Custom Forged Wheels for the HSV Gen-F Maloo (5x120)
ANKUSI forges custom wheels for the HSV Gen-F Maloo, drilled 5x120 with a 66.9 mm hub-centric bore, so no hub rings or adapters are needed. The factory wheel size in our database is 20x8.5J ET36 (model year 2014).
Recommended wheel sizes for the HSV Gen-F Maloo
| Type | Size | Offset |
|---|---|---|
| Factory (OE) | 20x8.5J | ET36 |
| Flush | 20x9J | ET28 |
| Max | 20x9.5J | ET25 |
Flush and max sizes are recommendations from our fitment database; check real clearance on your car before ordering. See bolt pattern and center bore by year for the HSV Gen-F Maloo
Forged wheels that can be drilled for the HSV Gen-F Maloo
Audi A6 / BMW 5 Series Forged Wheels – Gloss Black Split Directional Machined Face
BMW 5 Series / 3 Series Forged Wheels – Matte Black / Gunmetal 10 Y-Spoke
Corvette OEM-Style Matte Silver Custom Forged Wheels – Chevrolet Corvette C8 / Camaro 5th Gen Fitment (5-Lug)
APEX SM-10-Style Metallic Gray 10-Spoke Forged Wheels - BMW 3 Series E90 / BMW 3 Series F30 Fitment (5-Lug)
Porsche 911 / BMW M3 Forged Wheels – Gloss Black Rotary 5-Spoke (5-Lug)
Work-Style 2-Piece Gunmetal 10-Spoke Bronze Lip Forged Wheels – Lexus LS / Audi A8 Fitment (5-Lug)
BMW M3 / M5 Forged Wheels – Gloss Black Directional Milled
Bradley-Style Gunmetal 5-Spoke Off-Road Forged Wheels – Jeep Wrangler / Land Cruiser Fitment (5-Lug)Get a quote for HSV Gen-F Maloo wheels
Vehicles With the Same Hub as the HSV Gen-F Maloo (5x120, 66.9 mm Bore)
In our database, 131 other vehicle entries from 9 makes use exactly the same 5x120 bolt pattern and 66.9 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x120 is used by 10.2% of the vehicle entries in our database (666 of 6,503); 24.2% of those also use a 66.9 mm center bore.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 20x8.5J | ET36 | 6.17 in (157 mm) | — | — |
| Flush | 20x9J | ET28 | 6.10 in (155 mm) | −2 mm | +14 mm |
| Maximum | 20x9.5J | ET25 | 6.23 in (158 mm) | +2 mm | +24 mm |
Hub-Centric Rings for a 66.9 mm Center Bore
A wheel with a center bore larger than 66.9 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 67.1 mm | 67.1 → 66.9 mm |
| 70.1 mm | 70.1 → 66.9 mm |
| 70.5 mm | 70.5 → 66.9 mm |
| 71.6 mm | 71.6 → 66.9 mm |
| 73.1 mm | 73.1 → 66.9 mm |
ANKUSI forged wheels are bored to exactly 66.9 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
How to order
- Send your model, year and the size you want on WhatsApp.
- Our team confirms bolt pattern, center bore and offset for your car.
- The set is forged and machined to order in about 25 days, then shipped.
FAQ
How long do custom forged wheels for the HSV Gen-F Maloo take?
About 25 days of production after the specs are confirmed. Every wheel is drilled 5x120 with a 66.9 mm center bore.
What is the factory wheel size of the HSV Gen-F Maloo?
The factory size in our database is 20x8.5J ET36. It can vary by trim, so check your exact car before ordering.
What wheel size fits the HSV Gen-F Maloo flush?
We recommend 20x9J ET28 for a flush fit and 20x9.5J ET25 as the maximum. Check clearance before ordering.