MG TF Bolt Pattern, Center Bore & Wheel Offset (2003–2010)
MG TF wheel fitment: 4x95.25 bolt pattern, 56.6mm center bore (2003–2010). OE wheel sizes and offsets for every TF variant we cover (3 guides), plus flush and
- 4x95.25bolt pattern (PCD)
- 56.6 mmcenter bore
- M12x1.5 Nutwheel bolt / nut
- 3 guidesmodel years 2003–2010
MG TF wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2010 | MG TF | 4x95.25 | 56.6 mm | — |
| 2008 | MG TF LE500 | 4x95.25 | 56.6 mm | — |
| 2003 | MG TF 160 | 4x95.25 | 56.6 mm | — |
Vehicles With the Same Hub as the MG TF (4x95.25, 56.6 mm Bore)
In our database, 2 other Lotus entries use exactly the same 4x95.25 bolt pattern and 56.6 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
4x95.25 is used by 0.1% of the vehicle entries in our database (7 of 6,503); 85.7% of those also use a 56.6 mm center bore.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 15x6J | ET28 | 4.60 in (117 mm) | — | — |
| Flush | 16x7J | ET20 | 4.79 in (122 mm) | +5 mm | +21 mm |
| Maximum | 16x7.5J | ET15 | 4.84 in (123 mm) | +6 mm | +32 mm |
Hub-Centric Rings for a 56.6 mm Center Bore
A wheel with a center bore larger than 56.6 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 57.1 mm | 57.1 → 56.6 mm |
| 60.1 mm | 60.1 → 56.6 mm |
| 63.4 mm | 63.4 → 56.6 mm |
| 64.1 mm | 64.1 → 56.6 mm |
| 73.1 mm | 73.1 → 56.6 mm |
ANKUSI forged wheels are bored to exactly 56.6 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a MG TF?
The MG TF uses a 4x95.25 bolt pattern with a 56.6mm center bore across every TF variant in our database (3 guides, 2003–2010).
What is the MG TF center bore?
The hub-centric center bore is 56.6 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all MG TF years share the same wheel fitment?
The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.
Which forged wheels fit the MG TF?
Any wheel drilled 4x95.25 with a 56.6mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.