Kleemann Mercedes-Benz C Bolt Pattern, Center Bore & Wheel Offset (2004–2005)
Kleemann Mercedes-Benz C wheel fitment: 5x112 bolt pattern, 66.6mm center bore (2004–2005). OE wheel sizes and offsets for every Mercedes-Benz C variant we co
- 5x112bolt pattern (PCD)
- 66.6 mmcenter bore
- M14x1.5 Boltwheel bolt / nut
- 2 guidesmodel years 2004–2005
Kleemann Mercedes-Benz C wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2005 | Kleemann Mercedes-Benz C 20K | 5x112 | 66.6 mm | — |
| 2004 | Kleemann Mercedes-Benz C 55K S8 | 5x112 | 66.6 mm | — |
Forged wheels for the Kleemann Mercedes-Benz C (5x112)
Shop all Kleemann Mercedes-Benz C forged wheels →
Get a quote for Kleemann Mercedes-Benz C wheels
Vehicles With the Same Hub as the Kleemann Mercedes-Benz C (5x112, 66.6 mm Bore)
In our database, 810 other vehicle entries from 20 makes use exactly the same 5x112 bolt pattern and 66.6 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x112 is used by 21.9% of the vehicle entries in our database (1,403 of 6,396); 58.6% of those also use a 66.6 mm center bore.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 19x8.5J | ET35 | 6.13 in (156 mm) | — | — |
| Flush | 19x8.5J | ET30 | 5.93 in (151 mm) | −5 mm | +5 mm |
| Maximum | 19x9J | ET28 | 6.10 in (155 mm) | −1 mm | +13 mm |
Hub-Centric Rings for a 66.6 mm Center Bore
A wheel with a center bore larger than 66.6 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 67.1 mm | 67.1 → 66.6 mm |
| 70.1 mm | 70.1 → 66.6 mm |
| 70.5 mm | 70.5 → 66.6 mm |
| 71.6 mm | 71.6 → 66.6 mm |
| 73.1 mm | 73.1 → 66.6 mm |
ANKUSI forged wheels are bored to exactly 66.6 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Kleemann Mercedes-Benz C?
The Kleemann Mercedes-Benz C uses a 5x112 bolt pattern with a 66.6mm center bore across every Mercedes-Benz C variant in our database (2 guides, 2004–2005).
What is the Kleemann Mercedes-Benz C center bore?
The hub-centric center bore is 66.6 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Kleemann Mercedes-Benz C years share the same wheel fitment?
The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.
Which forged wheels fit the Kleemann Mercedes-Benz C?
Any wheel drilled 5x112 with a 66.6mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.