Mitsubishi OEM-Style Bronze Mesh Forged Wheels
Monoblock · Bronze
2027 Mitsubishi Eclipse Sportback Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Mitsubishi Eclipse Sportback wheels? This page gives the 2027 Mitsubishi Eclipse Sportback bolt pattern (5x114.3), centre bore, factory rim size and the offset range for aftermarket and forged Mitsubishi Eclipse Sportback rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2027 Mitsubishi Eclipse Sportback uses a 5x114.3 bolt pattern with a 67.1 mm centre bore and M12x1.5 lug nuts. Factory wheels: 19x7.5J ET45. For aftermarket wheels, 20x8.5J ET38 sits flush.
Forged wheels for the 2027 Mitsubishi Eclipse Sportback — drilled 5x114.3 with a 67.1 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Mitsubishi Eclipse Sportback (2027): 5x114.3 bolt pattern, 67.1mm center bore, OE 19x7.5J ET45. Forged wheel fitment specs from ANKUSI.
Bolt Pattern5x114.3
Wheel Bolt/NutM12x1.5 Nut
Center Bore67.1mm
Wheel Load Rating650–750 kg/wheel (Standard Passenger Car segment reference)
Year2027
Category5-Lug Standard Sedan
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 19x7.5J ET45 |
| Flush Fitment | 20x8.5J at ET38 offset |
Forged Wheel Designs for the Mitsubishi Eclipse Sportback
Every design below is forged to order, so it can be machined to the Mitsubishi Eclipse Sportback's 5x114.3 bolt pattern and 67.1 mm center bore, with the width and offset calculated for your setup.
Mitsubishi OEM-Style Gunmetal 10-Spoke Forged Wheels
Monoblock · Gunmetal
Gloss Black 5-Spoke Machined Face Forged Wheels
Monoblock · Gloss Black
Honda Civic Type R Forged Wheels
Monoblock
Advan-Style Gunmetal 6-Spoke Polished-Lip Forged Wheels
Deep Dish · Gunmetal
Gloss Black Milled Mesh Forged Wheels
Off-Road Beadlock · Gloss Black
Vossen Side-Milled Gold 5 V-Spoke Forged Wheels
Replica · Side-milled Gold
Gloss Black 5 Y-Spoke Concave Forged Wheels
Concave · Gloss Black
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
A sedan's wheel spec is a balance point the factory tuned between ride comfort, steering feel, and everyday durability. Forging lets us hold that same structural margin while cutting rotational mass, which is where most of the real-world benefit — quicker steering response, marginally better ride — actually comes from.
The Mitsubishi Eclipse Sportback ships from the factory on a 5x114.3 bolt pattern with a 67.1mm center bore and a 19x7.5J ET45 wheel. Our flush reference for the Mitsubishi Eclipse Sportback is 20x8.5J ET38.; our maximum aggressive reference is 20x9J ET35. — beyond that, expect clearance issues against the fender liner without further modification.
Mitsubishi Eclipse Sportback OE Wheel Specs
The Mitsubishi Eclipse Sportback ships from the factory on 5x114.3 bolt pattern wheels with a 67.1mm center bore. The stock wheel size is 19x7.5J ET45, offering a balanced ride that suits most owners without any rubbing or clearance concerns.
Why the factory spec works for most owners:
- Balances ride comfort with steering response and highway efficiency.
- Wide tire and wheel availability at the factory diameter keeps replacement costs low.
- Lower unsprung weight than larger aftermarket wheels helps ride quality and acceleration.
- Guaranteed clearance against brake calipers and suspension components.
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Mitsubishi Eclipse Sportback (2027) we drill the 5x114.3 pattern and cut the centre bore to 67.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 19x7.5J | ET45 | 6.02 in (153 mm) | — | — |
| Flush | 20x8.5J | ET38 | 6.25 in (159 mm) | +6 mm | +20 mm |
| Maximum | 20x9J | ET35 | 6.38 in (162 mm) | +9 mm | +29 mm |
Vehicles With the Same Hub as the Mitsubishi Eclipse Sportback (5x114.3, 67.1 mm Bore)
In our database, 456 other vehicle entries from 30 makes use exactly the same 5x114.3 bolt pattern and 67.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x114.3 is used by 20.0% of the vehicle pages in our English fitment guide (1,300 of 6,503); 35.2% of those also use a 67.1 mm center bore.
Hub-Centric Rings for a 67.1 mm Center Bore
A wheel with a center bore larger than 67.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 70.1 mm | 70.1 → 67.1 mm |
| 70.5 mm | 70.5 → 67.1 mm |
| 71.6 mm | 71.6 → 67.1 mm |
| 72.6 mm | 72.6 → 67.1 mm |
| 73.1 mm | 73.1 → 67.1 mm |
ANKUSI forged wheels are bored to exactly 67.1 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Mitsubishi Eclipse Sportback use?
The 2027 Mitsubishi Eclipse Sportback uses a 5x114.3 bolt pattern.
How many lug bolts does the Mitsubishi Eclipse Sportback use?
The Mitsubishi Eclipse Sportback uses a 5-lug bolt pattern (5x114.3), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Mitsubishi Eclipse Sportback?
The Mitsubishi Eclipse Sportback's center bore is 67.1mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Mitsubishi Eclipse Sportback?
Factory wheels on the Mitsubishi Eclipse Sportback are 19x7.5J ET45.
What does a flush wheel fitment look like on the Mitsubishi Eclipse Sportback?
For a flush look with minimal to no rubbing, we recommend 20x8.5J at ET38 offset as a starting point on a stock or mildly lowered Mitsubishi Eclipse Sportback.
Do I need wheel spacers for my Mitsubishi Eclipse Sportback?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Mitsubishi Eclipse Sportback?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 6.25" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Mitsubishi Eclipse Sportback?
The Mitsubishi Eclipse Sportback runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.
Sources and Last Update
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 19x7.5 wheels · 19 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.