Panoz Esperante Bolt Pattern, Center Bore & Wheel Offset (2015)
Panoz Esperante wheel fitment: 5x114.3 bolt pattern, 70.5mm center bore. OE wheel sizes and offsets for every Esperante variant we cover (2 guides), plus flus
- 5x114.3bolt pattern (PCD)
- 70.5 mmcenter bore
- 2 guidesmodel years 2015
Panoz Esperante wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2015 | Panoz Esperante Spyder | 5x114.3 | 70.5 mm | — |
| 2015 | Panoz Esperante Spyder GT | 5x114.3 | 70.5 mm | — |
Forged wheels for the Panoz Esperante (5x114.3)
Shop all Panoz Esperante forged wheels →
Get a quote for Panoz Esperante wheels
Vehicles With the Same Hub as the Panoz Esperante (5x114.3, 70.5 mm Bore)
In our database, 153 other vehicle entries from 5 makes use exactly the same 5x114.3 bolt pattern and 70.5 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x114.3 is used by 20.1% of the vehicle entries in our database (1,284 of 6,396); 12.1% of those also use a 70.5 mm center bore.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 19x8.5J | ET35 | 6.13 in (156 mm) | — | — |
| Flush | 19x9J | ET30 | 6.18 in (157 mm) | +1 mm | +11 mm |
| Maximum | 20x9.5J | ET25 | 6.23 in (158 mm) | +3 mm | +23 mm |
Hub-Centric Rings for a 70.5 mm Center Bore
A wheel with a center bore larger than 70.5 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 71.6 mm | 71.6 → 70.5 mm |
| 72.6 mm | 72.6 → 70.5 mm |
| 73.1 mm | 73.1 → 70.5 mm |
| 74.1 mm | 74.1 → 70.5 mm |
ANKUSI forged wheels are bored to exactly 70.5 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Panoz Esperante?
The Panoz Esperante uses a 5x114.3 bolt pattern with a 70.5mm center bore across every Esperante variant in our database (2 guides, 2015).
What is the Panoz Esperante center bore?
The hub-centric center bore is 70.5 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Panoz Esperante years share the same wheel fitment?
The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.
Which forged wheels fit the Panoz Esperante?
Any wheel drilled 5x114.3 with a 70.5mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.