HRE-Style Transparent Gold Brushed 10-Spoke Forged Wheels
Monoblock · Transparent Gold
2026 McLaren Artura Spider MCL39 Championship Edition Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting McLaren Artura Spider MCL39 Championship Edition wheels? This page gives the 2026 McLaren Artura Spider MCL39 Championship Edition bolt pattern (5x112), centre bore, factory rim size and the offset range for aftermarket and forged McLaren Artura Spider MCL39 Championship Edition rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2026 McLaren Artura Spider MCL39 Championship Edition uses a 5x112 bolt pattern with a 66.5 mm centre bore and M14x1.5 lug nuts. For aftermarket wheels, 20x9J ET32 front / 20x11J ET38 rear sits flush.
Forged wheels for the 2026 McLaren Artura Spider MCL39 Championship Edition — drilled 5x112 with a 66.5 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
McLaren Artura Spider MCL39 Championship Edition (2026): 5x112 bolt pattern, 66.5mm center bore, OE F 19x8.5J ET38 / R 20x10.5J ET45.
Bolt Pattern5x112
Wheel Bolt/NutM14x1.5 Nut
Center Bore66.5mm
Wheel Load Rating700–850 kg/wheel (Performance / Sports Car segment reference)
Caliper TypeFixed multi-piston monoblock caliper, Akebono or Brembo (OEM, standard across McLaren lineup)
Year2026
Category5-Lug Supercar (2-Piece)
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Flush Fitment | F 20x9J ET32 / R 20x11J ET38 |
Forged Wheel Designs for the McLaren Artura Spider MCL39 Championship Edition
Every design below is forged to order, so it can be machined to the McLaren Artura Spider MCL39 Championship Edition's 5x112 bolt pattern and 66.5 mm center bore, with the width and offset calculated for your setup.
Novitec-Style Gloss Black Twin 5-Spoke Red-Cap Forged Wheels
Monoblock · Gloss Black
Porsche 911 Turbo S Forged Wheels
Monoblock
Metallic Gray 5-Spoke Forged Wheels
Monoblock · Metallic Gray
Wheelforce-Style Matte Silver 10-Spoke Star Concave Forged Wheels
Concave · Matte Silver
AMC Racing-Style Gloss Black Split-Spoke Mesh Forged Wheels
Monoblock · Gloss Black
Transparent Gray Brushed 10-Spoke Concave Forged Wheels
Concave · Transparent Gray
McLaren OEM-Style Black / Machined 10-Spoke Machined Face Forged Wheels
Monoblock · Black Machined
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
On a supercar, wheel weight is one of the few remaining places to cut rotational mass without touching the powertrain or chassis the factory already optimized. Forging gets there at the same structural margin as the OE wheel, which is exactly the trade a car built around outright performance rewards.
The McLaren Artura Spider MCL39 Championship Edition ships from the factory on a 5x112 bolt pattern with a 66.5mm center bore and a F 19x8.5J ET38 / R 20x10.5J ET45 wheel. Our flush reference for the McLaren Artura Spider MCL39 Championship Edition is F 20x9J ET32 / R 20x11J ET38.; our maximum aggressive reference is F 20x9.5J ET28 / R 20x11.5J ET35. — beyond that, expect clearance issues against the fender liner without further modification.
McLaren Artura Spider MCL39 Championship Edition OE Wheel Specs
The McLaren Artura Spider MCL39 Championship Edition ships from the factory on 5x112 bolt pattern wheels with a 66.5mm center bore. The stock wheel size is F 19x8.5J ET38 / R 20x10.5J ET45, offering a balanced ride that suits most owners without any rubbing or clearance concerns.
Why the factory spec works for most owners:
- Balances ride comfort with steering response and highway efficiency.
- Wide tire and wheel availability at the factory diameter keeps replacement costs low.
- Lower unsprung weight than larger aftermarket wheels helps ride quality and acceleration.
- Guaranteed clearance against brake calipers and suspension components.
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the McLaren Artura Spider MCL39 Championship Edition (2026) we drill the 5x112 pattern and cut the centre bore to 66.5mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset & Backspacing Reference
Backspacing is calculated as: wheel width (in) / 2 + offset (mm) / 25.4 + 0.5.
- OE 19x8.5J ET38: backspacing ≈ 6.25"
- Flush 20x9J ET32: backspacing ≈ 6.26"
- Max 20x9.5J ET28: backspacing ≈ 6.35"
Use our offset & backspacing calculator to fine-tune your fitment, or contact ANKUSI for a custom forged wheel quote for your McLaren Artura Spider MCL39 Championship Edition.
Vehicles With the Same Hub as the McLaren Artura Spider MCL39 Championship Edition (5x112, 66.5 mm Bore)
In our database, 167 other vehicle entries from 6 makes use exactly the same 5x112 bolt pattern and 66.5 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x112 is used by 21.6% of the vehicle pages in our English fitment guide (1,407 of 6,503); 11.9% of those also use a 66.5 mm center bore.
Hub-Centric Rings for a 66.5 mm Center Bore
A wheel with a center bore larger than 66.5 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 66.6 mm | 66.6 → 66.5 mm |
| 67.1 mm | 67.1 → 66.5 mm |
| 70.1 mm | 70.1 → 66.5 mm |
| 70.5 mm | 70.5 → 66.5 mm |
| 73.1 mm | 73.1 → 66.5 mm |
ANKUSI forged wheels are bored to exactly 66.5 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the McLaren Artura Spider MCL39 Championship Edition use?
The 2026 McLaren Artura Spider MCL39 Championship Edition uses a 5x112 bolt pattern.
How many lug bolts does the McLaren Artura Spider MCL39 Championship Edition use?
The McLaren Artura Spider MCL39 Championship Edition uses a 5-lug bolt pattern (5x112), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the McLaren Artura Spider MCL39 Championship Edition?
The McLaren Artura Spider MCL39 Championship Edition's center bore is 66.5mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What does a flush wheel fitment look like on the McLaren Artura Spider MCL39 Championship Edition?
For a flush look with minimal to no rubbing, we recommend F 20x9J ET32 / R 20x11J ET38 as a starting point on a stock or mildly lowered McLaren Artura Spider MCL39 Championship Edition.
Do I need wheel spacers for my McLaren Artura Spider MCL39 Championship Edition?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my McLaren Artura Spider MCL39 Championship Edition?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 6.26" backspacing up front and 7.5" in the rear.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my McLaren Artura Spider MCL39 Championship Edition?
Yes — the McLaren Artura Spider MCL39 Championship Edition's factory and our recommended flush/max fitments already use staggered sizing (different width front and rear), and ANKUSI can forge matching staggered sets to your target offsets.
Sources and Last Update
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.