Lada 4x4 Bolt Pattern, Center Bore & Wheel Offset (2005–2021)
Lada 4x4 wheel fitment: 5x139.7 bolt pattern, 98.1mm center bore (2005–2021). OE wheel sizes and offsets for every 4x4 variant we cover (4 guides), plus flush
- 5x139.7bolt pattern (PCD)
- 98.1 mmcenter bore
- Boltwheel bolt / nut
- 4 guidesmodel years 2005–2021
Lada 4x4 wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2021 | Lada 4x4 | 5x139.7 | 98.1 mm | 16x5J |
| 2014 | Lada 4x4 | 5x139.7 | 98.1 mm | 16x5J |
| 2013 | Lada 4x4 | 5x139.7 | 98.1 mm | 16x5J |
| 2005 | Lada 4x4 | 5x139.7 | 98.1 mm | 16x5J |
Factory wheel sizes on the Lada 4x4
Across the 4 Lada 4x4 trims with a documented factory wheel, the OE diameter is 16 inch, width 5J. A forged wheel that keeps the 5x139.7 bolt pattern and the 98.1 mm hub bore and matches the factory offset listed on the model page bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Forged wheels for the Lada 4x4 (5x139.7)
Get a quote for Lada 4x4 wheels
Vehicles With the Same Hub as the Lada 4x4 (5x139.7, 98.1 mm Bore)
No other make in our database pairs 5x139.7 with a 98.1 mm center bore, so wheels taken from other brands need a hub-centric ring or a custom bore.
5x139.7 is used by 0.9% of the vehicle entries in our database (56 of 6,396); 1.8% of those also use a 98.1 mm center bore.
Hub-Centric Rings for a 98.1 mm Center Bore
A wheel with a center bore larger than 98.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 100.1 mm | 100.1 → 98.1 mm |
| 106.1 mm | 106.1 → 98.1 mm |
| 108.1 mm | 108.1 → 98.1 mm |
| 110.1 mm | 110.1 → 98.1 mm |
ANKUSI forged wheels are bored to exactly 98.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Lada 4x4?
The Lada 4x4 uses a 5x139.7 bolt pattern with a 98.1mm center bore across every 4x4 variant in our database (4 guides, 2005–2021).
What is the Lada 4x4 center bore?
The hub-centric center bore is 98.1 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Lada 4x4 years share the same wheel fitment?
The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.
Which forged wheels fit the Lada 4x4?
Any wheel drilled 5x139.7 with a 98.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.