Land Rover Range Rover / Defender Forged Wheels
Gloss Silver Full-Face
2026 Tenet A8 Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Tenet A8 wheels? This page gives the 2026 Tenet A8 bolt pattern (5x108), centre bore, factory rim size and the offset range for aftermarket and forged Tenet A8 rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Tenet A8 (2026): 5x108 bolt pattern, 65.1mm center bore. Factory wheels: 18x7.5J F/R. Flush and max fitment confirmed on request.
Bolt Pattern5x108
Wheel Bolt/NutM12x1.5
Center Bore65.1mm
Wheel Load Rating650–750 kg/wheel (Standard Passenger Car segment reference)
Caliper TypeFactory caliper package (OEM)
Year2026
CategoryPerformance Sedan
Data check: the bolt pattern and center bore on this page have not yet been confirmed by a second independent source. Measure your hub or ask us before ordering. How we verify
Built to order by ANKUSI — IATF 16949 & ISO 9001 certified forged wheel manufacturer, TÜV/SFI/VIA compliant. See our factory & certifications →
Forged wheels for the Tenet A8Machined to the 5x108 bolt pattern and 65.1 mm bore · 14–24 inch · offset calculated for your car · 3D drawing before production
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
A big saloon lives or dies on ride quality, and the wheel is the first thing that ruins it. Going wider and lower without watching load rating and offset trades away exactly the composure you paid for. Forging lets you add diameter and width while keeping rotating mass close to the factory figure.
We publish the factory specification for the Tenet A8 below. We have not yet been able to verify aftermarket flush or maximum-aggressive offsets for this exact variant against a source we trust, so we are not listing any - an invented offset is worse than no offset when a wheel has to clear a caliper.
Tenet A8 OE Wheel Specs
The 2026 Tenet A8 (Performance Sedan) uses a 5x108 bolt pattern with a 65.1mm center bore. Factory wheels are 18x7.5J F/R.
Why the factory spec works for most owners:
- Keeps unsprung weight low to preserve the factory handling balance
- Matches the wider, performance-oriented tire sizing typical of this platform
- Maintains clearance for the factory brake package and suspension geometry
- Balances grip with ride comfort for daily and spirited driving
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Tenet A8 (2026) we drill the 5x108 pattern and cut the centre bore to 65.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 6,436 vehicles, free to download, CC BY 4.0.
Aftermarket Fitment Data: Verification in Progress
Published aftermarket fitment for this exact variant is still thin, so we have not committed to a flush or maximum-aggressive figure. Our engineering team is still collecting verified data for this variant. In the meantime the factory specification above is accurate and is the safe reference point for ordering.
Send us your car and current wheel size on WhatsApp and our engineers will confirm a flush and a maximum fitment for this exact vehicle, usually within one working day.
What we do know: This is a Russian-market sedan built on the Chery Arrizo 8. The factory 7.5Jx18 wheel runs ET47; 16-inch (6Jx16 ET45) and 17-inch (7Jx17 ET47) wheels are also fitted. Bolt pattern, centre bore and factory wheel sizes match between wheel-size.com and the Chery Arrizo 8 data on avtoreference.com.
Need a wheel for this car now? Contact ANKUSI with your target diameter, width and offset and our engineers will confirm the correct forged spec against your brake package before anything is cut. You can also use our Offset & Backspacing Calculator to work through the numbers yourself.
Custom Forged Wheels for the Tenet A8 (2026)
Everything above is reference data. If you want wheels actually built to it, that is what ANKUSI does: we are a forged wheel factory in Guangzhou, China, IATF 16949 and ISO 9001 certified, forging on our own 10,000-ton press and producing over 120,000 wheels a year. Forging blank, CNC machining, finishing, coating and inspection all happen in the same building — nothing is subcontracted and nothing is relabelled from another manufacturer.
Every set is cut to order, so the 5x108 pattern and the 65.1mm centre bore are machined for this car specifically rather than shimmed with adaptor rings. Diameter, width, offset, concavity, monoblock or multi-piece construction and the finish are all yours to choose.
Designs we already tool for the 5x108 pattern — each one is re-cut to your sizes and offsets:
Land Rover Range Rover / Defender Forged Wheels – Bright Silver 10-Spoke Machined Face
Land Rover Range Rover Sport SV Carbon Forged Wheels – High-Gloss Silver 6-Spoke (20-24in, 5×120)
ROTIFORM Gloss White Round-Hole Disc Forged Wheels – Volkswagen Golf GTI Edition 50 Fitment (18-21in, 5×112)
APEX VS-5RS-Style Brushed Silver 10-Spoke Y-Design Forged Wheels – BMW M3 CS Handschalter Fitment (19-21in, 5x112)Frequently Asked Questions
What bolt pattern (PCD) does the Tenet A8 use?
The 2026 Tenet A8 uses a 5x108 bolt pattern.
How many lug bolts does the Tenet A8 use?
The Tenet A8 uses a 5-lug bolt pattern (5x108), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Tenet A8?
The Tenet A8's center bore is 65.1mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Tenet A8?
Factory wheels on the Tenet A8 are 18x7.5J F/R.
Do I need wheel spacers for my Tenet A8?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Tenet A8?
The Tenet A8 runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.
Vehicles With the Same Hub as the Tenet A8 (5x108, 65.1 mm Bore)
In our database, 115 other vehicle entries from 14 makes use exactly the same 5x108 bolt pattern and 65.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x108 is used by 7.7% of the vehicle entries in our database (498 of 6,503); 23.3% of those also use a 65.1 mm center bore.
Hub-Centric Rings for a 65.1 mm Center Bore
A wheel with a center bore larger than 65.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 66.1 mm | 66.1 → 65.1 mm |
| 66.6 mm | 66.6 → 65.1 mm |
| 67.1 mm | 67.1 → 65.1 mm |
| 70.1 mm | 70.1 → 65.1 mm |
| 73.1 mm | 73.1 → 65.1 mm |
ANKUSI forged wheels are bored to exactly 65.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
Forged Wheel Designs for the Tenet A8
Every design below is forged to order, so it can be machined to the Tenet A8's 5x108 bolt pattern and 65.1 mm center bore, with the width and offset calculated for your setup.
Lynk & Co OEM-Style Gloss Black Twisted 5 Split-Spoke Forged Wheels
Lynk & Co 01 Fitment · 5-Lug
BMW 5 Series / 3 Series Forged Wheels
Bronze / Silver / Transparent Rose Gold 2-Piece 10 Y-Spoke
BMW 5 Series / 3 Series Forged Wheels
Polished Transparent Frozen Gold 5-Spoke
Land Rover Range Rover / Defender Off-Road 5-Lug Forged Wheels
Matte Black Round-Hole Full-Face
Forgiato Transparent Gray Custom Forged Wheels - Lamborghini Urus / Land Rover Range Rover Fitment (5-Lug)
Forgiato-Style forged wheels featuring the transparent gray custom design, forged to order at ANKUSI's Guangzhou plant. Bolt pattern, centre bore, diameter, width and offset are machined for your exact vehicle — this listing covers 5-lug applications.
Geely Xingrui L Plus Forged Wheels
Machined Face 5-Spoke Y-Design · 18-20in, 5x114.3
Land Rover Range Rover / Defender Forged Wheels
Gloss Black 7 Y-Spoke
Bolt pattern and center bore on this page were cross-checked against at least two independent sources before publication. Last reviewed 2026-10-13. Spotted an error? Email info@ankusi.com and we will verify and correct it.