Skoda Yeti Bolt Pattern, Center Bore & Wheel Offset (2011–2014)
Skoda Yeti wheel fitment: 5x112 bolt pattern, 57.1mm center bore (2011–2014). OE wheel sizes and offsets for every Yeti variant we cover (2 guides), plus flus
- 5x112bolt pattern (PCD)
- 57.1 mmcenter bore
- M14x1.5 Boltwheel bolt / nut
- 2 guidesmodel years 2011–2014
Skoda Yeti wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2014 | Skoda Yeti | 5x112 | 57.1 mm | 17x7J ET45 |
| 2011 | Skoda Yeti 4x4 | 5x112 | 57.1 mm | 17x7J ET60 |
Factory wheel sizes on the Skoda Yeti
Across the 2 Skoda Yeti trims with a documented factory wheel, the OE diameter is 17 inch, width 7J and offset ET45-60. A forged wheel that keeps the 5x112 bolt pattern and the 57.1 mm hub bore and stays inside that offset range bolts on without spacers or hub rings. The offset spread between trims is 15 mm, so read the year-by-year row for your exact car before choosing a width. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Forged wheels for the Skoda Yeti (5x112)
Shop all Skoda Yeti forged wheels →
Get a quote for Skoda Yeti wheels
Vehicles With the Same Hub as the Skoda Yeti (5x112, 57.1 mm Bore)
In our database, 358 other vehicle entries from 17 makes use exactly the same 5x112 bolt pattern and 57.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x112 is used by 21.6% of the vehicle entries in our database (1,407 of 6,503); 29.0% of those also use a 57.1 mm center bore.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 17x7J | ET45 | 5.77 in (147 mm) | — | — |
| Flush | 18x8J | ET35 | 5.88 in (149 mm) | +3 mm | +23 mm |
| Maximum | 19x8.5J | ET30 | 5.93 in (151 mm) | +4 mm | +34 mm |
Hub-Centric Rings for a 57.1 mm Center Bore
A wheel with a center bore larger than 57.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 60.1 mm | 60.1 → 57.1 mm |
| 63.4 mm | 63.4 → 57.1 mm |
| 64.1 mm | 64.1 → 57.1 mm |
| 65.1 mm | 65.1 → 57.1 mm |
| 73.1 mm | 73.1 → 57.1 mm |
ANKUSI forged wheels are bored to exactly 57.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Skoda Yeti?
The Skoda Yeti uses a 5x112 bolt pattern with a 57.1mm center bore across every Yeti variant in our database (2 guides, 2011–2014).
What is the Skoda Yeti center bore?
The hub-centric center bore is 57.1 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Skoda Yeti years share the same wheel fitment?
The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.
Which forged wheels fit the Skoda Yeti?
Any wheel drilled 5x112 with a 57.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.