Custom Forged Wheels for the Mitsubishi Montero (6x139.7)
ANKUSI forges custom wheels for the Mitsubishi Montero, drilled 6x139.7 with a 67.1 mm hub-centric bore, so no hub rings or adapters are needed. The factory wheel size in our database is 16x7J ET46 (model year 2005).
Recommended wheel sizes for the Mitsubishi Montero
| Type | Size | Offset |
|---|---|---|
| Factory (OE) | 16x7J | ET46 |
| Flush | 18x8J | ET30 |
| Max | 20x9J | ET20 |
Flush and max sizes are recommendations from our fitment database; check real clearance on your car before ordering. See bolt pattern and center bore by year for the Mitsubishi Montero
Forged wheels that can be drilled for the Mitsubishi Montero
Get a quote for Mitsubishi Montero wheels
Vehicles With the Same Hub as the Mitsubishi Montero (6x139.7, 67.1 mm Bore)
In our database, 1 other Fiat entries use exactly the same 6x139.7 bolt pattern and 67.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
6x139.7 is used by 4.0% of the vehicle entries in our database (258 of 6,503); 3.5% of those also use a 67.1 mm center bore.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 16x7J | ET46 | 5.81 in (148 mm) | — | — |
| Flush | 18x8J | ET30 | 5.68 in (144 mm) | −3 mm | +29 mm |
| Maximum | 20x9J | ET20 | 5.79 in (147 mm) | −1 mm | +51 mm |
Hub-Centric Rings for a 67.1 mm Center Bore
A wheel with a center bore larger than 67.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 70.1 mm | 70.1 → 67.1 mm |
| 70.5 mm | 70.5 → 67.1 mm |
| 71.6 mm | 71.6 → 67.1 mm |
| 72.6 mm | 72.6 → 67.1 mm |
| 73.1 mm | 73.1 → 67.1 mm |
ANKUSI forged wheels are bored to exactly 67.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
How to order
- Send your model, year and the size you want on WhatsApp.
- Our team confirms bolt pattern, center bore and offset for your car.
- The set is forged and machined to order in about 25 days, then shipped.
FAQ
How long do custom forged wheels for the Mitsubishi Montero take?
About 25 days of production after the specs are confirmed. Every wheel is drilled 6x139.7 with a 67.1 mm center bore.
What is the factory wheel size of the Mitsubishi Montero?
The factory size in our database is 16x7J ET46. It can vary by trim, so check your exact car before ordering.
What wheel size fits the Mitsubishi Montero flush?
We recommend 18x8J ET30 for a flush fit and 20x9J ET20 as the maximum. Check clearance before ordering.