground, so wheel strength and rotational mass both matter more than on a comparable sedan. Forging keeps the wheel light without giving up the load rating the factory suspension geometry was tuned around.
The Lincoln Navigator runs a 6x135 bolt pattern with a 87.1mm center bore from the factory. We haven't yet verified real-world Flush or Maximum Aggressive offset data for this exact generation from owner communities, so ANKUSI forges to this confirmed OE specification today — or to a wider custom offset once you tell us your target tire size and stance, rather than publishing invented aftermarket numbers.
Lincoln Navigator OE Wheel Specs
The 2007-2014 Lincoln Navigator (Luxury SUV) uses a 6x135 bolt pattern with a 87.1mm center bore. Factory wheels are 18x8.0J F/R at ET44.
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Lincoln Navigator (2007-2014) we drill the 6x135 pattern and cut the centre bore to 87.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Aftermarket Fitment: Confirmed on Request
We are still verifying real-world Flush and Maximum Aggressive reference fitments for this exact generation from owner communities, so we are not publishing offset ranges yet rather than guessing. Contact ANKUSI now with your target look and tire size and we will confirm a custom-offset forged wheel build for your Lincoln Navigator directly.
Custom Forged Wheels for the Lincoln Navigator (2007-2014)
Everything above is reference data. If you want wheels actually built to it, that is what ANKUSI does: we are a forged wheel factory in Guangzhou, China, IATF 16949 and ISO 9001 certified, forging on our own 10,000-ton press and producing over 120,000 wheels a year. Forging blank, CNC machining, finishing, coating and inspection all happen in the same building — nothing is subcontracted and nothing is relabelled from another manufacturer.
Every set is cut to order, so the 6x135 pattern and the 87.1mm centre bore are machined for this car specifically rather than shimmed with adaptor rings. Diameter, width, offset, concavity, monoblock or multi-piece construction and the finish are all yours to choose.
We do not hold 6x135 wheels on a shelf — they are forged to order, which is why any offset, width and bore combination on this page is buildable rather than limited to a stock list.
Frequently Asked Questions
What bolt pattern (PCD) does the Lincoln Navigator use?
The 2007-2014 Lincoln Navigator uses a 6x135 bolt pattern.
What is the center bore size on the Lincoln Navigator?
The center bore is 87.1mm. If an aftermarket wheel has a larger center bore, hub-centric rings are recommended.
What size are the factory wheels on the Lincoln Navigator?
Factory wheels are 18x8.0J F/R at ET44.
Can I get a custom offset before your Flush/Max data is published?
Yes -- contact ANKUSI with your bolt pattern and target offset and we will confirm the correct forged wheel spec for your build now.
Vehicles With the Same Hub as the Lincoln Navigator (6x135, 87.1 mm Bore)
In our database, 31 other vehicle entries from 3 makes use exactly the same 6x135 bolt pattern and 87.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
6x135 is used by 0.5% of the vehicle pages in our English fitment guide (34 of 6,503); 100.0% of those also use a 87.1 mm center bore.
Lincoln Navigator: Specs by Model Year
Hub-Centric Rings for a 87.1 mm Center Bore
A wheel with a center bore larger than 87.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 93.1 mm | 93.1 → 87.1 mm |
| 100.1 mm | 100.1 → 87.1 mm |
| 106.1 mm | 106.1 → 87.1 mm |
| 108.1 mm | 108.1 → 87.1 mm |
ANKUSI forged wheels are bored to exactly 87.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 18x8 wheels · 18 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
Forged Wheel Designs for the Lincoln Navigator
Every design below is forged to order, so it can be machined to the Lincoln Navigator's 6x135 bolt pattern and 87.1 mm center bore, with the width and offset calculated for your setup.
Ford F-150 / Chevrolet Silverado Off-Road 6-Lug Forged Wheels
Metallic Gray 6 V-Spoke Exposed Bolt Detail
Chevrolet Silverado 1500 / F-150 Off-Road Forged Wheels
Polished / Black Mesh Beadlock · 6-Lug
Ford F-150 / Chevrolet Silverado Off-Road Forged Wheels
Gunmetal 10-Spoke Beadlock · 6-Lug
Vossen-Style Gloss Black Web-Mesh Off-Road Forged Wheels
Ford F-150 / Ram 1500 Fitment · 6-Lug
TRO Offroad-Style Matte Gunmetal 6 Split-Spoke Off-Road Forged Wheels
Ford F-150 / Silverado 1500 Fitment · 6-Lug
KMC-Style Black / Machined Hex-Window Off-Road Forged Wheels
Ford F-150 / Chevrolet Silverado Fitment · 6-Lug
Belak-Style Gloss Black / Machined 5 Split-Spoke Beadlock Off-Road Forged Truck Racing Wheels
Ford F-150 / Silverado Fitment · 6-Lug
Bolt pattern and center bore on this page were cross-checked against at least two independent sources before publication. Last reviewed 2026-09-18. Spotted an error? Email info@ankusi.com and we will verify and correct it.