Geely Uliou Bolt Pattern, Center Bore & Wheel Offset (2004–2008)

Geely Uliou wheel fitment: 4x100 bolt pattern, 56.1mm center bore (2004–2008).

  • 4x100bolt pattern (PCD)
  • 56.1 mmcenter bore
  • M12x1.5 Nutwheel bolt / nut
  • 4 guidesmodel years 2004–2008

Geely Uliou wheel specs by year and trim

YearModel / trimBolt patternCenter boreOE wheel
2008Geely Uliou4x10056.1 mm14x5J
2006Geely Uliou4x10056.1 mm14x5J
2005Geely Uliou4x10056.1 mm14x5J
2004Geely Uliou4x10056.1 mm14x5J

Factory wheel sizes on the Geely Uliou

Across the 4 Geely Uliou trims with a documented factory wheel, the OE diameter is 14 inch, width 5J. A forged wheel that keeps the 4x100 bolt pattern and the 56.1 mm hub bore and matches the factory offset listed on the model page bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.

Vehicles With the Same Hub as the Geely Uliou (4x100, 56.1 mm Bore)

In our database, 38 other vehicle entries from 8 makes use exactly the same 4x100 bolt pattern and 56.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.

4x100 is used by 6.9% of the vehicle pages in our English fitment guide (451 of 6,503); 9.1% of those also use a 56.1 mm center bore.

Hub-Centric Rings for a 56.1 mm Center Bore

A wheel with a center bore larger than 56.1 mm needs a hub-centric ring. The most common combinations:

Wheel boreRing size
57.1 mm57.1 → 56.1 mm
60.1 mm60.1 → 56.1 mm
63.4 mm63.4 → 56.1 mm
64.1 mm64.1 → 56.1 mm
73.1 mm73.1 → 56.1 mm

ANKUSI forged wheels are bored to exactly 56.1 mm for this vehicle, so no ring is needed.

Sources and Last Update

Bolt pattern and center bore were checked against at least two independent fitment references before publication.

This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).

Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.

FAQ

What is the bolt pattern on a Geely Uliou?

The Geely Uliou uses a 4x100 bolt pattern with a 56.1mm center bore across every Uliou variant in our database (4 guides, 2004–2008).

What is the Geely Uliou center bore?

The hub-centric center bore is 56.1 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.

Do all Geely Uliou years share the same wheel fitment?

The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.

Which forged wheels fit the Geely Uliou?

Any wheel drilled 4x100 with a 56.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.

Contact WhatsApp Get a Quote