
Buick OEM-Style Red 2-Piece Forged Wheels
Buick Regal / LaCrosse Fitment · 5-Lug
462 fitment guides for Buick, covering 1965 to 2026, spanning 4x100, 4x114.3, 5x100, 5x105, 5x115, 5x120, 5x120.65, 5x127, 6x114.3, 6x120, 6x127 and 6x132 bolt patterns. Browse the full list below, then open a model for bolt pattern, center bore, OE offset, flush and max wheel sizes, and offset/backspacing conversions.
Based on the 462 Buick fitment guides we cover, we have documented 13 distinct bolt pattern / center bore combinations across different Buick platforms and model years:
Do not mix platforms: a wheel forged for one Buick bolt pattern / center bore combination will not hub-center correctly on a different one, even if the diameter looks right. Always confirm your exact model and year against the bolt pattern and center bore listed on that model page below before ordering — or send us your VIN or trim level and we will confirm it for you.
Offset and backspacing recommendations vary by trim even within the same bolt pattern, mainly due to differences in brake caliper size and suspension geometry between base and performance trims. Every ANKUSI wheel is forged to your exact target offset, so send us your Buick model, year, and trim and we will confirm the correct spec before production — no guessing required.
The most common Buick fitment in our guide is 5x115 with a 70.3 mm center bore (227 of 462 model years we cover).
Changing width or offset? Check how far the wheel moves in or out with our offset & backspacing calculator.
Forged-to-order wheel designs matched to Buick bolt patterns. Every set is machined to your exact model, offset and center bore.

Buick Regal / LaCrosse Fitment · 5-Lug

Buick Enclave / GL8 Phev Fitment · 6-Lug

Buick Enclave / GL8 Phev Fitment · 6-Lug

Buick LaCrosse / Encore Fitment · 5-Lug

Buick Regal / LaCrosse Fitment · 5-Lug

Buick Regal / Envision Fitment · 5-Lug

Buick Regal / LaCrosse Fitment · 5-Lug

Buick Regal / LaCrosse Fitment · 5-Lug
In our database, 88 other vehicle entries from 8 makes use exactly the same 5x115 bolt pattern and 70.3 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x115 is used by 3.2% of the vehicle pages in our English fitment guide (209 of 6,503); 65.1% of those also use a 70.3 mm center bore.
A wheel with a center bore larger than 70.3 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 70.5 mm | 70.5 → 70.3 mm |
| 71.6 mm | 71.6 → 70.3 mm |
| 72.6 mm | 72.6 → 70.3 mm |
| 73.1 mm | 73.1 → 70.3 mm |
ANKUSI forged wheels are bored to exactly 70.3 mm for this vehicle, so no ring is needed.
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.