Lexus ES330 Bolt Pattern, Center Bore & Wheel Offset (2004–2005)
Lexus ES330 wheel fitment: 5x114.3 bolt pattern, 60.1mm center bore (2004–2005). OE wheel sizes and offsets for every ES330 variant we cover (2 guides), plus
- 5x114.3bolt pattern (PCD)
- 60.1 mmcenter bore
- M12x1.5 Nutwheel bolt / nut
- 2 guidesmodel years 2004–2005
Lexus ES330 wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2005 | Lexus ES330 | 5x114.3 | 60.1 mm | 16x6.5J ET50 |
| 2004 | Lexus ES330 Sport Design | 5x114.3 | 60.1 mm | 16x6.5J ET50 |
Factory wheel sizes on the Lexus ES330
Across the 2 Lexus ES330 trims with a documented factory wheel, the OE diameter is 16 inch, width 6.5J and offset ET50. A forged wheel that keeps the 5x114.3 bolt pattern and the 60.1 mm hub bore and stays inside that offset range bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Forged wheels for the Lexus ES330 (5x114.3)
Shop all Lexus ES330 forged wheels →
Get a quote for Lexus ES330 wheels
Vehicles With the Same Hub as the Lexus ES330 (5x114.3, 60.1 mm Bore)
In our database, 154 other vehicle entries from 18 makes use exactly the same 5x114.3 bolt pattern and 60.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x114.3 is used by 20.0% of the vehicle entries in our database (1,300 of 6,503); 16.8% of those also use a 60.1 mm center bore.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 16x6.5J | ET50 | 5.72 in (145 mm) | — | — |
| Flush | 18x8J | ET35 | 5.88 in (149 mm) | +4 mm | +34 mm |
| Maximum | 19x8.5J | ET30 | 5.93 in (151 mm) | +5 mm | +45 mm |
Hub-Centric Rings for a 60.1 mm Center Bore
A wheel with a center bore larger than 60.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 63.4 mm | 63.4 → 60.1 mm |
| 64.1 mm | 64.1 → 60.1 mm |
| 65.1 mm | 65.1 → 60.1 mm |
| 66.1 mm | 66.1 → 60.1 mm |
| 73.1 mm | 73.1 → 60.1 mm |
ANKUSI forged wheels are bored to exactly 60.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Lexus ES330?
The Lexus ES330 uses a 5x114.3 bolt pattern with a 60.1mm center bore across every ES330 variant in our database (2 guides, 2004–2005).
What is the Lexus ES330 center bore?
The hub-centric center bore is 60.1 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Lexus ES330 years share the same wheel fitment?
The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.
Which forged wheels fit the Lexus ES330?
Any wheel drilled 5x114.3 with a 60.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.