Nissan Micra Bolt Pattern, Center Bore & Wheel Offset (2002–2026)

Nissan Micra wheel fitment: 4x100 bolt pattern, 60.1mm center bore (2002–2026).

  • 4x100bolt pattern (PCD)
  • 60.1 mmcenter bore
  • M12x1.25 Nutwheel bolt / nut
  • 9 guidesmodel years 2002–2026

Nissan Micra wheel specs by year and trim

YearModel / trimBolt patternCenter boreOE wheel
2026Nissan Micra EV4x10060.1 mm17x6.5J
2021Nissan Micra4x10060.1 mm17x6.5J
2017Nissan Micra4x10060.1 mm17x6.5J
2014Nissan Micra4x10060.1 mm15x5.5J
2011Nissan Micra4x10060.1 mm15x5.5J
2005Nissan Micra4x10060.1 mm14x5.0J
2005Nissan Micra 160SR4x10060.1 mm16x6.0J
2005Nissan Micra C+C4x10060.1 mm15x5.5J
2002Nissan Micra4x10060.1 mm14x5.0J

Factory wheel sizes on the Nissan Micra

Across the 9 Nissan Micra trims with a documented factory wheel, the OE diameter is 14-17 inch, width 5-6.5J. A forged wheel that keeps the 4x100 bolt pattern and the 60.1 mm hub bore and matches the factory offset listed on the model page bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.

Forged wheels for the Nissan Micra (4x100)

Shop all Nissan Micra forged wheels →

Get a quote for Nissan Micra wheels

Vehicles With the Same Hub as the Nissan Micra (4x100, 60.1 mm Bore)

In our database, 125 other vehicle entries from 9 makes use exactly the same 4x100 bolt pattern and 60.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.

4x100 is used by 6.9% of the vehicle pages in our English fitment guide (451 of 6,503); 33.3% of those also use a 60.1 mm center bore.

Offset and Backspacing: Factory Wheel vs Options

Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.

SetupSizeETBackspacingInward vs OEOutward vs OE
Factory (OE)17x6.5JET385.25 in (133 mm)——
Flush17x7.5JET305.43 in (138 mm)+5 mm+21 mm
Maximum18x7.5JET285.35 in (136 mm)+3 mm+23 mm

Hub-Centric Rings for a 60.1 mm Center Bore

A wheel with a center bore larger than 60.1 mm needs a hub-centric ring. The most common combinations:

Wheel boreRing size
63.4 mm63.4 → 60.1 mm
64.1 mm64.1 → 60.1 mm
65.1 mm65.1 → 60.1 mm
66.1 mm66.1 → 60.1 mm
73.1 mm73.1 → 60.1 mm

ANKUSI forged wheels are bored to exactly 60.1 mm for this vehicle, so no ring is needed.

Sources and Last Update

Bolt pattern and center bore were checked against at least two independent fitment references before publication.

This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).

Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.

FAQ

What is the bolt pattern on a Nissan Micra?

The Nissan Micra uses a 4x100 bolt pattern with a 60.1mm center bore across every Micra variant in our database (9 guides, 2002–2026).

What is the Nissan Micra center bore?

The hub-centric center bore is 60.1 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.

Do all Nissan Micra years share the same wheel fitment?

The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.

Which forged wheels fit the Nissan Micra?

Any wheel drilled 4x100 with a 60.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.

Contact WhatsApp Get a Quote