
Corvette OEM-Style Chrome Mesh Riveted 2-Piece Forged Wheels
2-Piece · Chrome
Fitting Chevrolet Cavalier wheels? This page gives the 1999 Chevrolet Cavalier bolt pattern (5x100), centre bore, factory rim size and the offset range for aftermarket and forged Chevrolet Cavalier rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Chevrolet Cavalier (1999): 5x100 bolt pattern, 57.1mm center bore. Factory wheels: 14x5.5J at ET42 offset, front and rear. Reference fitment ranges.
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 14x5.5J F/R |
| Flush Fitment | 17x7.5J at ET35 offset |
| Maximum Aggressive | 18x8.0J at ET32 offset |
Every design below is forged to order, so it can be machined to the Chevrolet Cavalier's 5x100 bolt pattern and 57.1 mm center bore, with the width and offset calculated for your setup.

2-Piece · Chrome

Monoblock · Matte Silver

Drag Racing · Gloss Black

Monoblock · Bright Silver

Deep Dish · Bright Silver

Monoblock · Polished


Deep Dish · Gold
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.


Coupes and performance platforms are where rotational mass shows up fastest — in acceleration, in braking, and in how quickly the chassis changes direction. Forging lets us build to the same strength spec as the factory wheel at a meaningfully lower rotational weight, which is where the performance gain actually comes from, not just the visual one.
The Chevrolet Cavalier runs a 5x100 bolt pattern, 57.1mm center bore, and a 14x5.5J, front and rear, wheel from the factory. Our Flush Fitment reference is 17x7.5J ET35, which tucks the tire under the fender lip on a stock-height Chevrolet Cavalier. Our Maximum Aggressive reference is 18x8.0J ET32 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
The 1999 Chevrolet Cavalier (Sedan/Coupe) uses a 5x100 bolt pattern with a 57.1mm center bore. Factory wheels are 14x5.5J F/R.
Why the factory spec works for most owners:
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Chevrolet Cavalier (1999) we drill the 5x100 pattern and cut the centre bore to 57.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
Final clearance depends on the exact tire model, suspension height, brake package, alignment and vehicle tolerances. A physical test fit is recommended before production.
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Chevrolet spec, or want a wheel built to a custom offset for your Chevrolet Cavalier? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.
Thread & Fastener: M12x1.5, conical-seat lug nut.
Factory Torque Spec: 136 Nm (100 ft-lb). Covers most Chevrolet passenger cars and crossovers on M12 studs.
TPMS: Vehicles built before the 2008 model year were not federally required to carry factory TPMS in the US, though many manufacturers adopted it earlier; verify whether your specific build has TPMS before ordering sensor-compatible wheels.
Tire Pressure: Always set tire pressure to the value on your vehicle's tire placard (driver's doorjamb or glovebox), not the max PSI printed on the tire sidewall — this is trim- and tire-size-specific and stays the same reference point when you switch to a different wheel and tire combination.
Reference data compiled from published OEM service specifications and cross-checked against independent repair sources; always confirm against your owner's manual or door-jamb placard before installation.