Subaru Levorg Bolt Pattern, Center Bore & Wheel Offset (2014–2025)
Subaru Levorg wheel fitment: 5x114.3 bolt pattern, 56.1mm center bore (2014–2025). OE wheel sizes and offsets for every Levorg variant we cover (5 guides), pl
- 5x114.3bolt pattern (PCD)
- 56.1 mmcenter bore
- Nutwheel bolt / nut
- 5 guidesmodel years 2014–2025
Subaru Levorg wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2025 | Subaru Levorg | 5x114.3 | 56.1 mm | 17x7J |
| 2022 | Subaru Levorg | 5x114.3 | 56.1 mm | 18x7J |
| 2020 | Subaru Levorg | 5x114.3 | 56.1 mm | 17x7J |
| 2017 | Subaru Levorg | 5x114.3 | 56.1 mm | 18x7J |
| 2014 | Subaru Levorg | 5x114.3 | 56.1 mm | 17x7J |
Factory wheel sizes on the Subaru Levorg
Across the 5 Subaru Levorg trims with a documented factory wheel, the OE diameter is 17-18 inch, width 7J. A forged wheel that keeps the 5x114.3 bolt pattern and the 56.1 mm hub bore and matches the factory offset listed on the model page bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Forged wheels for the Subaru Levorg (5x114.3)
Get a quote for Subaru Levorg wheels
Vehicles With the Same Hub as the Subaru Levorg (5x114.3, 56.1 mm Bore)
No other make in our database pairs 5x114.3 with a 56.1 mm center bore, so wheels taken from other brands need a hub-centric ring or a custom bore.
5x114.3 is used by 20.1% of the vehicle entries in our database (1,284 of 6,396); 1.6% of those also use a 56.1 mm center bore.
Hub-Centric Rings for a 56.1 mm Center Bore
A wheel with a center bore larger than 56.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 57.1 mm | 57.1 → 56.1 mm |
| 60.1 mm | 60.1 → 56.1 mm |
| 63.4 mm | 63.4 → 56.1 mm |
| 64.1 mm | 64.1 → 56.1 mm |
| 73.1 mm | 73.1 → 56.1 mm |
ANKUSI forged wheels are bored to exactly 56.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Subaru Levorg?
The Subaru Levorg uses a 5x114.3 bolt pattern with a 56.1mm center bore across every Levorg variant in our database (5 guides, 2014–2025).
What is the Subaru Levorg center bore?
The hub-centric center bore is 56.1 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Subaru Levorg years share the same wheel fitment?
The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.
Which forged wheels fit the Subaru Levorg?
Any wheel drilled 5x114.3 with a 56.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.