Cadillac Eldorado Bolt Pattern, Center Bore & Wheel Offset (1953–2001)
Cadillac Eldorado wheel fitment: 5x127 bolt pattern, 108mm center bore (1953–1964); 5x127 bolt pattern, 78.1mm center bore (1967–1976). OE wheel sizes and off
- 5x127bolt pattern (PCD), most common
- 108 mmcenter bore
- M12x1.5 Nutwheel bolt / nut
- 14 guidesmodel years 1953–2001
Bolt pattern by generation
- 5x127, 108 mm center bore — 1953–1964 (8 variants)
- 5x127, 78.1 mm center bore — 1967–1976 (3 variants)
- 5x120.65, 70.3 mm center bore — 1979–1984 (2 variants)
- 5x115, 70.3 mm center bore — 2001 (1 variants)
Cadillac Eldorado wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2001 | Cadillac Eldorado | 5x115 | 70.3 mm | 16x7J ET51 |
| 1984 | Cadillac Eldorado | 5x120.65 | 70.3 mm | 15x6.0J |
| 1979 | Cadillac Eldorado | 5x120.65 | 70.3 mm | 15x6J ET35 |
| 1976 | Cadillac Eldorado Convertible | 5x127 | 78.1 mm | 15x6J ET15 |
| 1971 | Cadillac Eldorado | 5x127 | 78.1 mm | 15x6.0J |
| 1967 | Cadillac Eldorado | 5x127 | 78.1 mm | 15x6J ET15 |
| 1964 | Cadillac Eldorado | 5x127 | 108 mm | 15x6.0J |
| 1962 | Cadillac Eldorado | 5x127 | 108 mm | 15x6.0J |
| 1960 | Cadillac Eldorado | 5x127 | 108 mm | 15x6.0J |
| 1959 | Cadillac Eldorado | 5x127 | 108 mm | 15x6.0J |
| 1957 | Cadillac Eldorado | 5x127 | 108 mm | 15x6.0J |
| 1956 | Cadillac Eldorado | 5x127 | 108 mm | 15x6.0J |
| 1954 | Cadillac Eldorado | 5x127 | 108 mm | 15x6.0J |
| 1953 | Cadillac Eldorado | 5x127 | 108 mm | 15x6.0J |
Factory wheel sizes on the Cadillac Eldorado
Across the 14 Cadillac Eldorado trims with a documented factory wheel, the OE diameter is 15-16 inch, width 6-7J and offset ET15-51. A forged wheel that keeps the bolt pattern and hub bore of your generation (see the table above) and stays inside that offset range bolts on without spacers or hub rings. The offset spread between trims is 36 mm, so read the year-by-year row for your exact car before choosing a width. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Forged wheels for the Cadillac Eldorado (5x127)
Shop all Cadillac Eldorado forged wheels →
Get a quote for Cadillac Eldorado wheels
Vehicles With the Same Hub as the Cadillac Eldorado (5x127, 108 mm Bore)
No other make in our database pairs 5x127 with a 108 mm center bore, so wheels taken from other brands need a hub-centric ring or a custom bore.
5x127 is used by 1.3% of the vehicle entries in our database (80 of 6,396); 1.3% of those also use a 108 mm center bore.
Hub-Centric Rings for a 108 mm Center Bore
A wheel with a center bore larger than 108 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 108.1 mm | 108.1 → 108 mm |
| 110.1 mm | 110.1 → 108 mm |
| 130.1 mm | 130.1 → 108 mm |
ANKUSI forged wheels are bored to exactly 108 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Cadillac Eldorado?
The Cadillac Eldorado uses a 5x127 bolt pattern on most variants we cover with a 108mm center bore. Other generations use 5x127 / 78.1mm (1967–1976), 5x120.65 / 70.3mm (1979–1984), 5x115 / 70.3mm (2001–2001). Always check the exact year and trim before ordering.
What is the Cadillac Eldorado center bore?
The hub-centric center bore is 108 mm on the most common generation; see the table for variants. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Cadillac Eldorado years share the same wheel fitment?
No. The bolt pattern or center bore changed between generations, so wheels are not interchangeable across all years. Use the year-by-year table on this page to pick the right specification.
Which forged wheels fit the Cadillac Eldorado?
Any wheel drilled 5x127 with a 108mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.