Vossen-Style Brushed Silver 5 Y-Spoke Forged Wheels
Monoblock · Brushed Silver
2006-2009 Honda Legend Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Honda Legend wheels? This page gives the 2006-2009 Honda Legend bolt pattern (5x120), centre bore, factory rim size and the offset range for aftermarket and forged Honda Legend rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2006-2009 Honda Legend uses a 5x120 bolt pattern with a 64.1 mm centre bore and M12x1.5 lug nuts. Factory wheels: 17x8.0J ET55, front and rear. For aftermarket wheels, 18x8.0J ET40 sits flush and 19x8.0J ET40 is the most aggressive fit.
Forged wheels for the 2006-2009 Honda Legend — drilled 5x120 with a 64.1 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Honda Legend (2006-2009): 5x120 bolt pattern, 64.1mm center bore. Factory wheels: 17x8.0J at ET55 offset, front and rear. Reference fitment ranges.
Bolt Pattern5x120
Wheel Bolt/NutM12x1.5 Nut
Center Bore64.1mm
Wheel Load Rating650–750 kg/wheel (Standard Passenger Car segment reference)
Year2006-2009
CategoryLuxury Sedan
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Built to order by ANKUSI — IATF 16949 & ISO 9001 certified forged wheel manufacturer, TÜV/SFI/VIA compliant. See our factory & certifications →
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 17x8.0J F/R |
| Flush Fitment | 18x8.0J at ET40 offset |
| Maximum Aggressive | 19x8.0J at ET40 offset |
Forged Wheel Designs for the Honda Legend
Every design below is forged to order, so it can be machined to the Honda Legend's 5x120 bolt pattern and 64.1 mm center bore, with the width and offset calculated for your setup.
Metallic Gray 5 W-Spoke Forged Wheels
Monoblock · Metallic Gray
BBS RI-D-Style Mirror Polished Silver 5 Y-Spoke Forged Wheels
Replica · Mirror Polished Silver
Honda Civic Type R Forged Wheels
Monoblock
Blue Custom Forged Wheels
Monoblock · Blue
Honda Civic Type R Forged Wheels
Monoblock
Rays-Style Mirror Polished 6-Spoke Black-Ring Beadlock Forged Wheels
Off-Road Beadlock · Mirror Polished / Black
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
A sedan's wheel spec is a balance point the factory tuned between ride comfort, steering feel, and everyday durability. Forging lets us hold that same structural margin while cutting rotational mass, which is where most of the real-world benefit — quicker steering response, marginally better ride — actually comes from.
The Honda Legend runs a 5x120 bolt pattern, 64.1mm center bore, and a 17x8.0J, front and rear, wheel from the factory. Our Flush Fitment reference is 18x8.0J ET40, which tucks the tire under the fender lip on a stock-height Honda Legend. Our Maximum Aggressive reference is 19x8.0J ET40 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
Honda Legend OE Wheel Specs
The 2006-2009 Honda Legend (Luxury Sedan) uses a 5x120 bolt pattern with a 64.1mm center bore. Factory wheels are 17x8.0J F/R.
Why the factory spec works for most owners:
- Balances ride comfort with everyday fuel efficiency
- A widely used size in this segment, so tire and wheel availability stays strong
- Keeps unsprung weight low for stable, predictable handling
- Maintains clearance for the factory brake calipers and suspension components
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Honda Legend (2006-2009) we drill the 5x120 pattern and cut the centre bore to 64.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Flush Fitment
For a flush look, F/R 18x8.0J ET40 is a commonly used starting point — clearance must be verified on a stock or mildly lowered Honda Legend.
Maximum Aggressive Fitment
F/R 19x8.0J ET40 is a more aggressive reference setup. Beyond this, expect rubbing under compression without fender rolling or camber correction.
A Note on Clearance
Final clearance depends on the exact tire model, suspension height, brake package, alignment and vehicle tolerances. A physical test fit is recommended before production.
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Honda spec, or want a wheel built to a custom offset for your Honda Legend? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 17x8J | ET55 | 6.67 in (169 mm) | — | — |
| Flush | 18x8J | ET40 | 6.07 in (154 mm) | −15 mm | +15 mm |
| Maximum | 19x8J | ET40 | 6.07 in (154 mm) | −15 mm | +15 mm |
Vehicles With the Same Hub as the Honda Legend (5x120, 64.1 mm Bore)
In our database, 28 other vehicle entries from 8 makes use exactly the same 5x120 bolt pattern and 64.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x120 is used by 10.3% of the vehicle pages in our English fitment guide (670 of 6,503); 4.3% of those also use a 64.1 mm center bore.
Hub-Centric Rings for a 64.1 mm Center Bore
A wheel with a center bore larger than 64.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 65.1 mm | 65.1 → 64.1 mm |
| 66.1 mm | 66.1 → 64.1 mm |
| 66.6 mm | 66.6 → 64.1 mm |
| 67.1 mm | 67.1 → 64.1 mm |
| 73.1 mm | 73.1 → 64.1 mm |
ANKUSI forged wheels are bored to exactly 64.1 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Honda Legend use?
The 2006-2009 Honda Legend uses a 5x120 bolt pattern.
How many lug bolts does the Honda Legend use?
The Honda Legend uses a 5-lug bolt pattern (5x120), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Honda Legend?
The Honda Legend's center bore is 64.1mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Honda Legend?
Factory wheels on the Honda Legend are 17x8.0J F/R.
What is the biggest wheel size I can fit on my Honda Legend without rubbing?
The most aggressive fitment we recommend without fender work is 19x8.0J at ET40 offset. Going beyond this typically causes rubbing under compression unless you roll the fenders or add camber correction.
What does a flush wheel fitment look like on the Honda Legend?
For a flush look with minimal to no rubbing, we recommend 18x8.0J at ET40 offset as a starting point on a stock or mildly lowered Honda Legend.
Do I need wheel spacers for my Honda Legend?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Honda Legend?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 6.07" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Honda Legend?
The Honda Legend runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.
Sources and Last Update
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 17x8 wheels · 17 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
Bolt pattern and center bore on this page were cross-checked against at least two independent sources before publication. Last reviewed 2026-09-18. Spotted an error? Email info@ankusi.com and we will verify and correct it.