Hummer OEM-Style Gloss Black 20-Window Forged Wheels
Hummer H1 / H2 SUV Fitment · 8-Lug
Hummer Wheel Fitment Guide
13 fitment guides for Hummer, covering 2002 to 2009, spanning 6x139.7 and 8x165.1 bolt patterns. Browse the full list below, then open a model for bolt pattern, center bore, OE offset, flush and max wheel sizes, and offset/backspacing conversions.
Hummer Bolt Pattern & Center Bore Notes
Based on the 13 Hummer fitment guides we cover, we have documented 2 distinct bolt pattern / center bore combinations across different Hummer platforms and model years:
- 8x165.1 bolt pattern, 116.7mm center bore — 8 models we cover, spanning 2002–2008.
- 6x139.7 bolt pattern, 100.3mm center bore — 4 models we cover, spanning 2006–2009.
Do not mix platforms: a wheel forged for one Hummer bolt pattern / center bore combination will not hub-center correctly on a different one, even if the diameter looks right. Always confirm your exact model and year against the bolt pattern and center bore listed on that model page below before ordering — or send us your VIN or trim level and we will confirm it for you.
Offset and backspacing recommendations vary by trim even within the same bolt pattern, mainly due to differences in brake caliper size and suspension geometry between base and performance trims. Every ANKUSI wheel is forged to your exact target offset, so send us your Hummer model, year, and trim and we will confirm the correct spec before production — no guessing required.
How to check the bolt pattern on your Hummer
The most common Hummer fitment in our guide is 8x165.1 with a 116.7 mm center bore (8 of 13 model years we cover).
- Read the stamping on the back of an original wheel: size, offset (ET) and bolt pattern are usually cast into a spoke or the hub pad.
- No stamping? Measure center-to-center between two adjacent lug holes. For 8x165.1 that distance is 63.2 mm (PCD × sin(180° / 8)). A 2 mm difference already means a different bolt pattern.
- Match generation and year on the model pages below — the same nameplate can change bolt pattern or center bore between generations.
Changing width or offset? Check how far the wheel moves in or out with our offset & backspacing calculator.
8x165.1 / 116.7mm center bore
H2 (5)
6x139.7 / 100.3mm center bore
H3 (2)
More Hummer fitment guides
Forged Wheels for Hummer
Forged-to-order wheel designs matched to Hummer bolt patterns. Every set is machined to your exact model, offset and center bore.
Vehicles Using 8x165.1 With a 116.7 mm Center Bore
In our database, 11 other vehicle entries from 3 makes use exactly the same 8x165.1 bolt pattern and 116.7 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
8x165.1 is used by 0.4% of the vehicle pages in our English fitment guide (29 of 6,503); 65.5% of those also use a 116.7 mm center bore.
Hub-Centric Rings for a 116.7 mm Center Bore
A wheel with a center bore larger than 116.7 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 130.1 mm | 130.1 → 116.7 mm |
ANKUSI forged wheels are bored to exactly 116.7 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.