Alfa Romeo MiTo Quadrifoglio Bolt Pattern, Center Bore & Wheel Offset (2010–2014)
Alfa Romeo MiTo Quadrifoglio wheel fitment: 4x98 bolt pattern, 58.1mm center bore (2010–2014). OE wheel sizes and offsets for every MiTo Quadrifoglio variant
- 4x98bolt pattern (PCD)
- 58.1 mmcenter bore
- M12x1.5 Nutwheel bolt / nut
- 2 guidesmodel years 2010–2014
Alfa Romeo MiTo Quadrifoglio wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2014 | Alfa Romeo MiTo Quadrifoglio Verde | 4x98 | 58.1 mm | 17x7.0J |
| 2010 | Alfa Romeo MiTo Quadrifoglio Verde | 4x98 | 58.1 mm | 17x7.0J |
Factory wheel sizes on the Alfa Romeo MiTo Quadrifoglio
Across the 2 Alfa Romeo MiTo Quadrifoglio trims with a documented factory wheel, the OE diameter is 17 inch, width 7J. A forged wheel that keeps the 4x98 bolt pattern and the 58.1 mm hub bore and matches the factory offset listed on the model page bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Forged wheels for the Alfa Romeo MiTo Quadrifoglio (4x98)
Shop all Alfa Romeo MiTo Quadrifoglio forged wheels →
Get a quote for Alfa Romeo MiTo Quadrifoglio wheels
Vehicles With the Same Hub as the Alfa Romeo MiTo Quadrifoglio (4x98, 58.1 mm Bore)
In our database, 45 other vehicle entries from 8 makes use exactly the same 4x98 bolt pattern and 58.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
4x98 is used by 1.1% of the vehicle entries in our database (74 of 6,503); 73.0% of those also use a 58.1 mm center bore.
Hub-Centric Rings for a 58.1 mm Center Bore
A wheel with a center bore larger than 58.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 60.1 mm | 60.1 → 58.1 mm |
| 63.4 mm | 63.4 → 58.1 mm |
| 64.1 mm | 64.1 → 58.1 mm |
| 65.1 mm | 65.1 → 58.1 mm |
| 73.1 mm | 73.1 → 58.1 mm |
ANKUSI forged wheels are bored to exactly 58.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Alfa Romeo MiTo Quadrifoglio?
The Alfa Romeo MiTo Quadrifoglio uses a 4x98 bolt pattern with a 58.1mm center bore across every MiTo Quadrifoglio variant in our database (2 guides, 2010–2014).
What is the Alfa Romeo MiTo Quadrifoglio center bore?
The hub-centric center bore is 58.1 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Alfa Romeo MiTo Quadrifoglio years share the same wheel fitment?
The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.
Which forged wheels fit the Alfa Romeo MiTo Quadrifoglio?
Any wheel drilled 4x98 with a 58.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.