Mitsubishi Montero Bolt Pattern, Center Bore & Wheel Offset (2004–2005)
Mitsubishi Montero wheel fitment: 6x139.7 bolt pattern, 67.1mm center bore (2004–2005). OE wheel sizes and offsets for every Montero variant we cover (2 guide
- 6x139.7bolt pattern (PCD)
- 67.1 mmcenter bore
- M12x1.5 Nutwheel bolt / nut
- 2 guidesmodel years 2004–2005
Mitsubishi Montero wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2005 | Mitsubishi Montero | 6x139.7 | 67.1 mm | 16x7J ET46 |
| 2004 | Mitsubishi Montero Sport | 6x139.7 | 67.1 mm | 16x7J ET22 |
Factory wheel sizes on the Mitsubishi Montero
Across the 2 Mitsubishi Montero trims with a documented factory wheel, the OE diameter is 16 inch, width 7J and offset ET22-46. A forged wheel that keeps the 6x139.7 bolt pattern and the 67.1 mm hub bore and stays inside that offset range bolts on without spacers or hub rings. The offset spread between trims is 24 mm, so read the year-by-year row for your exact car before choosing a width. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Forged wheels for the Mitsubishi Montero (6x139.7)
Shop all Mitsubishi Montero forged wheels →
Get a quote for Mitsubishi Montero wheels
Vehicles With the Same Hub as the Mitsubishi Montero (6x139.7, 67.1 mm Bore)
In our database, 1 other Fiat entries use exactly the same 6x139.7 bolt pattern and 67.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
6x139.7 is used by 3.8% of the vehicle entries in our database (244 of 6,396); 4.1% of those also use a 67.1 mm center bore.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 16x7J | ET46 | 5.81 in (148 mm) | — | — |
| Flush | 18x8J | ET30 | 5.68 in (144 mm) | −3 mm | +29 mm |
| Maximum | 20x9J | ET20 | 5.79 in (147 mm) | −1 mm | +51 mm |
Hub-Centric Rings for a 67.1 mm Center Bore
A wheel with a center bore larger than 67.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 70.1 mm | 70.1 → 67.1 mm |
| 70.5 mm | 70.5 → 67.1 mm |
| 71.6 mm | 71.6 → 67.1 mm |
| 72.6 mm | 72.6 → 67.1 mm |
| 73.1 mm | 73.1 → 67.1 mm |
ANKUSI forged wheels are bored to exactly 67.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Mitsubishi Montero?
The Mitsubishi Montero uses a 6x139.7 bolt pattern with a 67.1mm center bore across every Montero variant in our database (2 guides, 2004–2005).
What is the Mitsubishi Montero center bore?
The hub-centric center bore is 67.1 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Mitsubishi Montero years share the same wheel fitment?
The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.
Which forged wheels fit the Mitsubishi Montero?
Any wheel drilled 6x139.7 with a 67.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.