APEX-Style Champagne Gold 10-Spoke Forged Wheels
Monoblock · Champagne Gold
2025 MG Cyberster Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting MG Cyberster wheels? This page gives the 2025 MG Cyberster bolt pattern (5x112), centre bore, factory rim size and the offset range for aftermarket and forged MG Cyberster rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2025 MG Cyberster uses a 5x112 bolt pattern with a 57.1 mm centre bore and M12x1.5 lug nuts. For aftermarket wheels, 20x9J ET28 front / 20x10J ET32 rear sits flush.
Forged wheels for the 2025 MG Cyberster — drilled 5x112 with a 57.1 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
MG Cyberster (2025): 5x112 bolt pattern, 57.1mm center bore, OE F 19x8.5J ET35 / R 20x9.5J ET40. Forged wheel fitment specs from ANKUSI.
Bolt Pattern5x112
Wheel Bolt/NutM12x1.5 Nut
Center Bore57.1mm
Wheel Load Rating700–850 kg/wheel (Performance / Sports Car segment reference)
Year2025
Category5-Lug Performance / Tuner
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Flush Fitment | F 20x9J ET28 / R 20x10J ET32 |
Forged Wheel Designs for the MG Cyberster
Every design below is forged to order, so it can be machined to the MG Cyberster's 5x112 bolt pattern and 57.1 mm center bore, with the width and offset calculated for your setup.
BBS RI-D-Style Gloss Black Gunmetal 5 Y-Spoke Forged Wheels
Monoblock · Gloss Black / Gunmetal
MD Off Road Gloss Black Deep Lip Exposed Bolt Detail Double Ring Lip Forged Wheels
Deep Dish · Gloss Black
Wheelforce-Style Brushed Silver 10 Split-Spoke Forged Wheels
Replica · Custom Finish
Gloss White 10 Directional-Spoke Polished Lip Forged Wheels
2-Piece · Gloss White
Edelweiss-Style LT3 Matte Silver 5 Y-Spoke Forged Wheels
Replica · Matte Silver
Bronze / Machined Mesh Forged Wheels
Monoblock · Bronze / Machined
HRE Performance P101-Style Brushed Silver 10-Spoke Forged Wheels
Replica · Brushed Silver
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
Most of the engineering value in a forged wheel over a cast one shows up in rotational mass, not outright strength — both can meet the same load rating, but the forged piece gets there lighter. On a sedan platform tuned for everyday balance, that weight saving is felt directly in steering response and ride quality.
The MG Cyberster ships from the factory on a 5x112 bolt pattern with a 57.1mm center bore and a F 19x8.5J ET35 / R 20x9.5J ET40 wheel. Our flush reference for the MG Cyberster is F 20x9J ET28 / R 20x10J ET32.; our maximum aggressive reference is F 21x9.5J ET25 / R 21x10.5J ET28. — beyond that, expect clearance issues against the fender liner without further modification.
MG Cyberster OE Wheel Specs
The MG Cyberster ships from the factory on 5x112 bolt pattern wheels with a 57.1mm center bore. The stock wheel size is F 19x8.5J ET35 / R 20x9.5J ET40, offering a balanced ride that suits most owners without any rubbing or clearance concerns.
Why the factory spec works for most owners:
- Balances ride comfort with steering response and highway efficiency.
- Wide tire and wheel availability at the factory diameter keeps replacement costs low.
- Lower unsprung weight than larger aftermarket wheels helps ride quality and acceleration.
- Guaranteed clearance against brake calipers and suspension components.
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the MG Cyberster (2025) we drill the 5x112 pattern and cut the centre bore to 57.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 19x8.5J | ET35 | 6.13 in (156 mm) | — | — |
| Flush | 20x9J | ET28 | 6.10 in (155 mm) | −1 mm | +13 mm |
| Maximum | 21x9.5J | ET25 | 6.23 in (158 mm) | +3 mm | +23 mm |
Vehicles With the Same Hub as the MG Cyberster (5x112, 57.1 mm Bore)
In our database, 407 other vehicle entries from 18 makes use exactly the same 5x112 bolt pattern and 57.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x112 is used by 21.6% of the vehicle pages in our English fitment guide (1,407 of 6,503); 29.0% of those also use a 57.1 mm center bore.
Hub-Centric Rings for a 57.1 mm Center Bore
A wheel with a center bore larger than 57.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 60.1 mm | 60.1 → 57.1 mm |
| 63.4 mm | 63.4 → 57.1 mm |
| 64.1 mm | 64.1 → 57.1 mm |
| 65.1 mm | 65.1 → 57.1 mm |
| 73.1 mm | 73.1 → 57.1 mm |
ANKUSI forged wheels are bored to exactly 57.1 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the MG Cyberster use?
The 2025 MG Cyberster uses a 5x112 bolt pattern.
How many lug bolts does the MG Cyberster use?
The MG Cyberster uses a 5-lug bolt pattern (5x112), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the MG Cyberster?
The MG Cyberster's center bore is 57.1mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What does a flush wheel fitment look like on the MG Cyberster?
For a flush look with minimal to no rubbing, we recommend F 20x9J ET28 / R 20x10J ET32 as a starting point on a stock or mildly lowered MG Cyberster.
Do I need wheel spacers for my MG Cyberster?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my MG Cyberster?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 6.1" backspacing up front and 6.76" in the rear.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my MG Cyberster?
Yes — the MG Cyberster's factory and our recommended flush/max fitments already use staggered sizing (different width front and rear), and ANKUSI can forge matching staggered sets to your target offsets.
Sources and Last Update
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 19x8.5 wheels · 19 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.